/en-s4-physics-heat-temperature-heat-capacity-latent-heat-conduction-convection-radiation-gas-laws-boyle-charles-pressure-energy-experiment-practice-paper/
/en-s4-physics-heat-temperature-heat-capacity-latent-heat-conduction-convection-radiation-gas-laws-boyle-charles-pressure-energy-experiment-practice-paper/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S4 Physics Practice Paper: Temperature and Heat Capacity, Latent Heat and Change of State, Conduction Convection and Radiation, Gas Laws, Heat and Work, Heat Experiments and Errors (100 marks)

S4 Physics Practice Paper: Temperature and Heat Capacity, Latent Heat and Change of State, Conduction Convection and Radiation, Gas Laws, Heat and Work, Heat Experiments and Errors (100 marks)

  • 2026-11-21

Physics · S4

S4 Physics practice paper: 24 questions, 100 marks, 60 minutes on heat capacity, latent heat, conduction, convection, radiation, gas laws and experiments, with answers.

Paper details S4 Physics practice paper with worked answers: 24 questions on heat capacity, latent heat, heat transfer, gas laws, heat and work, and experiment errors.

Section A: Temperature and Heat Capacity (17 marks)

Each question is worth 4-5 marks; show working and units.

# Question Answer and marking notes
1 0.50 kg of water is heated from 20 C to 40 C. Given c = 4200 J/(kg K), find the energy needed. E = mc(dT) = 0.50 x 4200 x 20 = 42 000 J = 42 kJ.
2 2.0 kg of a liquid absorbs 168 kJ and its temperature rises by 20 K. Find its specific heat capacity. c = E / (m dT) = 168 000 / (2.0 x 20) = 4200 J/(kg K).
3 0.20 kg of water at 80 C is mixed with 0.30 kg at 20 C, with no heat loss. Find the final temperature. Heat lost = heat gained: 0.20(80 – T) = 0.30(T – 20); T = (0.20×80 + 0.30×20) / 0.50 = 44 C.
4 A 2000 W heater warms 1.5 kg of water from 20 C to 100 C. Find the ideal time and the actual time at 70% efficiency. E = 1.5 x 4200 x 80 = 504 000 J; ideal t = 504 000 / 2000 = 252 s; at 70% t = 504 000 / 1400 = 360 s.

Section B: Latent Heat and Change of State (17 marks)

Each question is worth 4-5 marks; note that temperature is constant during a change of state.

# Question Answer and marking notes
5 0.25 kg of ice at 0 C melts completely. Given the specific latent heat of fusion is 334 kJ/kg, find the energy needed. E = mL = 0.25 x 334 = 83.5 kJ. Temperature stays constant; the energy breaks the ice lattice.
6 0.10 kg of steam at 100 C condenses to water at 100 C. How much energy is released? (specific latent heat 2260 kJ/kg) E = mL = 0.10 x 2260 = 226 kJ.
7 0.50 kg of ice at -10 C is warmed to water at 20 C. Given ice c = 2100 J/(kg K), Lf = 334 kJ/kg and water c = 4200 J/(kg K), find the total energy. Ice warms: 0.50 x 2100 x 10 = 10.5 kJ; melt: 167 kJ; water warms: 42 kJ; total 219.5 kJ.
8 1.0 g of water evaporating from skin absorbs 2260 J. If all of it heated 100 g of water, what temperature rise results? (c = 4200 J/(kg K)) dT = E / (mc) = 2260 / (0.100 x 4200) = 5.38 K, which is why sweating cools the body well.

Section C: Conduction, Convection and Radiation (17 marks)

Each question is worth 4-5 marks; name the heat transfer mechanism.

# Question Answer and marking notes
9 A copper rod 0.50 m long with cross-section 2.0 cm2 has ends 100 K apart. Given k = 400 W/(m K), find the rate of heat conduction. P = kA(dT) / L = 400 x 2.0e-4 x 100 / 0.50 = 16 W.
10 A rod conducts 40 W at a fixed temperature difference. If it is replaced by one of double the length, same material and area, what is the new rate? P is proportional to 1/L, so doubling the length halves the rate: 40 / 2 = 20 W.
11 An object rises from 300 K to 600 K. If its surface is unchanged, by what factor does the radiated power change? Radiated power is proportional to T^4, so doubling T gives 2^4 = 16 times.
12 A vacuum flask eliminates conduction and convection. Radiation is 30% of the heat loss and silvering cuts it to 3%. Find the percentage reduction and explain the vacuum. Reduction = (30 – 3) / 30 x 100% = 90%. A vacuum has no particles to conduct and cannot support convection currents, so both modes are blocked.

Section D: Gas Laws (17 marks)

Each question is worth 4-5 marks; use absolute temperature.

# Question Answer and marking notes
13 2.0 L of gas at 300 K and 1.0 atm is heated to 400 K at constant pressure. Find the new volume. V1/T1 = V2/T2, so V2 = 2.0 x 400 / 300 = 2.667 L.
14 Gas sealed in a rigid container is at 100 kPa and 300 K. It is heated to 350 K. Find the new pressure. P1/T1 = P2/T2, so P2 = 100 x 350 / 300 = 116.7 kPa.
15 3.0 L of gas at 1.0 atm is compressed isothermally to 1.5 L. Find the new pressure. P1V1 = P2V2, so P2 = 1.0 x 3.0 / 1.5 = 2.0 atm.
16 24 dm3 of gas is at 300 K and 100 kPa. Use pV = nRT with R = 8.31 J/(mol K) to find the number of moles. V = 0.024 m3; n = pV / RT = (100 000 x 0.024) / (8.31 x 300) = 2400 / 2493 = 0.963 mol.

Section E: Heat, Work and Efficiency (16 marks)

Each question is worth 4 marks; show the calculation steps.

# Question Answer and marking notes
17 Water falls 50 m; 10% of the lost potential energy becomes heat. Find the temperature rise (g = 9.81 m/s2, c = 4200 J/(kg K)). Potential energy per kg = 9.81 x 50 = 490.5 J; 10% = 49.05 J; dT = 49.05 / 4200 = 0.0117 K.
18 A 2.0 kg metal block sliding at 5 m/s stops, all kinetic energy becoming heat (c = 500 J/(kg K)). Find the temperature rise. KE = 0.5 x 2.0 x 5^2 = 25 J; dT = 25 / (2.0 x 500) = 0.025 K.
19 A 1000 W heater runs for 10 minutes. Find the energy supplied in kJ. E = Pt = 1000 x 600 = 600 000 J = 600 kJ.
20 Burning 0.10 kg of fuel (45 MJ/kg) heats 5.0 kg of water from 20 C to 60 C. Find the efficiency. Useful = 5.0 x 4200 x 40 = 840 kJ; input = 4.5 MJ; efficiency = 840 / 4500 x 100% = 18.7%.

Section F: Heat Experiments and Errors (16 marks)

Each question is worth 4 marks; state the source of error.

# Question Answer and marking notes
21 A thermometer reads to within +/-0.5 K and a rise of 20 K is measured. Find the maximum percentage error in the rise. Two readings each off by 0.5 K give 1.0 K; percentage error = 1.0 / 20 x 100% = 5%.
22 The same experiment needs 200 s with good insulation and 240 s with poor insulation. Find the extra energy percentage lost. Extra = (240 – 200) / 200 x 100% = 20% more energy is needed to replace the loss.
23 Three results for specific heat capacity are 4180, 4220 and 4500 J/(kg K). Identify the outlier and find the mean of the rest. 4500 is an outlier; the mean of the rest is (4180 + 4220) / 2 = 4200 J/(kg K), which matches the accepted value.
24 An appliance uses 2.5 kWh. Using 1 kWh = 3.6 MJ, find the energy in MJ. E = 2.5 x 3.6 = 9.0 MJ.

Find a tutor — freeTutor Registration →

A TutorZone practice paper; original questions and passages, not publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →