IGCSE Chemistry Acids, Bases, Salts and Titration Practice 3: multi-step calculation and error analysis
- 2026-11-19
IGCSE Chemistry Acids, Bases, Salts and Titration Practice 3: multi-step calculation and error analysis
Ten challenge items built on multi-step calculation and error analysis: concentration after dilution, percentage purity, hydrogen ions from a diprotic acid, the effect of rinsing apparatus and parallax.
Multi-step calculation and error analysis The third paper asks for multi-step reasoning: diluting 25.0 cm3 of 0.100 mol/dm3 acid to 0.0500 mol/dm3, a 2.00 g impure calcium carbonate sample giving 45.0 per cent purity from 0.0180 mol of acid, 20.0 cm3 of 0.0500 mol/dm3 sulfuric acid needing 20.0 cm3 of alkali, 15.0 cm3 of 0.0400 mol/dm3 acid supplying 0.00120 mol of H+, a water-rinsed pipette making the titre too small, reading the bottom of the meniscus to avoid parallax, full ionisation explaining conductivity, universal indicator red at pH 1 and purple at pH 13, then 24.0 cm3 and 100 cm3 of alkali in the last two items.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: IGCSE Chemistry: Acids, bases, salts and titration |
| Level | Challenge |
02 Questions (10 items)
- Foundation25.0 cm3 of 0.100 mol/dm3 hydrochloric acid is diluted with 25.0 cm3 of distilled water. What is the new concentration?
- FoundationA 2.00 g impure calcium carbonate sample uses 0.0180 mol of hydrochloric acid. Find the percentage of calcium carbonate in the sample.
- FoundationWhat volume of 0.100 mol/dm3 sodium hydroxide neutralises 20.0 cm3 of 0.0500 mol/dm3 sulfuric acid?
- FoundationHow many moles of hydrogen ions are supplied by 15.0 cm3 of 0.0400 mol/dm3 sulfuric acid?
- IntermediateA pipette is rinsed with distilled water and then used to measure the alkali. How does this affect the result?
- IntermediateWhy is the bottom of the meniscus read with the eye level with the liquid?
- ChallengeWhy does a strong acid conduct electricity better than a weak acid of the same concentration?
- ChallengeWhat colours does universal indicator show at pH 1 and at pH 13?
- Error redoWhat volume of 0.125 mol/dm3 sodium hydroxide neutralises 0.00300 mol of hydrochloric acid?
- Error redoWhat volume of 0.100 mol/dm3 sodium hydroxide completely neutralises 0.00500 mol of sulfuric acid?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 0.0500 mol/dm3. | The moles stay at 0.00250 mol but the total volume becomes 50.0 cm3. |
| 2 | 45.0%. | The ratio is 1:2, so there is 0.00900 mol of calcium carbonate, which is 0.900 g. |
| 3 | 20.0 cm3. | There is 0.00100 mol of acid and twice that, 0.00200 mol, of alkali is needed. |
| 4 | 0.00120 mol. | Sulfuric acid is diprotic, releasing two H+ ions per mole. |
| 5 | The alkali is diluted, fewer moles are transferred, so the acid titre is too small. | The pipette should be rinsed with the solution it will deliver so its concentration is unchanged. |
| 6 | To avoid parallax error so the reading is accurate. | Looking from above or below the meniscus makes the reading too high or too low. |
| 7 | It is fully ionised, so the solution contains more ions. | A weak acid is only partly ionised and has fewer mobile ions. |
| 8 | Red at pH 1 and purple at pH 13. | Universal indicator uses a colour range to show how strong the acid or alkali is. |
| 9 | 24.0 cm3. | V = n / c = 0.00300 / 0.125 = 0.0240 dm3. |
| 10 | 100 cm3. | 0.00500 mol of acid supplies 0.0100 mol of H+, so 0.0100 mol of alkali is needed. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



