S4 Chemistry Practice Paper (Set 1): Mole Calculations and Stoichiometry, Solution Concentration and Dilution, Acid-Base Titration and pH, Redox and Electron Transfer, Reaction Rate and Half-life, Thermochemistry and Enthalpy (100 marks)
- 2026-11-22
S4 Chemistry Practice Paper (Set 1): 24 parts on moles, gas volume, limiting reagent, dilution, pH, Ka, redox titration, half-life and enthalpy, with a full answer key.
Section A: Moles and Stoichiometry (16 marks)
Show all working. Molar masses: CaCO3 100, H2 2.0, O2 32, H2O 18, NH4NO3 80, Zn 65. Take the molar volume of a gas at room temperature as 24.0 dm3/mol.
| # | Question | Answer and marking notes |
|---|---|---|
| 1 | 25.0 g of calcium carbonate (CaCO3, molar mass 100 g/mol) is heated until it decomposes completely into calcium oxide and carbon dioxide. Find the moles of calcium carbonate and the volume of carbon dioxide at room temperature. | Moles = 25.0 / 100 = 0.25 mol; 1 mol CaCO3 gives 1 mol CO2, so carbon dioxide = 0.25 mol; volume = 0.25 x 24.0 = 6 dm3. |
| 2 | 4.00 g of hydrogen burns completely in excess oxygen to form water (2H2 + O2 → 2H2O). Find the moles and mass of water formed, and the mass of oxygen used. | Hydrogen = 4.00 / 2.0 = 2 mol; water = 2 mol, mass = 2 x 18 = 36 g; oxygen = 1.00 mol, mass = 32 g. |
| 3 | Ammonium nitrate (NH4NO3, molar mass 80.0 g/mol) is a common fertiliser. Find the percentage by mass of nitrogen in it. | Each mole contains 2 nitrogen atoms, so nitrogen = 2 x 14.0 = 28.0 g; percentage = 28.0 / 80.0 x 100% = 35%. |
| 4 | 0.100 mol of zinc is added to 0.150 mol of hydrochloric acid (Zn + 2HCl → ZnCl2 + H2). Find the limiting reagent, the moles and volume of hydrogen formed, and the moles of zinc left over. | 0.100 mol of zinc needs 0.200 mol of acid but only 0.150 mol is present, so the acid is limiting; hydrogen = 0.150 / 2 = 0.075 mol, volume = 0.075 x 24.0 = 1.8 dm3; zinc used = 0.075 mol, left = 0.100 − 0.075 = 0.025 mol. |
Section B: Solution Concentration and Dilution (16 marks)
Give concentrations in mol/dm3. The moles of solute do not change on dilution, so use c1V1 = c2V2.
| # | Question | Answer and marking notes |
|---|---|---|
| 5 | 5.85 g of sodium chloride (molar mass 58.5 g/mol) is dissolved in water and made up to 250.0 cm3. Find the concentration. | Moles = 5.85 / 58.5 = 0.100 mol; volume = 0.250 dm3; concentration = 0.100 / 0.250 = 0.4 mol/dm3. |
| 6 | 25.0 cm3 of the 0.400 mol/dm3 solution is diluted with water to 250.0 cm3. Find the moles of solute and the new concentration. | Solute = 0.400 x 0.0250 = 0.01 mol; new concentration = 0.01 / 0.250 = 0.04 mol/dm3. |
| 7 | 0.0120 g of pesticide is dissolved in 1.50 kg of water. Find the concentration in parts per million by mass. | Mass of water = 1.50 kg = 1500 g; ppm = 0.0120 / 1500 x 10^6 = 8 ppm. |
| 8 | A solution has a concentration of 0.150 mol/dm3. A 20.0 cm3 sample is taken and the molar mass of the solute is 40.0 g/mol. Find the moles and the mass of solute in the sample. | Moles = 0.150 x 0.0200 = 0.003 mol; mass = 0.003 x 40.0 = 0.12 g. |
Section C: Acids, Bases and Titration (16 marks)
Assume 25 °C and Kw = 1.0 x 10^-14; give pH to two decimal places.
| # | Question | Answer and marking notes |
|---|---|---|
| 9 | Find the hydrogen ion concentration and the pH of 0.010 mol/dm3 hydrochloric acid. | Hydrochloric acid is a strong acid and ionises completely, so [H+] = 0.010 mol/dm3; pH = -log(0.010) = 2. |
| 10 | Find the pOH and pH of a 0.0050 mol/dm3 sodium hydroxide solution. | [OH-] = 0.0050 mol/dm3; pOH = -log(0.0050) = 2.3; pH = 14 – 2.3 = 11.7. |
| 11 | 20.0 cm3 of 0.100 mol/dm3 hydrochloric acid exactly neutralises 25.0 cm3 of sodium hydroxide solution of unknown concentration. Find that concentration. | Moles of acid = 0.100 x 0.0200 = 0.002 mol; reaction is 1:1, so moles of base are equal; concentration = 0.002 / 0.0250 = 0.08 mol/dm3. |
| 12 | A weak monobasic acid HA has concentration 0.100 mol/dm3 and pH 3.00. Find [H+], the degree of ionisation and Ka. | [H+] = 10^-3 = 0.001 mol/dm3; degree of ionisation = 0.001 / 0.100 = 0.01 (1%); Ka = (0.001)^2 / 0.100 = 1e-05. |
Section D: Redox and Electron Transfer (16 marks)
Show oxidation numbers or half-equations to justify the electron counts.
| # | Question | Answer and marking notes |
|---|---|---|
| 13 | Find the oxidation number of the stated element: Mn in KMnO4, Cr in K2Cr2O7, S in H2SO4. | KMnO4: (+1) + x + 4(-2) = 0, so x = +7; K2Cr2O7: 2(+1) + 2x + 7(-2) = 0, so x = +6; H2SO4: 2(+1) + x + 4(-2) = 0, so x = +6. |
| 14 | The half-equation of permanganate in acid is MnO4- + 8H+ + 5e- → Mn2+ + 4H2O. Find the moles of electrons accepted by 0.0200 mol of MnO4-. | Each mole of MnO4- accepts 5 mol of electrons; electrons = 0.0200 x 5 = 0.1 mol. |
| 15 | How many moles of Fe2+ can be oxidised by 25.0 cm3 of 0.0200 mol/dm3 potassium permanganate (Fe2+ → Fe3+ + e-)? | Moles of MnO4- = 0.0200 x 0.0250 = 0.0005 mol; electrons = 0.0005 x 5 = 0 mol; each Fe2+ releases 1 mol of electrons, so Fe2+ = 0 mol. |
| 16 | How many moles of potassium permanganate are needed to oxidise 0.0500 mol of Fe2+ completely? | Electrons released by Fe2+ = 0.0500 mol; moles of MnO4- = 0.0500 / 5 = 0.01 mol. |
Section E: Reaction Rate and Half-life (18 marks)
For a first-order reaction t1/2 = ln2 / k. A catalyst lowers the activation energy, and k2/k1 = exp((Ea1 – Ea2) / RT) with R = 8.314 J/(mol K).
| # | Question | Answer and marking notes |
|---|---|---|
| 17 | The concentration of a reactant falls from 0.80 mol/dm3 to 0.20 mol/dm3 in 30.0 s. Find the average rate of reaction. | Change in concentration = 0.80 – 0.20 = 0.60 mol/dm3; average rate = 0.60 / 30.0 = 0.02 mol/(dm3 s). |
| 18 | An experiment shows that doubling the concentration of A, with all else unchanged, increases the initial rate four times. Find the order of reaction with respect to A and explain. | If rate = k[A]^n then 2^n = 4, so n = 2: the reaction is second order in A and the rate is proportional to [A]^2. |
| 19 | A first-order reaction has rate constant k = 0.0231 s-1. Find its half-life to three significant figures. | t1/2 = ln2 / k = 0.6931 / 0.0231 = 30 s. |
| 20 | At 300 K a reaction has an activation energy of 80.0 kJ/mol. With a catalyst the activation energy falls to 60.0 kJ/mol. Assuming the pre-exponential factor is unchanged, find the factor by which the rate constant increases. | dEa = 20.0 kJ/mol = 20000 J/mol; k2/k1 = exp(20000 / (8.314 x 300)) = exp(8.02) which is about 3.04e+03, i.e. roughly 3.0 x 10^3 times faster. |
Section F: Thermochemistry and Enthalpy (18 marks)
Take the specific heat capacity of water as 4.18 J/(g K) and the density of solutions as 1.00 g/cm3; show heat released with a negative sign.
| # | Question | Answer and marking notes |
|---|---|---|
| 21 | 100 g of water rises in temperature by 6.50 K. Find the heat absorbed in kJ. | q = mc(dT) = 100 x 4.18 x 6.50 = 2717 J = 2.72 kJ. |
| 22 | 50.0 cm3 of 1.00 mol/dm3 hydrochloric acid is mixed with 50.0 cm3 of 1.00 mol/dm3 sodium hydroxide and the temperature rises by 6.70 K. Find the enthalpy change of neutralisation in kJ/mol. | Mass of solution is about 100 g; q = 100 x 4.18 x 6.70 = 2801 J; moles of water formed = 1.00 x 0.0500 = 0.0500 mol; dH = -2801 / 0.0500 = -56 kJ/mol. |
| 23 | Given standard enthalpies of formation: CO2(g) -394, H2O(l) -286 and CH4(g) -75 kJ/mol, find the standard enthalpy of combustion of methane (CH4 + 2O2 → CO2 + 2H2O). | dH = (-394) + 2(-286) – (-75) = -394 – 572 + 75 = -891 kJ/mol. |
| 24 | Given bond enthalpies: H-H 436, Cl-Cl 243 and H-Cl 432 kJ/mol, find the enthalpy change of H2 + Cl2 → 2HCl. | Bonds broken = 436 + 243 = 679 kJ/mol; bonds formed = 2 x 432 = 864 kJ/mol; dH = 679 – 864 = -185 kJ/mol. |
Find a tutor — freeTutor Registration →
A TutorZone practice paper; original questions and passages, not publisher material.



