S4 Chemistry Practice Paper 2 | Mole, titration, enthalpy, equilibrium and electrolysis calculations (with answers and marking scheme)
- 2026-11-16
S4 chemistry paper: moles and gas volume, titration, enthalpy, equilibrium and Kc, electrolysis with Faraday calculations and rate graphs; full answers and marks included.
1. Mole and molar gas volume (16 marks)
A student obtains a bottle of carbon dioxide in the laboratory. Relative atomic masses: C = 12.0, O = 16.0; Avogadro constant = 6.02 x 10^23 mol^-1; molar volume at room temperature and pressure = 24.0 dm3 mol^-1; at standard conditions = 22.4 dm3 mol^-1. The mass of the sample is 8.8 g.
| # | Question | Answer and marking notes |
|---|---|---|
| 1 | (a) Calculate the number of moles of carbon dioxide in the sample. | Answer: moles = mass / molar mass = 8.8 / 44.0 = 0.20 mol. |
| 2 | (b) Calculate the number of carbon dioxide molecules in the sample. | Answer: number of molecules = 0.20 x 6.02 x 10^23 = 1.20 x 10^23. |
| 3 | (c) Calculate the volume of the sample at room temperature and pressure. | Answer: volume = 0.20 x 24.0 = 4.8 dm3 (4800 cm3). |
| 4 | (d) If measured at standard conditions instead, what is the volume of the same number of moles? | Answer: volume = 0.20 x 22.4 = 4.48 dm3, i.e. 0.32 dm3 less than at room conditions. |
| 5 | (e) Calculate the number of moles of oxygen atoms and their total mass in 8.8 g of carbon dioxide. | Answer: each molecule has 2 oxygen atoms, so moles of O atoms = 0.20 x 2 = 0.40 mol; mass = 0.40 x 16.0 = 6.4 g. |
2. Dilution and acid-base titration (18 marks)
25.0 cm3 of sodium hydroxide solution is titrated with 0.100 M hydrochloric acid; the indicator changes from pink to colourless and the mean titre of three runs is 22.40 cm3. The reaction is HCl + NaOH -> NaCl + H2O.
| # | Question | Answer and marking notes |
|---|---|---|
| 6 | (a) Calculate the number of moles of hydrochloric acid used. | Answer: moles = 0.100 x 22.40 / 1000 = 2.24 x 10^-3 mol. |
| 7 | (b) Deduce the number of moles of sodium hydroxide from the equation. | Answer: the mole ratio of HCl to NaOH is 1 : 1, so NaOH = 2.24 x 10^-3 mol. |
| 8 | (c) Calculate the concentration of the sodium hydroxide solution in mol dm^-3. | Answer: concentration = 2.24 x 10^-3 / 0.0250 = 0.0896 M. |
| 9 | (d) If 25.0 cm3 of the sodium hydroxide solution is diluted with water to 250.0 cm3, find the new concentration. | Answer: the number of moles is unchanged, so concentration = 0.0896 x 25.0 / 250.0 = 0.00896 M (a tenfold dilution). |
| 10 | (e) 25.0 cm3 of the diluted solution is titrated with the same acid; find the volume of acid required. | Answer: moles of NaOH = 0.00896 x 0.0250 = 2.24 x 10^-4 mol; volume of acid = 2.24 x 10^-4 / 0.100 = 2.24 x 10^-3 dm3 = 2.24 cm3. |
3. Enthalpy of combustion and heat calculation (16 marks)
Burning 0.500 g of ethanol (C2H5OH, molar mass 46.0 g mol^-1) raises the temperature of 100 g of water from 22.0 C to 40.0 C. Specific heat capacity of water = 4.2 J g^-1 K^-1; assume all heat is transferred to the water.
| # | Question | Answer and marking notes |
|---|---|---|
| 11 | (a) Calculate the number of moles of ethanol burnt. | Answer: moles = 0.500 / 46.0 = 0.0109 mol (1.09 x 10^-2 mol). |
| 12 | (b) Calculate the heat absorbed by the water in kJ. | Answer: temperature rise = 18.0 K; heat = 100 x 4.2 x 18.0 = 7560 J = 7.56 kJ. |
| 13 | (c) Hence estimate the enthalpy of combustion of ethanol in kJ mol^-1. | Answer: heat per mole = 7.56 / 0.0109 = 695 kJ mol^-1, so the enthalpy of combustion is about -695 kJ mol^-1. |
| 14 | (d) The literature value is -1367 kJ mol^-1. Give two reasons why the calculated value is much smaller. | Answer: (1) heat is lost to the air and apparatus, so not all of it heats the water; (2) some ethanol evaporates or burns incompletely; (3) heat capacity of the container and thermometer error are ignored. |
| 15 | (e) Using the value in (c), what mass of ethanol must be burnt to heat 500 g of water from 20 C to 50 C? | Answer: heat needed = 500 x 4.2 x 30 = 63000 J = 63.0 kJ; moles = 63.0 / 695 = 0.0906 mol; mass = 0.0906 x 46.0 = 4.17 g. |
4. Chemical equilibrium and the equilibrium constant (16 marks)
At a fixed temperature, 0.100 mol each of hydrogen and iodine vapour are sealed in a 1.00 dm3 vessel: H2(g) + I2(g) in a reversible reaction giving 2HI(g). At equilibrium the concentration of hydrogen iodide is 0.120 M.
| # | Question | Answer and marking notes |
|---|---|---|
| 16 | (a) Find the change in concentration of hydrogen. | Answer: forming 0.120 M HI uses 0.060 M H2 (1 : 2 ratio), so hydrogen falls by 0.060 M. |
| 17 | (b) Find the equilibrium concentrations of hydrogen and iodine vapour. | Answer: both are 0.100 – 0.060 = 0.040 M. |
| 18 | (c) Calculate the equilibrium constant Kc at this temperature. | Answer: Kc = [HI]^2 / ([H2][I2]) = (0.120)^2 / (0.040 x 0.040) = 0.0144 / 0.0016 = 9.0. |
| 19 | (d) If a further 0.020 mol of hydrogen is added at constant volume, how do the position of equilibrium and Kc change? | Answer: the hydrogen concentration rises, so equilibrium shifts to the right, increasing HI and decreasing I2; Kc depends only on temperature, so Kc is unchanged. |
| 20 | (e) If the vessel is compressed to 0.50 dm3 at constant temperature, does Kc change? Explain. | Answer: Kc does not change because Kc depends only on temperature; all concentrations double and the reaction quotient keeps the same value, so the system stays at equilibrium. |
5. Electrolysis and Faraday calculations (18 marks)
Copper(II) sulphate solution is electrolysed with a steady current of 2.00 A for 30.0 minutes using copper electrodes. Faraday constant = 96 500 C mol^-1; relative atomic mass of Cu = 64.0.
| # | Question | Answer and marking notes |
|---|---|---|
| 21 | (a) Calculate the quantity of charge passed. | Answer: time = 30.0 x 60 = 1800 s; charge = 2.00 x 1800 = 3600 C. |
| 22 | (b) Calculate the number of moles of electrons passed. | Answer: moles of electrons = 3600 / 96500 = 0.0373 mol. |
| 23 | (c) From the half equation Cu^2+ + 2e^- -> Cu, find the moles of copper deposited at the cathode. | Answer: 2 mol of electrons give 1 mol of Cu, so copper = 0.0373 / 2 = 0.0187 mol. |
| 24 | (d) Calculate the increase in mass of the cathode. | Answer: mass = 0.0187 x 64.0 = 1.19 g. |
| 25 | (e) If the current efficiency is only 90%, what mass is actually deposited, and what happens at the anode? | Answer: actual mass = 1.19 x 0.90 = 1.07 g; the anode dissolves and loses about 1.07 g, so the Cu^2+ concentration stays roughly constant. |
6. Reaction rate and gas volume graph (16 marks)
A strip of magnesium is added to excess 1.0 M hydrochloric acid and the volume of hydrogen is measured with a gas syringe: time s / volume cm3 = 0 / 0, 20 / 28, 40 / 46, 60 / 58, 80 / 64; the volume no longer changes after 80 s.
| # | Question | Answer and marking notes |
|---|---|---|
| 26 | (a) Calculate the average rate over the first 20 s in cm3 s^-1. | Answer: rate = (28 – 0) / 20 = 1.4 cm3 s^-1. |
| 27 | (b) Calculate the average rate between 20 s and 40 s. | Answer: rate = (46 – 28) / 20 = 0.90 cm3 s^-1. |
| 28 | (c) Explain why the rate decreases with time. | Answer: the acid concentration and the surface area of magnesium fall as the reaction proceeds, so collisions are less frequent and the rate decreases. |
| 29 | (d) Calculate the percentage of the reaction completed at 40 s. | Answer: final volume is 64 cm3; percentage = 46 / 64 x 100% = 71.9%. |
| 30 | (e) If 0.50 M acid is used instead with magnesium still in excess, how do the initial slope and final volume differ? | Answer: the lower concentration gives a smaller initial slope and a flatter curve; with magnesium in excess the limiting reagent changes, so the final volume is smaller. |
| 31 | (f) If the same mass of magnesium is used as a powder instead of a strip, how does the curve change? Explain. | Answer: the much larger surface area makes the initial rate higher and the curve steeper, but the same amount of magnesium gives the same final volume. |
Find a tutor — freeTutor Registration →
A TutorZone practice paper; original questions and passages, not publisher material.



