DSE ICT | Network Models Prep Guide for Tutors | OSI Layers, Encapsulation and Route Arithmetic
- 2026-11-17
Students recite the seven layer names yet freeze when asked what the network layer adds, and they treat delay arithmetic as a guess. This lesson turns the model into moves students can point at: what each layer adds, which address changes at each hop, and how hops and bandwidth produce a delay.
01 Prerequisites (3-minute check)
If any of these fails, fix it before the lesson starts.
| Skill | Quick check | Pass mark |
|---|---|---|
| Bits and bytes | How many bits are in 1 MiB | 1,048,576 times 8, which is 8,388,608 bits |
| Bandwidth units | How many bits per second is 8 Mbps | 8,000,000 bits per second |
| Subnet masks | What prefix length is 255.255.255.192 | 26 bits, leaving 62 usable addresses |
| Two addresses | Which address changes when you join another network | The IP address changes, the MAC address usually does not |
02 Lesson flow (60 minutes)
| Time | Stage | Tutor does | Student does |
|---|---|---|---|
| 0-6 min | Opening probe | Ask what the post office does and what the recipient does | Write one sentence, revisit at the end |
| 6-20 min | Seven and four layers | Build two columns and name the unit each layer handles | Fill the mapping table themselves |
| 20-34 min | Encapsulation | Add headers layer by layer and draw one packet shell | Draw it and label each header |
| 34-46 min | IP versus MAC | Send one letter through three couriers and ask which address changes | State what changes at each hop |
| 46-56 min | Delay and bandwidth | Work 1 MiB over 8 Mbps and a four-hop delay | Compute once and compare |
| 56-60 min | Exit check | Collect and mark three items; reteach the failed layer next lesson | Work independently |
03 Teaching script (read it out)
Scene 1: Learn the layers by the unit they handle, not by name order
Students do: fill the four-layer mapping and write one unit per layer.
Students say: why seven minus four equals three, and where the difference sits.
Students repeat: name the unit per layer, and the two models differ by three.
Scene 2: Encapsulation: each layer adds only its own header, the receiver unwraps in reverse
Students do: draw one packet with five headers and label each field set.
Students say: why the receiver unwraps in reverse.
Students say: each layer adds only its own header, and the receiver unwraps in reverse.
Scene 3: IP covers the whole trip, MAC covers one link, routing picks the next hop
Students do: compute the four-hop round trip and the 1 MiB transfer time.
Students say: which address changes at each hop and which does not.
Students repeat: IP covers the whole trip unchanged, MAC changes at every hop.
04 Question types and worked steps
| Type | Example | Steps | Answer |
|---|---|---|---|
| Layer mapping | Which layer handles HTTPS encryption | Locate application in the four-layer model, then presentation in the seven-layer model | Presentation, inside application in the four-layer model, handling format and encryption |
| Encapsulation | What the network layer adds to a packet | Walk the layers in order, naming the unit and header | Source and destination IP addresses, forming a packet |
| Path question | A packet crosses three routers: which addresses change | Separate end-to-end from per-link | The IP pair stays the same, the MAC pair changes on every link |
| Arithmetic | Time for 1 MiB over 8 Mbps, and round trip over four hops at 1.8 ms | Bits over bandwidth; hops times per-hop times two | 1.05 seconds; 7.2 ms one way and 14.4 ms round trip |
05 Independent practice (3 questions)
| Question | Answer | What to watch |
|---|---|---|
| Layer location | Which layer splits a message into segments during email transfer | Check that they answer transport and use the word segment |
| Header sequence | List the headers added from application to cable for an HTTP request | Check the order across four layers and that data link is not skipped |
| Delay | Six hops at 2.5 ms each: what is the round-trip delay | Check that they multiply by two and answer 30 ms |
06 Common mistakes and what to say
| Mistake | Student writes | Say this |
|---|---|---|
| Reversed layer order | Adding port numbers at the network layer | Which layer decides which program receives the data? Add it at the wrong layer and the receiver cannot unwrap it. |
| MAC described as end to end | Writing that the source and destination MAC never change | A different router means a different network card, so why would the address stay the same? |
| Mixed units | Treating 1 MiB as 1,000,000 bytes | When the question says MiB, use 1,048,576; the two differ by 4.8 percent and marks are lost. |
| Missing the factor of two | Answering 15 ms for six hops at 2.5 ms | A round trip goes there and back, so which one did you compute? |
07 Homework (paper, section and question numbers)
- Secondary ICT chapter index — S6 network series for this chapter
- Prep guide master index — Matching chapters in other subjects
- Redo the chapter practice — Independent practice items 1 to 3: layer location, header sequence, delay
08 Exit check (last 5 minutes)
| Question | Answer | Decision |
|---|---|---|
| Layer units | Name the unit each layer handles | A blank unit means act one is retaught |
| Encapsulation | Headers added top down, removed in reverse | Reversed order means act two is retaught |
| IP and MAC | IP stays, MAC changes per hop | Reversed answers mean act three is retaught |
09 Tutor FAQ
Must students memorise all seven English layer names
Multiple choice uses the English terms, so recognise them, but written answers are marked on what each layer does, so a clear explanation matters more than recitation.
Should delay always be in milliseconds
Follow the unit given in the question and state it in the answer; for conversion, only one second equals one thousand milliseconds is needed.
How does this chapter differ from the S5 IP addressing chapter
S5 drills subnetting and address arithmetic, while S6 drills the model, encapsulation and paths; teach one question from both angles so students connect them.
Find a tutor — freeTutor Registration →
A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.



