IGCSE Maths | Differentiation: Stationary Points and Kinematics — Lesson-Prep Guide for Tutors | 60-minute flow, worked steps, four common mistakes
- 2026-11-16
Students differentiate x cubed into 3x squared but forget to bring the coefficient down, call every stationary point a maximum without testing, and blend displacement with velocity. Marks cluster in three places: the coefficient rule, the second derivative test, and the meaning of zero velocity. This lesson fixes all three on the single curve y equals x cubed minus 6x squared plus 9x.
01 Prerequisites (3-minute check)
If any of these fails, fix it before the lesson starts.
| Skill | Quick check | Pass mark |
|---|---|---|
| Index laws | Differentiating 6x cubed, what happens to the 6? | It becomes 18, because the exponent multiplies the coefficient |
| Solving a quadratic | What are the roots of x squared minus 4x plus 3 equals zero? | 1 and 3, by factorising |
| Equation of a line | What is the line with gradient minus 3 through the point 2 and 2? | y equals minus 3x plus 8 |
02 Lesson flow (60 minutes)
| Time | Stage | Tutor does | Student does |
|---|---|---|---|
| 0-5 min | Prerequisite check | Write three quick checks and insist that the exponent moves onto the coefficient, redoing any miss immediately | Answer orally and write the coefficient multiplication step on the sheet |
| 5-15 min | From chord to tangent | Draw the chord through x equals 0 and x equals 2, show the gradient moving from 9 to minus 3, and define the derivative as the tangent gradient | Draw one tangent and label the gradient 9 at x equals 0 and minus 3 at x equals 2 |
| 15-28 min | The differentiation rule | Take each term in turn: x cubed becomes 3x squared, minus 6x squared becomes minus 12x, 9x becomes 9, and constants vanish | Copy twice, then differentiate y equals 5x cubed minus 2x alone |
| 28-40 min | Stationary points and the second derivative | Set the derivative to zero, solve x equals 1 and x equals 3, get y equals 4 and 0, then use the second derivative minus 6 and plus 6 to name maximum and minimum | Fill a three-column table of x, y and sign of the second derivative, and write that a minus sign means maximum |
| 40-52 min | Kinematics | Differentiate s equals t cubed minus 6t squared plus 9t for velocity, differentiate again for acceleration, and show velocity minus 3 and acceleration zero at t equals 2 | Find velocity at t equals 1 and t equals 3 and explain that zero velocity is not the same as standing still |
| 52-60 min | Practice and exit check | Hand out three exit questions, collect them, and note who named a maximum as minimum | Complete three questions independently and check that every stationary point carries a second derivative test |
03 Teaching script (read it out)
Scene 1: Act one: the derivative is the tangent gradient
Ask the student to say once: exponent to the front as a multiplier, then the exponent drops by one.
Scene 2: Act two: the second derivative decides high or low
Ask the student to restate: a negative second derivative is a maximum, a positive one is a minimum, and the y values do not decide it.
Scene 3: Act three: zero velocity is not standing still
Ask the student to restate: differentiate displacement for velocity, differentiate again for acceleration, and zero velocity only means a turn.
04 Question types and worked steps
| Type | Example | Steps | Answer |
|---|---|---|---|
| Differentiate | y equals x cubed minus 6x squared plus 9x | Take each term, move the exponent to the front and drop it by one, removing constants | dy by dx equals 3x squared minus 12x plus 9 |
| Tangent at a point | At x equals 2 | Substitute x for gradient minus 3, substitute into the curve for y equals 2, then write the line | y equals minus 3x plus 8 |
| Stationary points and their nature | The same curve | Set the derivative to zero, solve, substitute back, then test with the second derivative | x equals 1 gives y equals 4, a maximum; x equals 3 gives y equals 0, a minimum |
| Kinematics | s equals t cubed minus 6t squared plus 9t | Differentiate for velocity, differentiate again for acceleration, set each to zero | Velocity zero at t equals 1 and 3; acceleration zero at t equals 2 with velocity minus 3 |
05 Independent practice (3 questions)
| Question | Answer | What to watch |
|---|---|---|
| Differentiate y equals 5x cubed minus 2x | dy by dx equals 15x squared minus 2 | Check that the exponent moved onto the coefficient |
| Find the tangent to y equals x cubed minus 6x squared plus 9x at x equals 2 | Gradient minus 3, line y equals minus 3x plus 8 | Check the gradient is found before the point, and that the constant is right |
| Find the stationary points and their nature for the same curve | x equals 1 gives y equals 4, a maximum; x equals 3 gives y equals 0, a minimum | Check the second derivative was used rather than comparing y values |
| For s equals t cubed minus 6t squared plus 9t, find when velocity is zero and the acceleration at t equals 2 | t equals 1 and 3; at t equals 2 acceleration is zero and velocity is minus 3 | Check the three layers are kept apart and that units are written |
06 Common mistakes and what to say
| Mistake | Student writes | Say this |
|---|---|---|
| Coefficient not multiplied by the exponent | x cubed written as 3x cubed, or minus 6x squared as minus 12x cubed | The exponent goes to the front as a multiplier and drops by one, both at the same time. |
| Nature decided by the y value | Seeing y equals 4 larger than y equals 0 and calling x equals 1 the maximum | Use the second derivative: substituting x equals 1 gives minus 6, and the minus sign is what makes it a maximum. |
| Stationary y taken from the derivative | Substituting x equals 1 into the derivative, getting 0, and writing y equals 0 | Substitute into the original cubic, never into the derivative. |
| Velocity and displacement mixed | Writing that velocity is zero at t equals 3 so displacement is zero, without computing it | Displacement comes from the original expression and velocity from the derivative; write them on separate lines with their units. |
07 Homework (paper, section and question numbers)
- IGCSE Maths: graphs of linear and quadratic functions — Curve shape and intercepts, needed when drawing tangents
- IGCSE Maths: algebra and quadratics guide — Solving quadratics is the step that finds stationary points
- IGCSE Maths lesson-prep index — Order of the other chapters and their practice
08 Exit check (last 5 minutes)
| Question | Answer | Decision |
|---|---|---|
| Differentiate y equals 4x cubed plus 6x | dy by dx equals 12x squared plus 6 | A miss here means the coefficient rule failed, so reteach act one |
| Find and classify the stationary point of y equals x squared minus 4x | x equals 2, y equals minus 4, second derivative plus 2 so a minimum | A miss here means the second derivative was skipped, so reteach act two |
| For s equals 2t squared minus 8t, find when velocity is zero | Velocity 4t minus 8, so t equals 2 | A miss here means the layers were mixed, so reteach act three |
09 Tutor FAQ
Which part of the IGCSE syllabus is this?
Differentiation is Extended content; Core students only meet rates and simple graph gradients, while Extended students differentiate polynomials, locate stationary points, classify them with the second derivative and handle the three kinematics layers.
Can this chapter run before quadratic equations?
No. Finding stationary points always means solving a quadratic, and the second prerequisite check exists to catch that gap; without it the lesson becomes copying steps with no reasoning.
Why teach everything on one curve?
A single curve y equals x cubed minus 6x squared plus 9x carries differentiation, tangents, stationary points and kinematics, so students stop re-reading a new context each time and spend their attention on what each step is checking.
Find a tutor — freeTutor Registration →
A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.



