/en-tutor-prep-igcse-biology-enzymes-lock-key/
/en-tutor-prep-igcse-biology-enzymes-lock-key/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

IGCSE Biology: Enzymes and the Lock-and-Key Model Lesson-Prep Guide (for tutors)

IGCSE Biology: Enzymes and the Lock-and-Key Model Lesson-Prep Guide (for tutors)

  • 2026-11-16

Students can usually say that enzymes are catalysts, then draw a temperature curve that climbs and flattens gently, forgetting that it falls off a cliff after 45 degrees. The confusion is between the reaction being fast and the enzyme still existing. This lesson separates the two with four gas rates at 20, 30, 40 and 50 degrees.

Objectives — By the end of the lesson students can: (1) explain how enzymes speed up reactions by lowering activation energy – from 100 to 60 kilojoules per mole, a fall of 40 – and distinguish lock-and-key from induced fit; (2) use 12 cubic centimetres per minute at 20 degrees and a Q10 of 2 to get 24 at 30 degrees, 48 at 40 and 0 at 50, and explain why 50 is zero rather than slow; (3) identify the limiting factor: adding enzyme does nothing when substrate is limiting, adding substrate does nothing when enzyme is limiting, and doubling enzyme raises Vmax from 40 to 80.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Protein structure What are proteins made of, and what denatures them? Names the amino acid chain and three-dimensional shape; knows heat and extreme pH destroy it
Rate of reaction How is a rate calculated? Amount of product divided by time, with units stated
Catalysts What happens to a catalyst during a reaction? It is not used up and can be reused

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-6 min Opening question Ask why a 40 degree fever feels awful and hold the answer Write a guess, revisit it against the optimum temperature
6-18 min Act 1: activation energy and models Draw the energy profile, teach lock-and-key and induced fit Mark the 40 kilojoule drop themselves
18-34 min Act 2: temperature and pH curves Compute four rates and draw the cliff Work out 40 degrees and explain the zero at 50
34-46 min Act 3: limiting factors Two scenarios: saturated substrate, doubled enzyme Decide which factor is limiting
46-55 min Practice and correction Set four questions, hunt for “the enzyme is killed” answers Work independently, correct errors
55-60 min Exit check Ask three core questions Answer orally, log errors as homework

03 Teaching script (read it out)

Scene 1: Activation energy and two models: an enzyme is not fuel

Fix the definition first: an enzyme is a biological catalyst, usually a protein, that lowers activation energy without changing the products or the overall energy change. Use concrete numbers: uncatalysed activation energy is 100 kilojoules per mole and with the enzyme 60, a drop of 40, so at a given temperature far more molecules clear the barrier. The lock-and-key model says the active site is complementary to the substrate like a lock and key; induced fit says the site is not an exact match until the substrate approaches and the site adjusts slightly, which explains specificity without rigidity. The commonest error is thinking the enzyme supplies energy – it does not; it lowers the threshold, and it is unchanged afterwards, so a small amount processes a large amount of substrate.
Students do: mark 100 and 60 on the energy profile and state in one sentence what the enzyme did.

Ask whether the enzyme is used up. If the answer is yes, return to the catalyst definition.

Scene 2: Temperature and pH: a rise, then a cliff, not a gentle plateau

This is the section most often taught badly. Separate the two effects: heating raises kinetic energy and collision frequency so the rate rises; beyond the optimum, hydrogen and ionic bonds break, the tertiary structure unravels, the active site distorts, the enzyme denatures and the rate collapses rather than decaying. Fix the numbers: 12 cubic centimetres per minute at 20 degrees, Q10 of 2, so 24 at 30 and 48 at 40; at 50 the rate is 0 because the enzyme has denatured. Denaturation is irreversible – cooling does not restore it – which is the opposite of low-temperature inhibition, where the enzyme is intact and recovers on warming. pH works the same way: amylase optimises near pH 7 and pepsin near pH 2, and moving away changes the charge distribution in the active site.
Students do: calculate the 40 degree rate and explain why 50 must be drawn as zero rather than half of 48.

Ask for the difference between denaturation and low-temperature inhibition and draw two curves if it is missing.

Scene 3: Limiting factors: adding the wrong thing changes nothing

Most marks are lost not on enzyme theory but on identifying which factor limits. Once substrate is saturating, every active site is occupied and adding more substrate leaves the rate unchanged, so enzyme quantity limits and doubling it lifts Vmax from 40 to 80. When enzyme is fixed and substrate is dilute, both adding enzyme and adding substrate raise the rate. Train one habit: ask which factor saturates first. With 120 cubic centimetres of total gas at 24 per minute at 30 degrees the run takes 5 minutes; if the rate falls partway it is because substrate is running out, not because the enzyme stopped working.
Students do: given two scenarios, name the limiting factor and say what would raise the rate.

Ask whether adding enzyme raises Vmax, and separate initial rate from maximum rate.

04 Question types and worked steps

Type Example Steps Answer
Explaining activation energy Uncatalysed 100, enzyme 60 kilojoules per mole Say the enzyme lowers activation energy, not the energy change A 40 kilojoule drop, more molecules clear the barrier
Temperature curve 12 at 20 degrees, Q10 of 2 Multiply by 2 per step; past the optimum it denatures to zero 24 at 30, 48 at 40, 0 at 50
Identifying limiting factors Adding substrate after saturation Ask which factor is saturated, then test what helps Enzyme-limited, so add enzyme
Experimental design Investigating pH on amylase Fix temperature, enzyme and substrate; vary pH only; time with iodine One variable, control at optimum pH
Sanity check (teach this): Three checks: first, a rate cannot be negative and denaturation gives exactly zero at 50 degrees; second, a Q10 of 2 means the rate doubles per 10 degrees, so an answer of 6 at 30 degrees means dividing instead of multiplying; third, doubling Vmax requires both doubled enzyme and saturating substrate. Close with the direction loop: high fever is dangerous precisely because 40 degrees approaches the upper limit for human enzymes, and brain enzymes are affected first, which matches the cliff in the curve.

05 Independent practice (3 questions)

Question Answer What to watch
12 cubic centimetres per minute at 20 degrees, Q10 of 2: find rates at 30 and 40 24 and 48 cubic centimetres per minute Checks doubling at each step
120 cubic centimetres of gas at 30 degrees: how long 5 minutes Checks 120 divided by 24
Enzyme doubled with saturating substrate: Vmax from 40 becomes? 80 Checks the substrate condition is stated
Explain a rate of zero at 50 degrees Enzyme denatured, active site distorted, irreversible Checks distinction from low-temperature inhibition

06 Common mistakes and what to say

Mistake Student writes Say this
Thinking the enzyme supplies energy Writes “the enzyme gives the reaction energy so it is faster” “The enzyme is not fuel. It lowers the barrier. The energy change is identical; what changed is how many molecules get over.”
Drawing denaturation as a gentle decline Curve slopes down smoothly after the optimum “Past the optimum the structure unravels. That is not slower, that is no active site left, so it is a cliff.”
Assuming more enzyme always speeds things up Says adding enzyme helps even when substrate is saturating “Every site is occupied. Extra enzyme only helps when substrate is plentiful; extra substrate just queues.”
Confusing denaturation with low-temperature inhibition Writes “the enzyme died when it got cold” “Cold only lowers kinetic energy and recovers on warming. Denaturation destroys structure and does not reverse.”

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Activation energy Enzymes lower it and supply no energy Wrong: reteach Act 1
Temperature curve Zero at 50 because of denaturation Wrong: redraw the Act 2 curve
Limiting factors Add enzyme once saturated Wrong: revisit Act 3

09 Tutor FAQ

Why is an enzyme specific to one substrate?

The active site shape and charge distribution are complementary to that substrate only, so other molecules cannot dock; induced fit adds the small adjustment made on approach.

Why is a 40 degree fever dangerous?

Human enzymes optimise near 37 degrees, so above that some begin to denature, and enzymes in nerve and metabolic tissue are affected first, which is why confusion appears rather than simple tiredness.

Can an enzyme be reused?

Yes. It is unchanged after the reaction, so a small amount processes a large amount of substrate, though enzymes do degrade over time and cells keep making new ones.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →