S5 Combined Science Practice Paper (Set 2): Newtonian Motion, Work and Power; Series Circuits and Electrical Power; Mole Calculations and Molar Volume; Acid-base Titration and pH; Monohybrid Crosses and Genetic Ratios; Energy Flow and Mark-recapture Estimation
- 2026-11-15
S5 Combined Science Set 2: 24 parts, 100 marks, 60 min on force, power, series circuits, moles, titration, pH, genetics and energy flow, with full answers.
Question 1: Newtonian Motion, Work and Power
A car of mass 800 kg accelerates from rest to 20 m/s in 8 s. Ignore resistance.
| # | Question | Answer and marking notes |
|---|---|---|
| 1 | Calculate the average acceleration of the car (2 decimal places, with unit). | a = (v – u) / t = (20 – 0) / 8 = 2.5 m/s^2. |
| 2 | Using F = ma, calculate the net force on the car (1 decimal place). | F = m x a = 800 x 2.5 = 2000.0 N (in the direction of motion). |
| 3 | Calculate the distance travelled in 8 s (use s = ut + 1/2 a t^2). | s = 0 + 0.5 x 2.5 x 8^2 = 80.0 m. Check: mean speed (0 + 20)/2 x 8 = 80.0 m. |
| 4 | Calculate the work done by the net force and the average power in kW. | W = F x s = 2000.0 x 80.0 = 160000.0 J; P = W / t = 160000.0 / 8 = 20000.0 W = 20.0 kW. |
Question 2: Series Circuits and Electrical Power
A 12 V battery (negligible internal resistance) is connected to R1 = 4 ohm and R2 = 6 ohm in series.
| # | Question | Answer and marking notes |
|---|---|---|
| 5 | Calculate the total series resistance and the current through each resistor (2 decimal places). | R = 4.0 + 6.0 = 10.0 ohm; in series the current is the same, I = V / R = 12 / 10.0 = 1.2 A. |
| 6 | Calculate the voltage across R1 and hence across R2 (2 decimal places). | V1 = I x R1 = 1.2 x 4.0 = 4.8 V; V2 = 12 – 4.8 = 7.2 V (check: 1.2 x 6.0). |
| 7 | Calculate the total power delivered by the battery and the power dissipated in R2 (2 decimal places). | P_total = V x I = 12 x 1.2 = 14.4 W; P2 = I^2 x R2 = 1.2^2 x 6.0 = 8.64 W. |
| 8 | If R2 burns out (open circuit), state how the current in R1 and the total power change, and explain why. | A series circuit has one path only, so breaking it anywhere makes the current zero: R1 current falls from 1.2 A to 0 A and total power falls from 14.4 W to 0 W. No current, so no voltage drop across R1. |
Question 3: Mole Calculations and Molar Volume
10.0 g of calcium carbonate (CaCO3, molar mass 100 g/mol) reacts with excess dilute hydrochloric acid: CaCO3 + 2HCl -> CaCl2 + CO2 + H2O. Take the molar volume as 24.0 dm^3/mol at room conditions.
| # | Question | Answer and marking notes |
|---|---|---|
| 9 | Calculate the number of moles in 10.0 g of calcium carbonate. | n = m / M = 10.0 / 100.0 = 0.1 mol. |
| 10 | From the mole ratio in the equation, find the moles of carbon dioxide produced. | CaCO3 : CO2 = 1 : 1, so n(CO2) = 0.1 mol. The acid is in excess, so CaCO3 is limiting. |
| 11 | Calculate the mass of carbon dioxide produced (2 decimal places). | m = n x M = 0.1 x 44.0 = 4.4 g. |
| 12 | Calculate the volume of that carbon dioxide at room temperature and standard pressure in dm^3 (3 decimal places). | V = n x molar volume = 0.1 x 24.0 = 2.4 dm^3 (= 2400 cm^3). |
Question 4: Acid-base Titration and pH
25.0 cm^3 of dilute hydrochloric acid is titrated with 0.100 mol/dm^3 sodium hydroxide; 20.0 cm^3 of the alkali is used to reach the end point. NaOH + HCl -> NaCl + H2O.
| # | Question | Answer and marking notes |
|---|---|---|
| 13 | Calculate the moles of sodium hydroxide used (3 significant figures). | n(NaOH) = c x V = 0.1 x 0.025 = 0.0025 mol. |
| 14 | State the moles of hydrochloric acid and the mole ratio used. | NaOH : HCl = 1 : 1, so n(HCl) = 0.0025 mol. |
| 15 | Calculate the concentration of the acid in mol/dm^3 (3 decimal places). | c(HCl) = n / V = 0.0025 / 0.02 = 0.125 mol/dm^3. |
| 16 | What is the pH of separate 0.010 mol/dm^3 hydrochloric acid? What is the pH after a 10-fold dilution, and why? | A strong acid ionises completely: [H+] = 0.01 mol/dm^3, pH = -log(0.01) = 2.0. After a 10-fold dilution [H+] = 0.001 mol/dm^3, so pH = 3.0, a rise of one pH unit. |
Question 5: Monohybrid Crosses and Genetic Ratios
In peas the tall allele T is dominant to the dwarf allele t. Two heterozygous tall plants (Tt) are crossed, producing 240 offspring.
| # | Question | Answer and marking notes |
|---|---|---|
| 17 | State the gametes of the parents and the genotype ratio of the offspring. | Each parent gives T and t gametes (1/2 each). A Punnett square gives TT : Tt : tt = 1 : 2 : 1. |
| 18 | Calculate the expected numbers of tall and dwarf offspring out of 240. | Tall (TT or Tt) = 3/4: 240 x 3/4 = 180; dwarf (tt) = 1/4: 240 x 1/4 = 60. |
| 19 | If two plants are picked at random, what is the probability that both are dwarf (decimal and percentage)? | P(dwarf) = 1/4 = 0.25; independent events give 0.25 x 0.25 = 0.0625, i.e. 6.25% (about 1/16). |
| 20 | To determine the genotype of a tall pea plant, what cross should be done? Give the expected ratios for both possible genotypes and explain. | Cross it with a dwarf plant (tt) — a test cross. If the parent is TT all offspring are tall (Tt); if it is Tt the offspring are tall : dwarf = 1 : 1 (about 50 : 50 out of 100). A test cross reveals the recessive allele, so the genotype can be distinguished. |
Question 6: Energy Flow and Mark-recapture
Producers in a grassland fix 50 000 kJ of energy; the transfer efficiency is about 10%. In a pond study 40 snails are marked and released; a week later 50 are caught and 8 are marked.
| # | Question | Answer and marking notes |
|---|---|---|
| 21 | Calculate the energy available to the primary, secondary and tertiary consumers (in kJ). | Primary: 50 000 x 0.10 = 5000 kJ; secondary: 5000 x 0.10 = 500 kJ; tertiary: 500 x 0.10 = 50 kJ. |
| 22 | What percentage of energy at each trophic level is not passed on, and where does it go? | About 90% is not passed on: mostly lost as heat from respiration, plus excretion and undigested material, and uneaten remains that go to decomposers. |
| 23 | Estimate the total number of snails using the Lincoln index (N = M x n / m), and give two reasons the estimate may be too low. | N = M x n / m = 40 x 50 / 8 = 250. |
| 24 | Give two assumptions of this method, and state whether the estimate would be too high or too low if marking made snails more likely to be eaten. | Assumptions: (1) marks mix evenly and do not rub off; (2) marked and unmarked animals are equally catchable and the population is closed (no migration, birth or death). If marking makes snails more likely to be eaten, the recaptured marked count m is too small, so N = M x n / m is divided by a smaller number and the estimate is too high. |
Find a tutor — freeTutor Registration →
A TutorZone practice paper; original questions and passages, not publisher material.



