/en-s5-physics-mechanics-newton-laws-friction-momentum-impulse-collisions-circular-motion-banked-track-vertical-circle-work-energy-power-spring-pendulum-simple-harmonic-motion-data-analysis-practice-pa/
/en-s5-physics-mechanics-newton-laws-friction-momentum-impulse-collisions-circular-motion-banked-track-vertical-circle-work-energy-power-spring-pendulum-simple-harmonic-motion-data-analysis-practice-pa/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S5 Physics Practice Paper: Mechanics – Newton Laws, Conservation of Momentum, Circular Motion, Work and Energy, Simple Harmonic Motion (100 marks)

S5 Physics Practice Paper: Mechanics – Newton Laws, Conservation of Momentum, Circular Motion, Work and Energy, Simple Harmonic Motion (100 marks)

  • 2026-11-21

Physics · S5

S5 Physics mechanics paper: 24 questions, 100 marks, 75 minutes. Newton laws, momentum, circular motion, work and energy, SHM, with a full English answer key.

Paper details S5 Physics mechanics practice paper – Newton laws, momentum and collisions, circular motion, work energy and power, simple harmonic motion. 24 questions, 100 marks, 75 minutes, with full English answer key.

Section A: Newton Laws and Friction (16 marks)

Take g = 9.8 m/s2 throughout. Show the formula and the unit in every answer.

# Question Answer and marking notes
1 A body of mass 5 kg experiences a net force of 20 N. Find its acceleration. From F = ma, a = F / m = 20 / 5 = 4.0 m/s2, in the direction of the net force.
2 A 70 kg person stands on a scale inside a lift accelerating upward at 2.0 m/s2. Find the scale reading (normal reaction R). Taking upward as positive: R – mg = ma, so R = m(g + a) = 70 x (9.8 + 2.0) = 826 N. If the lift instead accelerates downward at 2.0 m/s2, R = 546 N.
3 A 4 kg block on a horizontal table is pushed by a horizontal force of 18 N; the kinetic friction coefficient is 0.30. Find the friction, the net force and the acceleration. Normal force N = mg = 39.2 N; friction f = 0.30 x 39.2 = 11.76 N; net force = 18 – 11.76 = 6.24 N; a = 6.24 / 4 = 1.56 m/s2.
4 A 3 kg block on a smooth horizontal table is connected by a light string over a pulley at the table edge to a hanging 2 kg mass. Find the acceleration of the system and the tension. Whole system: a = m2 g / (m1 + m2) = 2 x 9.8 / 5 = 3.92 m/s2. Tension T = m1 a = 3 x 3.92 = 11.76 N (checked by 2 g – 2a).

Section B: Momentum and Collisions (16 marks)

Momentum is conserved in every collision; an elastic collision conserves kinetic energy as well.

# Question Answer and marking notes
5 A 0.15 kg ball hits a wall perpendicularly at 12 m/s and rebounds at 8 m/s. Find the change in momentum of the ball and the impulse on the ball. Taking away from the wall as positive: dp = m(v – u) = 0.15 x (8 – (-12)) = 3.0 N s, away from the wall. Impulse = 3.0 N s in the same direction.
6 A 2 kg trolley moving at 6 m/s collides with a stationary 4 kg trolley and they stick together. Find the common velocity and the kinetic energy lost. Momentum: v = 2 x 6 / 6 = 2.0 m/s. Initial KE = 0.5 x 2 x 36 = 36 J; final KE = 0.5 x 6 x 4 = 12 J; loss = 24 J (heat and sound).
7 A 5 kg ball moving at 4 m/s makes a one-dimensional elastic collision with a stationary 3 kg ball. Find the velocities after the collision. v1 = (m1 – m2)/(m1 + m2) x u1 = (2/8) x 4 = 1.0 m/s; v2 = 2m1/(m1 + m2) x u1 = (10/8) x 4 = 5.0 m/s. Check: momentum 5 x 1 + 3 x 5 = 20 = 5 x 4; KE 2.5 + 37.5 = 40 J.
8 A 0.5 kg object is fired backward at 8 m/s relative to the ground from a stationary 3 kg trolley. Find the recoil speed of the trolley. Initial momentum is zero: 0 = 0.5 x (-8) + 2.5 x v, so v = 4 / 2.5 = 1.6 m/s, opposite to the object (forward). Note the trolley mass is 2.5 kg after firing.

Section C: Circular Motion (18 marks)

The centripetal force is provided by the resultant force – state which force or forces provide it.

# Question Answer and marking notes
9 An 800 kg car travels at 20 m/s round a horizontal bend of radius 50 m. Find the required centripetal force. F = mv2/r = 800 x 400 / 50 = 6400 N, provided by static friction between tyres and road.
10 A bend of radius 80 m is banked so that a car can pass safely without friction at 20 m/s. Find the banking angle. tan(theta) = v2/(rg) = 400 / (80 x 9.8) = 0.510, so theta = 27.0 deg. The horizontal component of the normal force gives the centripetal force; the vertical component balances weight.
11 A 0.5 kg ball on a 1.2 m string moves in a vertical circle. (a) Find the minimum speed at the top for the string to stay taut; (b) if the speed at the bottom is 8 m/s, find the tension there. (a) At the top with T = 0, mv2/r = mg, so v = sqrt(gr) = sqrt(9.8 x 1.2) = 3.43 m/s. (b) At the bottom T – mg = mv2/r, T = 0.5 x 64 / 1.2 + 0.5 x 9.8 = 26.7 + 4.9 = 31.6 N.
12 A centrifuge spins at 1500 rpm and a sample is 0.08 m from the axis. Find the angular speed, the centripetal acceleration, and express it in g. omega = 2 pi x 1500 / 60 = 157 rad/s; a = w2 r = 157^2 x 0.08 = 1.97 x 10^3 m/s2, about 201 g (divide by 9.8).

Section D: Work, Energy and Power (18 marks)

Use conservation of energy when there is no friction; if friction acts, account for the heat generated.

# Question Answer and marking notes
13 A force of 120 N at 30 deg above the horizontal pushes a 20 kg crate through 8 m. Find the work done by the pushing force (friction neglected). W = F s cos(theta) = 120 x 8 x cos30 = 120 x 8 x 0.866 = 831 J. Only the component along the displacement does work.
14 A pump raises 300 kg of water through 12 m in 25 s. Find its output power. P = mgh/t = 300 x 9.8 x 12 / 25 = 1411 W (about 1.4 kW). Power is the rate of doing work.
15 A spring of constant 800 N/m is compressed by 0.15 m and released, pushing a 0.5 kg block on a smooth horizontal surface. Find the elastic potential energy and the maximum speed. Energy = 0.5 k x2 = 0.5 x 800 x 0.0225 = 9.0 J; all becomes kinetic: v = sqrt(2 x 9 / 0.5) = 6.0 m/s.
16 A 5 kg object slides 4 m down a 30 deg incline with a kinetic friction coefficient of 0.25. Find the loss of potential energy, the heat generated, the final kinetic energy and the final speed. Drop = 4 sin30 = 2.0 m, so PE loss = 5 x 9.8 x 2.0 = 98 J. Friction heat = 0.25 x 5 x 9.8 x cos30 x 4 = 42.4 J. Final KE = 98 – 42.4 = 55.6 J and v = sqrt(2 x 55.6 / 5) = 4.71 m/s.

Section E: Simple Harmonic Motion (16 marks)

In SHM the acceleration is proportional to the displacement and opposite in direction: a = -w2 x.

# Question Answer and marking notes
17 An SHM has amplitude 0.08 m and period 0.5 s. Find the angular frequency, the maximum speed and the maximum acceleration. w = 2 pi / T = 12.6 rad/s; vmax = wA = 12.57 x 0.08 = 1.01 m/s; amax = w2 A = 12.63 m/s2 (at the extreme positions).
18 A spring-mass oscillator has a mass of 0.4 kg and a spring constant of 160 N/m. Find its period. T = 2 pi sqrt(m/k) = 2 pi sqrt(0.4 / 160) = 2 pi x 0.05 = 0.314 s. The period does not depend on the amplitude.
19 A simple pendulum is 1.0 m long (g = 9.8 m/s2). (a) Find its period; (b) what length gives double the period? (a) T = 2 pi sqrt(L/g) = 2 pi sqrt(1/9.8) = 2.01 s. (b) T varies as sqrt(L), so doubling T needs 4 times the length = 4.0 m.
20 A 0.2 kg body undergoes SHM with angular frequency 10 rad/s and amplitude 0.05 m. Find the total energy and, at half the amplitude, the potential energy, kinetic energy and speed. k = m w2 = 20 N/m; total energy = 0.5 k A2 = 0.025 J. At x = A/2, PE = 0.5 x 20 x 0.025^2 = 0.00625 J, KE = 0.01875 J and v = sqrt(2 x 0.01875 / 0.2) = 0.433 m/s.

Section F: Data Analysis and Applications (16 marks)

Significant figures and units carry marks; take the absolute value of the percentage error.

# Question Answer and marking notes
21 A ticker-tape timer pulls a 0.5 kg trolley; the speeds are 0.42 m/s at t = 0.1 s, 0.78 m/s at t = 0.2 s and 1.14 m/s at t = 0.3 s. Find the acceleration and the net force on the trolley. a = (1.14 – 0.42) / (0.3 – 0.1) = 0.72 / 0.2 = 3.6 m/s2; F = ma = 0.5 x 3.6 = 1.8 N. The speed rises 0.36 m/s every 0.1 s, so the acceleration is uniform.
22 A pendulum experiment gives g = 9.62 m/s2 while the accepted value is 9.81 m/s2. Find the percentage error and state two possible sources of error. Percentage error = |9.62 – 9.81| / 9.81 x 100% = 1.94%. Possible sources: the bob radius was left out when measuring the length; timing only a few oscillations magnifies the reaction-time error.
23 A 1200 kg car travels at 25 m/s and brakes with a force of 9000 N. (a) Find the stopping distance; (b) what is the distance if the speed is doubled? (a) KE = 0.5 x 1200 x 625 = 3.75 x 10^5 J; d = E / F = 375000 / 9000 = 41.7 m. (b) KE varies as v2, so doubling the speed needs 4 times the distance = 167 m.
24 A motor with an input power of 1.2 kW raises a 500 N load through 6 m at constant speed in 4 s. Find the useful power and the efficiency. Useful power = F s / t = 500 x 6 / 4 = 750 W; efficiency = 750 / 1200 x 100% = 62.5%. The other 450 W is lost mainly to friction and heating in the motor.

Find a tutor — freeTutor Registration →

A TutorZone practice paper; original questions and passages, not publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →