/en-tutor-prep-p2-solid-shapes-faces-edges-vertices/
/en-tutor-prep-p2-solid-shapes-faces-edges-vertices/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Primary 2 Maths | Solid Shapes (II) Lesson-Prep Guide (for tutors) | Faces, edges, vertices

Primary 2 Maths | Solid Shapes (II) Lesson-Prep Guide (for tutors) | Faces, edges, vertices

  • 2026-11-16

The usual Primary 2 error when counting faces is to miss the bottom one. The rule is to feel the shape in the hands rather than count it with the eyes.

Objectives — The pupil can: (1) count 6 faces, 12 edges and 8 vertices on a cube and a cuboid; (2) say how a cube differs from a cuboid (whether the edges are equal); (3) draw what is seen from the front, the top and the side; (4) recognise a solid from its face, edge and vertex counts.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Solids (I) knows sphere, cylinder, cone, cube, cuboid Primary 1 work
Square and rectangle recognises both plane figures Primary 2 quadrilaterals

02 Lesson flow (40 minutes)

Time Stage Tutor does Student does
0–5 min Diagnose one cube and one cuboid describes the difference
5–18 min Count feel and count with stickers 6 / 12 / 8
18–28 min Cube vs cuboid measure the edges equal edges versus not
28–38 min Three views look from three directions and draw three drawings correct
38–40 min Exit check three questions all correct

03 Teaching script (read it out)

Scene 1: Act 1: Feel, do not just look

Give the pupil a solid cube made of wood or card. Ask how many faces and the pupil will count five, missing the bottom. The reliable method is to hold the solid and feel each face with the palm, sticking a small sticker on every face felt, then counting the stickers. An edge is where two faces meet; a vertex is where three edges meet.

Tutor line: “Do not only look. Hold it and feel each face, put a sticker on every one you touch. How many stickers?”

Scene 2: Act 2: Cube against cuboid, by measuring

Give one cube and one cuboid and measure the edges with a ruler. Every one of the twelve edges of a cube is equal and all six faces are squares; a cuboid usually has three different lengths (length, width, height) and six rectangular faces, though two may be square. Pupils often say the bigger object must be the cuboid, so the numbers have to settle it.

Tutor line: “Measure the edges. A cube has twelve equal edges; a cuboid does not – are these three the same?”

Scene 3: Act 3: Looking from three directions

Place the solid on the table and draw what is seen from the front, the top and the side. A cube shows a square from all three directions; a cuboid shows three different rectangles. This teaches that one object looks different from different positions, which prepares the work on views in later years.

Tutor line: “Look from the front – what shape? Now crouch and look from above. Now walk round to the side. Draw all three.”

04 Question types and worked steps

Type Example Steps Answer
Count faces, edges, vertices feel and count, using stickers never miss the bottom face
Compare cube and cuboid measure the twelve edges compare edge lengths, not overall size
Three views: what shape from above crouch to eye level and draw draw all three directions
Recognise a solid from its counts count and match the numbers cube and cuboid share 6 / 12 / 8
Sanity check (teach this): Primary 2 handles only the cube and the cuboid: 6 faces, 12 edges, 8 vertices, plus a first look at three views. Euler is not taught, and neither are the faces and edges of a cylinder or cone, because curved surfaces are hard to define at this age. Edge and side may be used interchangeably, but the pupil should have heard the word edge.

05 Independent practice (3 questions)

Question Answer What to watch
How many faces does a cube have? 6 count the bottom too
How many edges does a cube have? 12 4 top + 4 bottom + 4 side
How many vertices does a cube have? 8 4 top + 4 bottom
What is the main difference between a cube and a cuboid? A cube has twelve equal edges and six square faces; a cuboid does not compare the edges
What shape do you see looking down on a cube? a square all three views agree

06 Common mistakes and what to say

Mistake Student writes Say this
Missing the bottom face counting five faces “Hold it and feel – you can feel the bottom.”
Judging by overall size the bigger one must be the cuboid “Measure the edges; do not go by size.”
Confusing a vertex with a corner of a face pointing at a face corner “A vertex is where three edges meet, not the corner of one face.”
Drawing only one view drawing the front only “All three directions are needed; the top may differ.”

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
How many faces does a cuboid have? 6 if wrong: redo the feeling count
How many edges does a cube have? 12 if wrong: recount 4 + 4 + 4
Looking down on a cube, what shape? a square if wrong: redo the three views

09 Tutor FAQ

Why must real objects be used?

Primary 2 pupils are still building spatial sense and misread printed drawings of solids. Holding the object turns a face into something countable.

Should Euler be taught?

No. Primary 2 counts numbers only; the relation between faces, edges and vertices is lower-secondary material, and giving it early replaces understanding with memorisation.

How many faces has a cylinder?

Strictly three, counting the curved surface, but Primary 2 does not treat curved surfaces, so the curriculum asks only about cubes and cuboids.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →