S5 Geography Practice Paper (Set 1): Map Reading and Scale, Population Density and Natural Increase, River Discharge and Runoff Coefficient, Urban Land Use and Density, Farming Systems and Profit, Industrial Location and Environmental Impact
- 2026-11-15
S5 Geography paper, Set 1: 24 parts, 100 marks on map scale, population, river discharge, urban land use, farm profit and industry, with worked answers.
Map Reading and Scale
On a map with a scale of 1:25,000, points A and B are 8.4 cm apart and the mapped area covers 15.0 cm². The contour interval is 20 m.
| # | Question | Answer and marking notes |
|---|---|---|
| 1 | Calculate the actual ground distance between A and B in km. | 8.4 cm x 25000 = 210000 cm, which is 2.1 km. |
| 2 | Calculate the ground area covered by the map in km² (4 decimal places). | 15.0 cm² x (25000)² = 9,375,000,000 cm²; since 1 km² = 1 x 10¹⁰ cm², the area is 0.9375 km². |
| 3 | A slope crosses 6 contours and its horizontal distance on the map is 3.0 cm. Find the gradient as a percentage and as 1 in n. | Vertical drop = 6 x 20 = 120 m; horizontal distance = 3.0 cm x 25000 = 750 m; gradient = 120 ÷ 750 = 16%, i.e. 1 in 6.25. |
| 4 | A footpath measures 12.5 cm on the map. How many minutes does it take to walk it at 4.5 km/h (1 decimal place)? | 12.5 cm x 25000 = 312500 cm = 3.125 km; 3.125 ÷ 4.5 = 0.694 hours = 41.7 minutes. |
Population Density and Natural Increase
A district has 486,000 people over 42 km². In a year there are 4,860 births, 3,240 deaths and a net migration gain of 1,500. Age structure: 72,900 aged 0–14, 330,480 aged 15–64 and 82,620 aged 65 or above.
| # | Question | Answer and marking notes |
|---|---|---|
| 5 | Calculate the population density in persons per km² (1 decimal place). | 486,000 ÷ 42 = 11,571.4286 persons per km², i.e. 11,571.4 to one decimal place. |
| 6 | Calculate the rate of natural increase per 1,000 people (2 decimal places). | Natural increase = 4,860 − 3,240 = 1,620; 1,620 ÷ 486,000 x 1,000 = 3.33 per 1,000. |
| 7 | Calculate the dependency ratio (dependent ÷ working population x 100%, 1 decimal place) and state what it indicates. | Dependents = 72,900 + 82,620 = 155,520; ( 155,520 ÷ 330,480 ) x 100% = 47.1%. The ratio is about 47%, meaning every 100 working people support about 47 dependents, a fairly heavy burden. |
| 8 | If the population then grows by 0.8% a year, what will it be after 10 years (nearest integer)? | 486,000 x (1 + 0.008)^10 = 486,000 x 1.08294, about 526,310 people. |
River Discharge and Runoff Coefficient
At a gauging station the channel is 8.0 m wide with a mean depth of 0.6 m and a mean velocity of 0.9 m/s. The same day the 0.32 km² catchment receives 210 mm of rain and the mean discharge is 0.42 m³/s.
| # | Question | Answer and marking notes |
|---|---|---|
| 9 | Calculate the cross-sectional area in m² and the discharge in m³/s (2 decimal places). | Area = 8.0 x 0.6 = 4.8 m²; discharge = 4.8 x 0.9 = 4.32 m³/s. |
| 10 | Calculate the total volume of rain falling on the catchment that day in m³. | 210 mm = 0.21 m; 0.32 km² = 320,000 m²; volume = 0.21 x 320,000 = 67,200 m³. |
| 11 | Calculate the runoff coefficient for the day as a percentage (nearest integer) and explain where the rest of the water went. | Daily discharge = 0.42 x 86,400 = 36,288 m³; runoff coefficient = 36,288 ÷ 67,200 x 100% = 54%. The other 46% is intercepted by plants, infiltrates the soil or evaporates. |
| 12 | During a flood the discharge rises to 8.64 m³/s and velocity to 1.2 m/s. Assuming the width is unchanged, find the water depth in m. | Area = 8.64 ÷ 1.2 = 7.2 m²; depth = 7.2 ÷ 8.0 = 0.9 m, about 50% more than the normal 0.6 m. |
Urban Land Use and Density
A new town covers 240 hectares with a population of 84,000. Land use: residential 96 ha, commercial 24 ha, industrial 36 ha, transport 36 ha and open space 48 ha.
| # | Question | Answer and marking notes |
|---|---|---|
| 13 | Calculate the percentage of the town area taken by each land use and check that the total is 100%. | Residential 96 ÷ 240 = 40%, commercial 10%, industrial 15%, transport 15%, open space 20%; total 100%. |
| 14 | Calculate the population density of the residential area in persons per hectare. | 84,000 ÷ 96 = 875 persons per hectare. |
| 15 | A residential site of 0.6 ha has a plot ratio of 8. If the average flat is 45 m², how many flats can be built (1 decimal place)? | Gross floor area = 0.6 x 10,000 x 8 = 48,000 m²; number of flats = 48,000 ÷ 45 = 1066.7. |
| 16 | Of 12,000 commuters, 65% travel by rail over a 2-hour peak; rail capacity is 9,000 passengers per hour. Find the rail load factor (%, 1 decimal place) and suggest one improvement. | Rail passengers = 12,000 x 0.65 = 7,800; per hour = 7,800 ÷ 2 = 3,900; load factor = 3,900 ÷ 9,000 x 100% = 43.3%, leaving 56.7% spare capacity. Options: more frequent trains or feeder bus routes. |
Farming Systems and Profit
A 4.5 ha rice farm yields 5.2 tonnes per hectare and sells rice at $9,200 per tonne. Costs are labour $68,000, seed $9,600, fertiliser $21,400 and machinery $18,000.
| # | Question | Answer and marking notes |
|---|---|---|
| 17 | Calculate the total annual production in tonnes. | 4.5 ha x 5.2 t/ha = 23.4 tonnes. |
| 18 | Calculate the total annual revenue in dollars. | 23.4 tonnes x $9,200 = $215,280. |
| 19 | Calculate total cost, profit and profit per hectare in dollars. | Cost = 68,000 + 9,600 + 21,400 + 18,000 = $117,000; profit = $215,280 − $117,000 = $98,280; per hectare = $98,280 ÷ 4.5 = $21,840. |
| 20 | If a flood cuts the yield by 15% while costs stay the same, calculate the new profit and explain how the farmer could reduce risk. | Output = 23.4 x 0.85 = 19.89 tonnes; revenue = 19.89 x $9,200 = $182,988; profit = $182,988 − $117,000 = $65,988. Risk can be spread by farm insurance, growing several crops and building drainage. |
Industrial Location and Environmental Impact
A factory uses 1,450 MWh of electricity a year and the grid emits 0.55 kg CO₂ per kWh. The plant is 42 km from its raw material source with 850 lorry trips a year; moving to an industrial estate cuts the distance to 12 km at $9.5 per km. It discharges 320 m³ of wastewater a day with BOD 180 mg/L, and treatment removes 85%. The site is 3.6 ha and 60% is built up.
| # | Question | Answer and marking notes |
|---|---|---|
| 21 | Calculate the annual carbon emissions in tonnes of CO₂ (1 decimal place). | 1,450 MWh = 1,450,000 kWh; 1,450,000 x 0.55 = 797,500 kg = 797.5 tonnes of CO₂. |
| 22 | Calculate the annual transport cost saved after moving to the industrial estate. | Each trip is 42 − 12 = 30 km shorter; saving = 850 x 30 x $9.5 = $242,250. |
| 23 | Calculate the BOD after treatment in mg/L and the daily BOD load in kg (2 decimal places). | After treatment = 180 x (1 − 0.85) = 27 mg/L; load = 320 m³ x 27 g/m³ = 8,640 g = 8.64 kg. |
| 24 | Calculate the built-up area in ha and the green area if 30%% of the remaining land becomes a green buffer (ha, 3 decimal places). | Built-up = 3.6 x 60% = 2.16 ha; remaining = 3.6 − 2.16 = 1.44 ha; green = 1.44 x 0.3 = 0.432 ha. |
Find a tutor — freeTutor Registration →
A TutorZone practice paper; original questions and passages, not publisher material.



