Paper 2: Conversions, averages and density
Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: Measurement, units and precision |
| Level | Advanced |
| # | Answer | One-line note |
|---|---|---|
| 1 | 240000 cm | 1 km is 100 000 cm, so 2.4 x 100 000 = 240000 cm. |
| 2 | 259200 s | One day is 24 x 3600 = 86 400 s, so three days are 259200 s. |
| 3 | 3500 cm2 | 1 m2 is 10 000 cm2; the factor is squared for area, so 0.35 x 10 000 = 3500 cm2. |
| 4 | 200000 cm3 | 1 m3 is 1 000 000 cm3; the factor is cubed for volume, so 0.2 x 1 000 000 = 200000 cm3. |
| 5 | 12.47 cm | (12.4 + 12.5 + 12.5) / 3 = 12.4667, so the average is 12.47 cm. |
| 6 | 8.5 cm | When the start is not at zero, subtract: 11.7 – 3.2 = 8.5 cm. |
| 7 | 3.80 g/cm3 | Density = mass / volume = 45.6 / 12.0 = 3.80 g/cm3. |
| 8 | 1.58 s | 31.6 / 20 = 1.58 s; timing 20 swings rather than one makes the timing error twenty times smaller. |
| 9 | 0.005 mm | 1 um is 0.001 mm, so 5 / 1000 = 0.005 mm. |
| 10 | It shows false precision; write 12.47 cm | The reading can only be estimated to 0.01 cm, so a third decimal place is false precision. |
Want the whole chapter? See all four difficulty papers on the chapter page.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

