/en-tutor-prep-s1-ict-computer-systems-hardware-practice-3/
/en-tutor-prep-s1-ict-computer-systems-hardware-practice-3/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Paper 3: Challenge: performance and faults

Paper 3: Challenge: performance and faults

  • 2026-11-21

Paper 3: Challenge: performance and faults

Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.

Paper 3 Ten items on this chapter with answers for immediate marking.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: S1 ICT: computer systems and hardware
Level Challenge

02 Questions (10 items)

  1. FoundationWith 51.2 GB/s of memory bandwidth, how long does moving 10 GB take at best?
  2. FoundationA 3.5 GHz four-core chip retires 1.5 instructions per cycle; what is the ideal throughput?
  3. FoundationCopying 500 GB takes how long at 3,500 MB/s?
  4. FoundationThe same 500 GB on a 550 MB/s SATA drive takes how long, and how many times slower?
  5. IntermediateA 150 W machine runs all year round; what is the annual energy use and cost at 1.2 dollars per kWh?
  6. IntermediateA 600 W supply is certified at 90 percent efficiency; how much is usable and how much becomes heat?
  7. ChallengeMoving the system disk from a hard disk to an SSD cuts start-up from 40 seconds to 10; how much faster?
  8. ChallengeA 2,000 rpm fan has seven blades; how many blades pass a fixed point each second?
  9. Error redoIs an eight-core processor always twice as fast as a four-core one?
  10. Error redoA 95 W processor runs ten hours a day for thirty days; what is the energy use and cost at 1.2 dollars per kWh?

03 Answers and one-line notes

# Answer One-line note
1 About 0.2 seconds, that is 200 milliseconds. 10,240 divided by 51,200 is 0.2 seconds, a theoretical floor that real systems rarely reach.
2 21,000,000,000 instructions per second. 3,500,000,000 times four times 1.5 gives 21,000,000,000.
3 About 146.3 seconds, that is 2.44 minutes. 512,000 divided by 3,500 gives 146.3 seconds, which is 2.44 minutes.
4 About 930.9 seconds, that is 15.5 minutes, roughly 6.4 times slower. 512,000 over 550 gives 930.9 seconds, and dividing by 146.3 gives 6.4.
5 1,314 kWh, costing 1,576.8 dollars. 0.15 times 24 times 365 is 1,314 kWh, and 1,314 times 1.2 is 1,576.8 dollars.
6 540 W is usable and 60 W becomes heat. 600 times 0.9 is 540, and the 60 W difference leaves as heat.
7 Four times faster, saving 75 percent of the time. 40 over 10 is four, and the 30 seconds saved is 75 percent of 40.
8 About 233.3 blades. 2,000 over 60 is 33.33 turns per second, and seven blades give 233.3.
9 No. Twice is only the ideal ceiling, and single threaded code, IPC and memory bandwidth all limit it.
10 28.5 kWh, costing 34.2 dollars. 95 W is 0.095 kW, times ten hours is 0.95 kWh, times thirty is 28.5, and times 1.2 is 34.2 dollars.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Want the whole chapter? See all four difficulty papers on the chapter page.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →