/en-s6-chemistry-organic-nomenclature-isomerism-esterification-saponification-electrolysis-electroplating-equilibrium-constant-haber-process-polymer-recycling-practice-paper/
/en-s6-chemistry-organic-nomenclature-isomerism-esterification-saponification-electrolysis-electroplating-equilibrium-constant-haber-process-polymer-recycling-practice-paper/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S6 Chemistry Practice Paper: Organic Chemistry, Esterification and Saponification, Electrolysis and Electroplating, Chemical Equilibrium, Industrial Yield and Polymers

S6 Chemistry Practice Paper: Organic Chemistry, Esterification and Saponification, Electrolysis and Electroplating, Chemical Equilibrium, Industrial Yield and Polymers

  • 2026-11-18

S6 Chemistry – Original Practice Paper

Original S6 Chemistry practice paper with 24 questions in six parts: organic nomenclature and isomerism, esterification, electrolysis and plating, equilibrium constants,.

Paper details 

Nomenclature and Isomerism of Organic Compounds

Show all working or draw the structure. Give units in every answer.

# Question Answer and marking notes
1 How many structural isomers does the alkane with molecular formula C5H12 have? Name each isomer. Three: pentane, 2-methylbutane and 2,2-dimethylpropane.
2 Give the systematic name of (CH3)2CHCH2CH3 and state the number of carbon atoms in its principal chain. The longest chain has four carbon atoms, so the name is 2-methylbutane.
3 How many geometric isomers does but-2-ene have? Explain why geometric isomerism arises. Two (cis and trans). A carbon-carbon double bond cannot rotate freely, so the two substituents on the double bond may lie on the same side or on opposite sides.
4 Styrene is the monomer of polystyrene. Write the condensed structural formula of styrene and state how addition polymerisation differs from condensation polymerisation in terms of by-products. Styrene is C6H5CH=CH2. Addition polymerisation produces no small-molecule by-product, whereas condensation polymerisation loses a small molecule such as water for each bond formed.

Esterification, Saponification and Fats

Relative atomic masses: H 1.0, C 12.0, O 16.0, K 39.0.

# Question Answer and marking notes
5 With concentrated sulphuric acid as catalyst, 46.0 g of ethanol reacts with excess ethanoic acid. Assuming complete reaction, calculate the theoretical mass of ethyl ethanoate. Moles of ethanol = 46.0 / 46.0 = 1.00 mol; molar mass of ethyl ethanoate = 88.0 g/mol; theoretical mass = 88.0 g.
6 100 g of a fat is completely saponified and consumes 0.300 mol of potassium hydroxide. Calculate the saponification value in mg of KOH per gram of fat. Mass of KOH = 0.300 x 56.0 = 16.8 g = 16800 mg; saponification value = 16800 / 100 = 168 mg/g.
7 Name the two reactants and the two products of the saponification of a fat. Reactants: a fat (triglyceride) and sodium hydroxide solution. Products: sodium salts of fatty acids (soap) and glycerol.
8 Explain the purpose of heating during saponification and the purpose of adding common salt afterwards. Heating raises the reaction rate and melts the fat so that it contacts the alkali better. Adding salt causes salting out: the solubility of soap falls, so soap separates from the glycerol solution.

Electrolysis, Electroplating and Electrochemical Cells

Faraday constant = 96500 C/mol.

# Question Answer and marking notes
9 A current of 2.00 A passes through copper(II) sulphate solution for 1930 s. Calculate the mass of copper deposited at the cathode. (Cu = 63.5) Charge = 2.00 x 1930 = 3860 C; moles of electrons = 3860 / 96500 = 0.0400 mol; moles of copper = 0.0200 mol; mass = 0.0200 x 63.5 = 1.27 g.
10 Silver is electroplated onto a metal spoon using a current of 5.00 A. Calculate the time needed to deposit 10.8 g of silver, giving the answer in minutes. (Ag = 108) Moles of silver = 10.8 / 108 = 0.100 mol; charge = 0.100 x 96500 = 9650 C; time = 9650 / 5.00 = 1930 s = 32.2 minutes.
11 In acidic solution MnO4- is reduced to Mn2+. Write the half-equation and state the number of moles of electrons transferred per mole of MnO4-. MnO4- + 8H+ + 5e- gives Mn2+ + 4H2O; five moles of electrons are transferred per mole of MnO4-.
12 For a zinc-copper cell, E(Zn2+/Zn) = -0.76 V and E(Cu2+/Cu) = +0.34 V. Calculate the standard cell e.m.f. and state which metal is the anode during discharge. Standard e.m.f. = 0.34 – (-0.76) = 1.10 V; zinc is the anode (oxidised) and copper is the cathode (reduced).

Chemical Equilibrium

All concentrations are in mol/dm3 and the temperature is constant.

# Question Answer and marking notes
13 In a 1.0 dm3 vessel, 1.00 mol of hydrogen reacts with 1.00 mol of iodine vapour. At equilibrium 1.56 mol of hydrogen iodide is present. Calculate Kc at that temperature. Forming 1.56 mol of HI uses 0.780 mol of each reactant, so [H2] = [I2] = 0.220 mol/dm3 and [HI] = 1.56 mol/dm3; Kc = 1.56 squared / (0.220 x 0.220) = 50.3.
14 For the reaction in the previous question, would doubling the volume at constant temperature shift the position of equilibrium? Explain. No shift. The number of moles of gas is the same on both sides; doubling the volume lowers every concentration in the same proportion, so Qc remains equal to Kc.
15 State the general form of an equilibrium constant Kc and explain why pure solids do not appear in the expression. Kc is the product of product concentrations each raised to its stoichiometric number, divided by the same product for the reactants. The concentration of a pure solid is constant at fixed temperature and is absorbed into Kc.
16 For 2SO2(g) + O2(g) reversible 2SO3(g), Kc = 280 dm3/mol at a certain temperature. At equilibrium [SO2] = 0.100 mol/dm3 and [SO3] = 0.500 mol/dm3. Calculate [O2]. Kc = [SO3] squared / ([SO2] squared x [O2]), so 280 = 0.250 / (0.0100 x [O2]) and [O2] = 0.0893 mol/dm3.

Industrial Chemistry and Yield

Give percentage yields to three significant figures.

# Question Answer and marking notes
17 In the Haber process 6.00 g of hydrogen reacts with excess nitrogen. The theoretical mass of ammonia is 34.0 g but only 27.2 g is obtained. Calculate the percentage yield. Percentage yield = 27.2 / 34.0 x 100% = 80.0%.
18 In the Contact process, 3.20 g of sulphur is converted completely into sulphuric acid. Calculate the theoretical mass of sulphuric acid. (S = 32.0, H2SO4 = 98.0) Moles of sulphur = 3.20 / 32.0 = 0.100 mol; the same number of moles of acid forms; mass = 0.100 x 98.0 = 9.80 g.
19 Ethene is hydrated to ethanol: C2H4 + H2O gives C2H5OH. Calculate the atom economy and justify it with molar masses. Every atom of the reactants appears in the single product, so the atom economy is 100% (46.0 / (28.0 + 18.0) x 100% = 100%).
20 The Haber process operates at about 450 degrees Celsius and 200 atmospheres. Explain, in terms of rate and equilibrium, why a lower temperature is not used. Ammonia synthesis is exothermic, so a low temperature favours the forward reaction; however the rate would be far too slow and equilibrium would take very long to reach, so 450 degrees Celsius is a compromise between rate and yield, used together with a catalyst.

Polymers and Plastics Recycling

Answers must match the polymer structures and the recycling codes.

# Question Answer and marking notes
21 A sample of polyvinyl chloride has an average molecular mass of 62500. Calculate its degree of polymerisation. (Molar mass of the monomer C2H3Cl = 62.5 g/mol) Degree of polymerisation = 62500 / 62.5 = 1000.
22 State the type of polymerisation for polyethylene and for nylon-6,6, and give one structural difference between their main chains. Polyethylene is formed by addition polymerisation and its main chain contains only carbon atoms; nylon-6,6 is formed by condensation polymerisation and its main chain contains amide linkages with nitrogen atoms.
23 Write the condensed formula of the repeating unit of polystyrene and name its monomer. The repeating unit is -CH(C6H5)-CH2- and the monomer is styrene.
24 In the plastics recycling coding system, what number is given to polyethylene terephthalate (PET)? State one major use of recycled PET. PET carries recycling code 1; recycled PET is commonly made into polyester fibre for clothing and filling material.

Find a tutor — freeTutor Registration →

A TutorZone practice paper; original questions and passages, not publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →