S4 Physics Practice Paper: Uniformly Accelerated Motion and v-t Graphs, Newton’s Laws and Friction, Work and Power, Conservation of Momentum and Collisions, Pressure and Upthrust, Specific Heat Capacity and Heating
- 2026-11-22
Physics · S4
S4 Physics practice paper with worked answers on kinematics, Newton’s laws and friction, work and power, momentum and collisions, pressure and upthrust, and heat capacity.
Download Question paper PDF | Answer key PDF
Paper details S4 Physics practice paper with full worked answers on kinematics and v-t graphs, forces and friction, work, power, momentum, pressure, upthrust and heat capacity.
Question 1 Uniformly Accelerated Motion and v-t Graphs
Answer all parts. Show the formula and the steps of calculation.
| # | Question | Answer and marking notes |
|---|---|---|
| 1 | A car starts from rest and accelerates uniformly at 2.0 m/s² for 8.0 s. Find its final velocity. | v = u + at = 0 + 2.0 × 8.0 = 16 m/s |
| 2 | Find the distance travelled during the acceleration stage. | s = ½at² = 0.5 × 2.0 × 8.0² = 64 m |
| 3 | The car then travels at a constant 16 m/s for 10 s and finally decelerates uniformly to rest in 4 s. Find the distance travelled during the deceleration stage. | Mean speed = (16 + 0)/2 = 8 m/s; s = 8 × 4 = 32 m |
| 4 | Find the total distance and the average speed for the whole journey. | Total distance = 64 + 160 + 32 = 256 m; total time = 22 s; average speed = 256 ÷ 22 = 11.6 m/s |
Question 2 Newton’s Laws and Friction
Take g = 9.8 m/s².
| # | Question | Answer and marking notes |
|---|---|---|
| 5 | A block of mass 5.0 kg rests on a horizontal table. Find its weight and the normal force from the table. | W = mg = 5.0 × 9.8 = 49 N; normal force N = 49 N |
| 6 | The coefficient of kinetic friction between the block and the table is 0.35. Find the friction acting on the sliding block. | f = μN = 0.35 × 49 = 17.15 ≈ 17.1 N |
| 7 | A horizontal force of 30 N is now applied to push the block. Find its acceleration. | Net force = 30 − 17.15 = 12.85 N; a = F/m = 12.85 ÷ 5.0 = 2.57 m/s² |
| 8 | Starting from rest, the block is pushed for 3.0 s. Find its velocity and displacement. | v = at = 2.57 × 3.0 = 7.7 m/s; s = ½at² = 0.5 × 2.57 × 3.0² = 11.6 m |
Question 3 Work, Energy and Power
Take g = 9.8 m/s².
| # | Question | Answer and marking notes |
|---|---|---|
| 9 | A student of mass 60 kg climbs 5.0 m up a staircase in 12 s. Find the work done against gravity. | W = mgh = 60 × 9.8 × 5.0 = 2940 J |
| 10 | Find the average power of the student against gravity. | P = W/t = 2940 ÷ 12 = 245 W |
| 11 | A lift of mass 1,500 kg rises 20 m at constant speed in 8.0 s. Find its output power. | W = mgh = 1,500 × 9.8 × 20 = 294000 J; P = 294000 ÷ 8.0 = 36750 W |
| 12 | If the efficiency of the lift system is 70%, find its input power. | Efficiency = output ÷ input; input power = 36750 ÷ 0.70 = 52500 W |
Question 4 Conservation of Momentum and Collisions
All collisions take place on a horizontal frictionless track.
| # | Question | Answer and marking notes |
|---|---|---|
| 13 | A trolley of mass 2.0 kg moving at 3.0 m/s collides with a stationary trolley of mass 1.0 kg. Find the total momentum before the collision. | p = mu = 2.0 × 3.0 = 6.0 kg m/s |
| 14 | After the collision the two trolleys move together. Find their common velocity. | By conservation of momentum: 6.0 = (2.0 + 1.0)v; v = 6.0 ÷ 3.0 = 2.0 m/s |
| 15 | Find the total kinetic energy before and after the collision, and the kinetic energy lost. | Before = ½ × 2.0 × 3.0² = 9.0 J; after = ½ × 3.0 × 2.0² = 6.0 J; lost = 3.0 J |
| 16 | If the stationary trolley has a mass of 4.0 kg instead, find the common velocity and the kinetic energy lost. | v = 6.0 ÷ (2.0 + 4.0) = 1.0 m/s; after = ½ × 6.0 × 1.0² = 3.0 J; lost = 6.0 J |
Question 5 Pressure and Upthrust
The density of water is 1,000 kg/m³. Take g = 9.8 m/s².
| # | Question | Answer and marking notes |
|---|---|---|
| 17 | A cubical wooden block of side 0.20 m has a density of 600 kg/m³. Find its volume, mass and weight. | V = 0.20³ = 0.0080 m³; m = 600 × 0.0080 = 4.8 kg; W = 4.8 × 9.8 = 47.04 N |
| 18 | The block floats in equilibrium on water. Find the upthrust and the volume of water displaced. | Upthrust = weight = 47.04 N; V = upthrust ÷ (ρg) = 47.04 ÷ (1,000 × 9.8) = 0.0048 m³ |
| 19 | Find the depth of the block that is submerged. | Base area = 0.20² = 0.04 m²; depth = 0.0048 ÷ 0.04 = 0.12 m |
| 20 | What mass must be placed on the block so that it is just completely submerged? | Extra water to be displaced = 0.0080 − 0.0048 = 0.0032 m³; mass = 1,000 × 0.0032 = 3.2 kg |
Question 6 Specific Heat Capacity and Heating Calculations
The specific heat capacity of water is 4,200 J kg⁻¹ K⁻¹.
| # | Question | Answer and marking notes |
|---|---|---|
| 21 | An electric heater of power 1,500 W heats 2.0 kg of water for 300 s. Find the energy supplied. | E = Pt = 1,500 × 300 = 450000 J |
| 22 | Neglecting heat loss, find the rise in temperature of the water. | ΔT = E ÷ (mc) = 450000 ÷ (2.0 × 4,200) = 53.6 °C |
| 23 | If 20% of the energy is actually lost to the surroundings, find the rise in temperature. | Useful energy = 450000 × 0.80 = 360000 J; ΔT = 360000 ÷ 8,400 = 42.9 °C |
| 24 | If the heater efficiency is 70%, how long does it take to raise the temperature of 2.0 kg of water by 30 °C? | Q = mcΔT = 2.0 × 4,200 × 30 = 252000 J; input = 252000 ÷ 0.70 = 360000 J; t = 360000 ÷ 1,500 = 240 s |
Find a tutor — freeTutor Registration →
A TutorZone practice paper; original questions and passages, not publisher material.



