IGCSE Chemistry Equilibria Paper 3 (Challenge)
- 2026-11-19
IGCSE Chemistry Equilibria Paper 3 (Challenge)
Ten challenge items use yield, moles, Kc and enthalpy to handle the industrial conditions of the Haber process, and explain the trade-off behind 450 C and 200 atm.
Ten challenge items on yield, Kc and industrial trade-offs The third paper joins chemistry to engineering: theoretical and percentage yield from the coefficients, moles from concentration and volume, substitution into Kc, heat released from delta H, and the reasoning behind the temperature and pressure compromise.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: IGCSE Chemistry: Equilibria and the Haber process |
| Level | Challenge |
02 Questions (10 items)
- FoundationWhy does the Haber process use about 450 C rather than a lower temperature?
- FoundationWhy is about 200 atm used instead of 1000 atm?
- FoundationWhat is the maximum number of moles of NH3 from 2.0 mol N2 and 6.0 mol H2?
- FoundationIf only 1.6 mol NH3 is obtained, what is the percentage yield?
- IntermediateAt equilibrium [NH3] is 0.80 mol/dm3 in a 2.0 dm3 vessel. How many moles of ammonia are present?
- IntermediateIn the same mixture [N2] is 0.40, [H2] is 1.20 and [NH3] is 0.80 mol/dm3. Find Kc.
- ChallengeA mixture contains 0.5 mol N2, 1.5 mol H2 and 1.0 mol NH3. What is the mole fraction of NH3?
- ChallengeWith delta H = -92 kJ/mol, how much heat is released when 1.7 g of NH3 (Mr = 17) is formed?
- Error redoDoes a shift to the right mean the forward rate has increased?
- Error redoDoes a catalyst change the equilibrium constant Kc?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | A low temperature raises the yield but the rate is too slow, so 450 C balances rate and yield. | Industrial conditions balance rate, yield and cost. |
| 2 | Higher pressure needs far more expensive equipment and raises the safety risk. | 200 atm is the practical balance between cost and yield. |
| 3 | 4.0 mol. | 6.0 mol H2 needs exactly 2.0 mol N2, so neither reactant is in excess. |
| 4 | 40%. | 1.6 divided by the theoretical 4.0 mol gives 0.40. |
| 5 | 1.6 mol. | Moles equal concentration multiplied by volume. |
| 6 | 0.926. | 0.80 squared divided by 0.40 times 1.20 cubed gives 0.9259. |
| 7 | 1.0 / 3.0 = 0.333. | The total is 3.0 mol, the sum of the three amounts. |
| 8 | 9.2 kJ. | 1.7 g is 0.1 mol, and 0.1 times 92 gives 9.2. |
| 9 | No. | A shift describes the net direction, while the rate can fall at the same time, for example after cooling. |
| 10 | No. | A catalyst lowers the activation energy and only speeds up the approach to equilibrium. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



