S5 Chemistry Practice Paper (Set 3) | Isomerism, functional group tests, esterification yield, saponification value, polymerisation, combustion analysis
- 2026-11-17
Senior Secondary Chemistry
S5 Chemistry practice paper with answers: isomers of alkanes and alkenes, functional group tests, esterification percentage yield, saponification value.
Download Question paper PDF | Answer key PDF
Paper details S5 Chemistry practice paper with answers: isomers of alkanes and alkenes, functional group tests, percentage yield of an ester, saponification value, degree of polymerisation, combustion analysis.
Section A: Structural isomers
Question 1 (16 marks)
| # | Question | Answer and marking notes |
|---|---|---|
| 1 | Give the names of all the structural isomers of C4H10 and state how many there are. | C4H10 has 2 structural isomers: butane (straight chain) and 2-methylpropane (branched). |
| 2 | Give the names of all the structural isomers of C5H12 and state how many there are. | C5H12 has 3: pentane, 2-methylbutane and 2,2-dimethylpropane. |
| 3 | How many chain compounds with molecular formula C4H8 contain one C=C bond, counting cis-trans isomers? Name each one. | There are 4: but-1-ene, cis-but-2-ene, trans-but-2-ene and 2-methylprop-1-ene. |
| 4 | Explain why 2-methylprop-1-ene does not show cis-trans isomerism. | Cis-trans isomerism requires each carbon of the C=C bond to carry two different groups. The terminal carbon (C1) of 2-methylprop-1-ene carries two identical hydrogen atoms, so the requirement fails. |
Section B: Identifying functional groups
Question 2 (16 marks)
| # | Question | Answer and marking notes |
|---|---|---|
| 5 | Bromine water is decolourised rapidly when compound A is added. State the functional group in A. | A carbon-carbon double bond (C=C, an alkene); addition across the double bond decolourises bromine water. |
| 6 | Bubbles are seen when compound B is added to sodium hydrogencarbonate solution. State the functional group in B and the formula of the gas released. | A carboxyl group (-COOH); carbon dioxide (CO2) is released: R-COOH + NaHCO3 -> R-COONa + H2O + CO2. |
| 7 | Compound C gives an orange-red precipitate with 2,4-dinitrophenylhydrazine. State the functional group in C and describe how an aldehyde can be distinguished from a ketone. | A carbonyl group (C=O, aldehyde or ketone). Warm with Tollens reagent: an aldehyde gives a silver mirror while a ketone does not; Fehling solution gives a brick-red precipitate only with an aldehyde. |
| 8 | Compound D, warmed with ethanol and a little concentrated sulphuric acid, gives a liquid with a fruity smell. Name the reaction and state the functional groups required in the reactants. | Esterification; D must contain a carboxyl group (-COOH) and ethanol supplies the hydroxyl group (-OH). Concentrated sulphuric acid acts as a catalyst and removes the water formed. |
Section C: Esterification and percentage yield
Question 3 (16 marks)
| # | Question | Answer and marking notes |
|---|---|---|
| 9 | Calculate the number of moles in 12.0 g of ethanoic acid. (Relative atomic masses: C = 12.0, H = 1.0, O = 16.0) | Molar mass of CH3COOH = 60.0 g mol-1; moles = 12.0 / 60.0 = 0.200 mol. |
| 10 | If the ethanoic acid were completely esterified, what mass of ethyl ethanoate would be formed? | The ratio is 1:1, so 0.200 mol of ethyl ethanoate forms; with molar mass 88.0 g mol-1 the mass is 0.200 x 88.0 = 17.6 g. |
| 11 | The experiment actually gives 13.2 g of ethyl ethanoate. Calculate the percentage yield. | Percentage yield = 13.2 / 17.6 x 100 = 75.0 percent. |
| 12 | Suggest two ways to increase the yield of the ester and explain each briefly. | First, use excess ethanol so the equilibrium shifts to the products. Second, distil off the ester or the water formed so the equilibrium keeps shifting to the right (esterification is reversible). |
Section D: Saponification value and fats
Question 4 (16 marks)
| # | Question | Answer and marking notes |
|---|---|---|
| 13 | 2.00 g of a fat is completely saponified by 24.0 cm3 of 0.500 mol dm-3 potassium hydroxide solution. Calculate the number of moles of KOH used. | Moles = 0.500 x 24.0 / 1000 = 0.0120 mol. |
| 14 | Calculate the saponification value of the fat in mg of KOH per gram. (K = 39.1, O = 16.0, H = 1.0) | Molar mass of KOH = 56.1 g mol-1, so mass = 0.0120 x 56.1 = 0.6732 g; saponification value = 0.6732 / 2.00 x 1000 = 337 mg KOH g-1. |
| 15 | The fat is a triglyceride and needs three KOH units per molecule for saponification. Estimate its average molar mass. | Moles of fat = 0.0120 / 3 = 0.0040 mol; average molar mass = 2.00 / 0.0040 = 500 g mol-1. |
| 16 | Explain how soap removes greasy dirt from cloth. | A soap molecule has a long hydrocarbon tail (oil-soluble) and a carboxylate head (water-soluble). The tails dissolve in the grease while the heads face the water, emulsifying the grease into tiny droplets that are carried away by the water. |
Section E: Addition and condensation polymerisation
Question 5 (16 marks)
| # | Question | Answer and marking notes |
|---|---|---|
| 17 | Write the addition polymerisation of prop-1-ene (propene) and draw the repeat unit of the polymer. | n CH2=CH-CH3 -> [-CH2-CH(CH3)-]n, poly(propene); the repeat unit is -CH2-CH(CH3)-. |
| 18 | A sample of poly(propene) has a relative molecular mass of 1.26 x 10^5 and the repeat unit has molar mass 42.0 g mol-1. Calculate the degree of polymerisation. | Degree of polymerisation = 1.26 x 10^5 / 42.0 = 3000. |
| 19 | How does the polymerisation of poly(propene) differ from that of nylon-6,6? | Poly(propene) forms by addition polymerisation of a monomer containing C=C with no small molecule lost; nylon-6,6 forms by condensation polymerisation of hexane-1,6-diamine with hexanedioic acid, losing one water molecule per amide link formed. |
| 20 | Write the structure of the amide linkage in nylon-6,6 and name the other product of the condensation. | The amide linkage is -CO-NH-, formed from -COOH and -NH2 with loss of water; the other product is water (H2O). |
Section F: Combustion analysis and molecular formula
Question 6 (20 marks)
| # | Question | Answer and marking notes |
|---|---|---|
| 21 | 0.580 g of an organic compound containing C, H and O is burnt completely to give 1.320 g of CO2 and 0.540 g of H2O. Calculate the moles of carbon and of hydrogen in the sample. | n(C) = 1.320 / 44.0 = 0.0300 mol; n(H) = 2 x 0.540 / 18.0 = 0.0600 mol. |
| 22 | Calculate the moles of oxygen and hence deduce the empirical formula. | m(C) = 0.360 g and m(H) = 0.060 g, so m(O) = 0.580 – 0.360 – 0.060 = 0.160 g and n(O) = 0.160 / 16.0 = 0.0100 mol. C:H:O = 3:6:1, so the empirical formula is C3H6O. |
| 23 | Mass spectrometry gives a relative molecular mass of 58. Deduce the molecular formula. | The empirical formula C3H6O has mass 3 x 12 + 6 x 1 + 16 = 58 g mol-1, equal to the relative molecular mass, so the molecular formula is C3H6O. |
| 24 | C3H6O has two isomers, propanal and propan-2-one (propanone). Describe one chemical test that distinguishes them and give the observations. | Both give an orange-red precipitate with 2,4-dinitrophenylhydrazine, so warm with Tollens reagent (or Fehling solution): propanal gives a silver mirror (a brick-red precipitate with Fehling), while propanone gives no reaction. |
Find a tutor — freeTutor Registration →
A TutorZone practice paper; original questions and passages, not publisher material.



