/en-tutor-prep-s1-physics-forces-motion-speed-time-graphs/
/en-tutor-prep-s1-physics-forces-motion-speed-time-graphs/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S1 Physics | Forces and Motion Lesson-Prep Guide (for tutors) | Speed, Distance-Time Graphs, Friction, Mass and Weight

S1 Physics | Forces and Motion Lesson-Prep Guide (for tutors) | Speed, Distance-Time Graphs, Friction, Mass and Weight

  • 2026-11-20

Students describe speed as fast or slow and describe weight in kilograms. This lesson narrows speed to distance divided by time, turns weight into a force, and makes distance-time graphs the tool that turns fast and slow into a readable slope.

Objectives — Students can: (1) calculate speed as distance divided by time and convert between metres per second and kilometres per hour; (2) read the slope and the flat section of a distance-time graph and distinguish rest from steady motion; (3) separate mass in kilograms from weight in newtons and use weight equals mass times gravitational field strength on Earth and on the Moon.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Unit conversion How many metres in a kilometre, and seconds in an hour? One thousand metres and 3 600 seconds
Averages Sixty metres plus 120 metres in 30 seconds: how far per second? 180 divided by 30, that is 6 metres per second
Forces What happens when you push a parked trolley? It starts moving faster, so a force changes motion

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-6 min Diagnose Ask how you decide which of two runners is faster and collect their reasons Write your own answer and compare later
6-20 min Speed and conversion Work 120 metres in 20 seconds to get 6 metres per second, then convert 45 kilometres per hour Divide by 3.6, never multiply
20-32 min Distance-time graphs Draw one steady graph and one with a rest, reading slope and flat sections Slope is speed, flat is rest
32-44 min Force and friction Push a block on a desk and on sandpaper and compare how far it travels Friction opposes the relative motion
44-55 min Mass and weight Five kilograms weighs 49 newtons on Earth but only 9.6 newtons on the Moon with g 1.6 Mass stays, weight changes
55-60 min Exit check Three quick oral questions, re-teach any miss with one everyday example All three right before the student leaves

03 Teaching script (read it out)

Scene 1: Speed is metres per second, not a feeling

Fast and slow are feelings, not measurements. Start with a fair comparison: 100 metres in 16 seconds against 100 metres in 20 seconds, same distance so the shorter time wins. Then 100 metres in 16 seconds against 150 metres in 30 seconds, where only distance per second settles it. Fix speed as distance divided by time, in metres per second.

Convert once on the board: 45 kilometres per hour is 45 000 metres in 3 600 seconds, so 12.5 metres per second. Ask why the divisor is 3.6 and check with 36 kilometres per hour giving 10 metres per second. Finish with average speed: 60 metres in 12 seconds then 120 metres in 18 seconds is 180 metres in 30 seconds, so 6 metres per second, not the mean of two speeds.

Tutor line: average speed is total distance over total time, never the average of the two speeds.

Scene 2: A distance-time graph: the slope is the speed

Draw one graph with three stages: 0 to 4 seconds from 0 to 8 metres, 4 to 6 seconds stopped at 8 metres, 6 to 12 seconds from 8 to 20 metres. Ask for the slope of each: 2 metres per second, 0 for rest, 2 metres per second, giving 20 metres in 12 seconds overall, an average of 1.67 metres per second.

State three rules: steeper means faster, flat means stopped rather than slow, and a downward slope means travelling back. Add a return trip and watch for students who read a return as slowing down while still moving forward. This is the step that joins graphs to word problems, because every later motion graph uses the same reading.

Tutor line: every stage needs two answers, the slope and the direction, not just fast or slow.

Scene 3: Force, friction, mass and weight: four words, four meanings

A force is a push or a pull, measured in newtons. Friction acts between two surfaces and always opposes relative motion, so it points backwards while you push a block and still backwards while the block slides. Compare a desk with sandpaper and the shorter distance on sandpaper shows greater friction, which also explains why rolling beats sliding.

Then separate mass from weight: mass is the amount of matter in kilograms and does not change on the Moon, while weight is the gravitational pull in newtons, calculated as mass times field strength. Five kilograms gives 49 newtons on Earth with g 9.8, and about 9.6 newtons on the Moon with g 1.6 for a six kilogram body. Make students state that mass is constant and weight changes, and that a high Moon jump comes from smaller weight, not a lighter body.

Tutor line: when a student says I weigh 40 kilograms, show the correct pair, mass 40 kilograms and weight about 392 newtons.

04 Question types and worked steps

Type Example Steps Answer
Speed calculation A runner covers 120 metres in 20 seconds: speed? Divide distance by time and keep the seconds in the unit 6 metres per second
Unit conversion What is 45 kilometres per hour in metres per second? Multiply by 1 000 and divide by 3 600, that is divide by 3.6 12.5 metres per second
Average speed 60 metres in 12 seconds then 120 metres in 18 seconds: average speed? Total distance over total time, never the mean of the stages 6 metres per second
Weight calculation A 6 kilogram mass sits where g is 1.6: what is its weight? Mass times field strength, answer in newtons 9.6 newtons
Sanity check (teach this): Sanity checks: speed must carry a time unit, so an answer in metres has lost the seconds; 45 kilometres per hour must come out below 45 metres per second, so a larger number means multiplying by 3.6 by mistake; average speed always lies between the fastest and slowest stage, so a value above the fastest stage used a wrong divisor; a flat section on a distance-time graph is rest, not slow motion; a weight in newtons is larger than the same number of kilograms on Earth because g is about 9.8, and on the Moon six kilograms giving 9.6 newtons is far below the 58.8 newtons on Earth; mass never changes, so any claim that mass drops on the Moon inverts the concept.

05 Independent practice (3 questions)

Question Answer What to watch
Graph reading Zero to 4 seconds reaching 8 metres, rest until 6 seconds, then 20 metres at 12 seconds: average speed? Expect 1.67 metres per second from 20 metres in 12 seconds
Reverse conversion What is 10 metres per second in kilometres per hour? Multiply by 3.6 to get 36 kilometres per hour
Mass versus weight What happens to a backpack on the Moon? Mass unchanged, weight about one sixth

06 Common mistakes and what to say

Mistake Student writes Say this
Speed without time Writing a speed of 6 metres Speed needs a per second unit, so 6 metres per second
Averaging speeds Adding 5 and 10 then halving to get 7.5 Use total distance over total time, which gives 6 metres per second here
Weight in kilograms Saying I weigh 40 kilograms Mass is 40 kilograms and weight about 392 newtons, the units are not interchangeable
Friction direction Saying friction pushes a sliding block forward Friction opposes relative motion, so it points backwards

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Speed calculation 300 metres in 50 seconds Only 6 metres per second counts as a pass
Mass and weight One sentence on the difference and the units Missing units or kilogram-force means re-teaching
Graph reading What a flat section shows Rest is correct, slow motion means re-teach

09 Tutor FAQ

Should we teach the acceleration formula

In S1 keep it verbal, a force changes speed, and leave the formula for S3 and senior years.

How complex should the graph be

Three stages at most, including one rest and one return, with the focus on reading slopes.

Which value of g should we use

Use 9.8 in class but tell students some questions use 10, which changes answers slightly.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →