S6 Chemistry Practice Paper | Hess law, equilibrium constant, electrolysis, titration and buffer, polymerisation and rate order
- 2026-11-17
S6 chemistry practice paper with answers: Hess law, bond energy, equilibrium constant, electrolysis charge, titration and buffer, polymerisation and rate order.
Question 1 Enthalpy of combustion and Hess law
Standard enthalpies of formation: CH4(g) is -74.8 kJ mol-1, CO2(g) is -393.5 kJ mol-1 and H2O(l) is -285.8 kJ mol-1. Also, C(s) + O2(g) gives CO2(g) with dH = -393.5 kJ mol-1, 2H2(g) + O2(g) gives 2H2O(l) with dH = -571.6 kJ mol-1, and CH4(g) + 2O2(g) gives CO2(g) + 2H2O(l) with dH = -890.3 kJ mol-1.
| # | Question | Answer and marking notes |
|---|---|---|
| 1 | (a) Find the standard enthalpy of complete combustion of methane from the formation enthalpies. | Answer: dH = [-393.5 + 2(-285.8)] – (-74.8) = -890.3 kJ mol-1. |
| 2 | (b) Find the energy released by burning 8.0 g of methane completely, with M(CH4) = 16.0 g mol-1, to one decimal place. | Answer: moles = 8.0 / 16.0 = 0.500 mol; energy = 0.500 x 890.3 = 445.2 kJ. |
| 3 | (c) Use Hess law with the three combustion enthalpies to find the standard enthalpy of formation of methane and compare it with the given value. | Answer: dHf = (-393.5) + (-571.6) – (-890.3) = 0.0 kJ mol-1, the same as the given -74.8 kJ mol-1, so the difference is 0.0 kJ mol-1. |
| 4 | (d) Given the atomisation enthalpy of C(s) as +715 kJ mol-1 and the bond enthalpy of H2(g) as +436 kJ mol-1, find the C-H bond enthalpy to one decimal place. | Answer: 715 + 2(436) – 4x = -74.8, so 4x = 1661.8 and x = 415.4 kJ mol-1, about 415 kJ mol-1. |
Question 2 Equilibrium constant and reaction quotient
At 700 K, 0.20 mol of H2, 0.20 mol of I2 and 1.60 mol of HI are sealed in a 2.0 dm3 vessel and the reaction H2(g) + I2(g) is at equilibrium giving 2HI(g).
| # | Question | Answer and marking notes |
|---|---|---|
| 5 | (a) Find the equilibrium concentration of each species and Kc. | Answer: [H2] = [I2] = 0.20 / 2.0 = 0.10 mol dm-3 and [HI] = 1.60 / 2.0 = 0.80 mol dm-3; Kc = 0.80 squared / (0.10 x 0.10) = 64. |
| 6 | (b) A further 1.00 mol of HI is added at constant temperature. Find the reaction quotient Qc at that instant and state the direction of the shift. | Answer: [HI] = 2.60 / 2.0 = 1.30 mol dm-3; Qc = 1.30 squared / (0.10 x 0.10) = 169, which exceeds Kc = 64, so the equilibrium shifts left towards the reactants. |
| 7 | (c) Another experiment has 0.10 mol of H2, 0.30 mol of I2 and 0.60 mol of HI in 2.0 dm3. Find Qc and state the direction of the shift. | Answer: the concentrations are 0.05, 0.15 and 0.30 mol dm-3; Qc = 0.30 squared / (0.05 x 0.15) = 12, which is below Kc = 64, so the equilibrium shifts right towards the products. |
| 8 | (d) In a 1.0 dm3 vessel the starting amounts are 0.50 mol of H2 and 0.50 mol of I2. Find the equilibrium concentration of HI and the percentage conversion of H2. | Answer: let x mol react; 4x squared / (0.50 – x) squared = 64 gives 2x / (0.50 – x) = 8 and x = 0.40; [HI] = 0.80 mol dm-3, [H2] = 0.10 mol dm-3 and conversion = 0.40 / 0.50 x 100% = 80%. |
Question 3 Electrolysis and Faraday calculations
A current of 2.0 A is passed through copper(II) sulphate solution for 30 minutes. The Faraday constant is 96500 C mol-1, Ar(Cu) = 63.5 and Ar(Ag) = 107.9.
| # | Question | Answer and marking notes |
|---|---|---|
| 9 | (a) Find the charge passed and the number of moles of electrons, to four decimal places. | Answer: Q = It = 2.0 x 1800 = 3600 C; n(e-) = 3600 / 96500 = 0.0373 mol. |
| 10 | (b) Find the mass of copper deposited at the cathode, to two decimal places. | Answer: n(Cu) = 0.0373 / 2 = 0.0187 mol; mass = 0.0187 x 63.5 = 1.18 g. |
| 11 | (c) If 5.0 A is passed through silver nitrate solution for 1.5 hours instead, find the mass of silver deposited to one decimal place. | Answer: Q = 5.0 x 5400 = 27000 C; n(e-) = 27000 / 96500 = 0.2798 mol; n(Ag) is the same; mass = 0.2798 x 107.9 = 30.2 g. |
| 12 | (d) Electrolysis of dilute sulphuric acid gives 240 cm3 of hydrogen at a molar volume of 24.0 dm3 mol-1. Find the volume of oxygen, the charge passed and the time needed at 0.50 A, in minutes to one decimal place. | Answer: n(H2) = 240 / 24000 = 0.0100 mol; n(O2) = 0.0050 mol, volume = 120 cm3; n(e-) = 0.02 mol so Q = 0.02 x 96500 = 1930 C; t = 1930 / 0.50 = 3860 s, that is 64.3 minutes. |
Question 4 Titration curve and buffer solution
25.0 cm3 of 0.100 M ethanoic acid with Ka = 1.8 x 10-5 is titrated with 0.100 M sodium hydroxide.
| # | Question | Answer and marking notes |
|---|---|---|
| 13 | (a) Find the volume of sodium hydroxide needed to reach the equivalence point. | Answer: n(CH3COOH) = 0.100 x 0.0250 = 2.50 x 10-3 mol; the same moles of NaOH are needed, so the volume = 2.50 x 10-3 / 0.100 = 25.0 cm3. |
| 14 | (b) Find the pH of the acid before any alkali is added, to two decimal places. | Answer: [H+] = square root of (1.8 x 10-5 x 0.100) = 1.34e-03 M; pH = 2.87. |
| 15 | (c) Find the pH after 20.0 cm3 of sodium hydroxide has been added, to two decimal places. | Answer: acid left = 2.50 x 10-3 – 2.00 x 10-3 = 5.00 x 10-4 mol and salt formed = 2.00 x 10-3 mol; [H+] = 1.8 x 10-5 x (5.00e-04 / 2.00e-03) = 4.50e-06 M; pH = 5.35. |
| 16 | (d) Find the pH after 12.5 cm3 of sodium hydroxide has been added and explain the buffer action at that point. | Answer: the acid and the salt are present in equal amounts of 1.25 x 10-3 mol, so [H+] = Ka and pH = pKa = 4.74. The solution holds both unreacted ethanoic acid and sodium ethanoate, which neutralise small additions of strong acid or alkali, so the pH changes very little. |
Question 5 Condensation and addition polymerisation
A polyethylene sample has an average molecular mass of 280000 and its repeat unit is C2H4 with a molar mass of 28.0 g mol-1. Nylon-6,6 is made by condensing adipic acid with hexane-1,6-diamine and has the repeat unit C12H22N2O2. The repeat unit of the polyester PET is C10H8O4, with Ar values C = 12.01, H = 1.008, N = 14.01 and O = 16.00.
| # | Question | Answer and marking notes |
|---|---|---|
| 17 | (a) Find the degree of polymerisation of the polyethylene. | Answer: degree of polymerisation = 280000 / 28.0 = 10000. |
| 18 | (b) Find the molar mass of the nylon-6,6 repeat unit, to two decimal places. | Answer: 12(12.01) + 22(1.008) + 2(14.01) + 2(16.00) = 226.32 g mol-1. |
| 19 | (c) If the nylon has an average molecular mass of 22632, find its degree of polymerisation and state how condensation polymerisation differs from addition polymerisation. | Answer: degree of polymerisation = 22632 / 226.32 = 100. In condensation polymerisation each bond formed releases a small molecule such as water and the monomers must each carry two functional groups, whereas addition polymerisation joins monomers that contain carbon to carbon double bonds and releases nothing. |
| 20 | (d) Find the molar mass of the PET repeat unit and the average molecular mass when the degree of polymerisation is 150, as a whole number. | Answer: 10(12.01) + 8(1.008) + 4(16.00) = 192.16 g mol-1; average molecular mass = 192.16 x 150 = 28825 g mol-1. |
Question 6 Order of reaction and half-life
Initial rate data for the reaction A + B gives C: experiment 1 has [A] = 0.10 M and [B] = 0.10 M with a rate of 2.0 x 10-3 mol dm-3 s-1; experiment 2 has [A] = 0.20 M and [B] = 0.10 M with a rate of 8.0 x 10-3; experiment 3 has [A] = 0.10 M and [B] = 0.20 M with a rate of 4.0 x 10-3.
| # | Question | Answer and marking notes |
|---|---|---|
| 21 | (a) Find the order with respect to A and with respect to B and write the rate equation. | Answer: doubling [A] from experiment 1 to 2 raises the rate four times, so the order in A is 2; doubling [B] from experiment 1 to 3 doubles the rate, so the order in B is 1. The rate equation is rate = k[A] squared [B] and the overall order is 3. |
| 22 | (b) Find the rate constant k and its unit. | Answer: k = 2.0 x 10-3 / (0.10 squared x 0.10) = 2.0 dm6 mol-2 s-1. |
| 23 | (c) Find the initial rate when [A] = 0.30 M and [B] = 0.15 M. | Answer: rate = 2.0 x 0.30 squared x 0.15 = 0.027 mol dm-3 s-1. |
| 24 | (d) A second reaction is first order with k = 0.0693 min-1. Find its half-life and the time for the concentration to fall from 0.80 M to 0.10 M. | Answer: t half = ln2 / 0.0693 = 10.0 min; the fall 0.80 to 0.40 to 0.20 to 0.10 covers 3 half-lives, so the time = 3 x 10.0 = 30.0 min. |
Find a tutor — freeTutor Registration →
A TutorZone practice paper; original questions and passages, not publisher material.



