/en-tutor-prep-s1-physics-simple-machines-levers-pulleys/
/en-tutor-prep-s1-physics-simple-machines-levers-pulleys/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Junior Physics | Simple Machines: Levers, Pulleys, Inclined Planes and Efficiency (Tutor Guide)

Junior Physics | Simple Machines: Levers, Pulleys, Inclined Planes and Efficiency (Tutor Guide)

  • 2026-11-20

Students hear the word saving effort and assume a machine creates energy, so lifting 400 newtons with 240 newtons becomes an efficiency of 120 per cent. A machine only trades force for distance, and three numbers settle the rule.

Objectives — Students can: (1) use equal moments to balance a lever and classify the three lever types by pivot position; (2) state that a fixed pulley only changes direction while a movable pulley halves the effort but doubles the rope pulled; (3) compute the ideal effort on an inclined plane from its length and height; (4) compute efficiency as useful work over input work and explain why it stays below one.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Multiplication What is 400 times 2 800
Moments Does a longer effort arm need more force or less Less
Percentages What percentage is 200 out of 250 Eighty per cent

02 Lesson flow (45 minutes)

Time Stage Tutor does Student does
0-6 min Moment warm up Write force times distance and work 600 newtons at 0.3 metres Reach 180 newton metres and an effort of 120 newtons
6-16 min Three lever classes Draw scissors, a bottle opener and tweezers, marking pivot, load and effort Say which class saves effort
16-26 min Fixed and movable pulleys Show the effort and rope length for 300 newtons on each type Reach 150 newtons and 4 metres of rope
26-34 min Inclined plane Compare lifting one metre with pushing up a four metre slope Reach an ideal effort of 50 newtons
34-42 min Efficiency Lift 400 newtons two metres with a real effort of 240 newtons over four metres Reach 83.3 per cent and say where 160 joules went
42-45 min Exit check Collect three questions and mark at once Work independently

03 Teaching script (read it out)

Scene 1: A moment is force times distance, and balance means both sides are equal

A crowbar sits on a pivot near one end. A 600 newton load hangs 0.3 metres from the pivot, so its moment is 600 times 0.3, which is 180 newton metres. A hand placed 1.5 metres away must supply 180 divided by 1.5, which is 120 newtons. The longer the effort arm, the smaller the force needed, and that is the whole secret of saving effort: the force falls but the hand travels further.
The three lever classes are sorted by which of pivot, load and effort sits in the middle. Effort in the middle, as in tweezers, costs force but gives control. Load in the middle, as in a bottle opener or a wheelbarrow, saves force. Pivot in the middle, as in scissors, depends on which arm is longer. Mark the three points first and measure the arms, never judge by appearance.
Students do: compute the effort on a 1.5 metre arm and draw the three points.
Students say: why saving force always costs extra distance.

Students repeat: moment is force times distance, equal on both sides, and saving force always costs distance.

Scene 2: A fixed pulley changes direction while a movable pulley shares the load

A fixed pulley hangs from the ceiling and both sides of its rope carry the same tension, so a 300 newton load still needs 300 newtons. Its only gift is direction: the student can pull downwards and use body weight. A movable pulley rises with the load, two rope sections share the 300 newtons, so 150 newtons is enough, but the load rising 2 metres means 4 metres of rope pulled.
A combination of one fixed and one movable pulley still needs 150 newtons and allows a downward pull, which is why it is the standard laboratory set up. Counting rope sections is the reliable method: count the sections supporting the movable pulley and that is the effort saved, with no formula to memorise.
Students do: find the effort and rope length for 300 newtons on a movable pulley.
Students say: why a fixed pulley saves no effort.

Students repeat: fixed pulleys only change direction, movable pulleys halve the effort but double the rope.

Scene 3: A flatter slope saves effort, never work, and efficiency stays below one

Lifting a 200 newton crate one metre takes 200 joules. Pushing it up a four metre slope needs only 50 newtons, but the push lasts four metres, so the ideal work is still 200 joules. A longer, flatter slope saves more force and demands more distance, which is the arithmetic proof that a machine creates no energy.
Friction always appears in practice. Lifting 400 newtons two metres is 800 joules of useful work; a real effort of 240 newtons pulled over four metres is 960 joules of input, so efficiency is 800 divided by 960, which is 83.3 per cent, and the remaining 160 joules leave as heat and sound. Efficiency can never reach 100 per cent because friction cannot be removed, and an answer of 120 per cent claims the machine invented energy.
Students do: compute the efficiency of the 400, 2, 240 and 4 case.
Students say: where the missing 160 joules went.

Students repeat: useful work over input work is efficiency, always below one, and the rest becomes heat.

04 Question types and worked steps

Type Example Steps Answer
Lever balance A 600 newton load 0.3 metres from the pivot, effort at 1.5 metres Equal moments, so force is load moment over effort arm 120 newtons
Pulley system A 300 newton load raised 2 metres by one movable pulley Two sections share the load, so half the effort and double the rope 150 newtons, 4 metres of rope
Inclined plane A 200 newton crate up a four metre slope to one metre height Work is conserved, so work divided by slope length 50 newtons
Efficiency Useful work 800 joules, input work 960 joules Useful over input, times one hundred 83.3 per cent
Sanity check (teach this): Both sides of a moment are newton metres, so an answer in newtons means only the force was computed; a fixed pulley never needs less than the load, so 150 newtons for 300 newtons describes a movable pulley; a slope can never need less total work than lifting straight up, so anything below 200 joules is wrong; efficiency above 100 per cent would create energy, and one is the ceiling.

05 Independent practice (3 questions)

Question Answer What to watch
A bottle opener has a 12 centimetre effort arm and a 2 centimetre load arm, opening a 60 newton cap: find the effort 60 times 2 divided by 12 gives 10 newtons Whether the two arms were swapped
A movable pulley lifts 500 newtons 1.5 metres with a real effort of 280 newtons: find the efficiency Useful 750 joules, input 840 joules, so 89.3 per cent Whether the rope length was taken as 1.5 metres
A five metre slope rises one metre and pushes a 300 newton crate: find the ideal effort 300 times 1 divided by 5 gives 60 newtons Whether height and length were multiplied the wrong way

06 Common mistakes and what to say

Mistake Student writes Say this
Saving effort means saving work Student says: the pulley halves the force, so it halves the work too. A machine creates no energy: the force falls but the distance grows, and work can only increase through friction.
Treating a fixed pulley as movable Student says: a fixed pulley halves the effort. Both sides of a fixed pulley carry the same tension, so 300 newtons still needs 300 newtons. Only a movable pulley halves it.
Efficiency above one hundred Student says: efficiency is 120 per cent because I saved force. Efficiency is useful work over input work and cannot exceed 100 per cent; a higher figure means useful work was overstated or friction omitted.
Writing the moment in newtons Student says: the moment is 180 newtons. A moment is force times distance, so the unit is newton metres; newtons alone means half the calculation was submitted.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
A 600 newton load sits 0.3 metres from the pivot with effort at 1.5 metres: find the force 120 newtons Answering 600 means reteaching act one
A movable pulley raises 300 newtons: find the effort and the rope pulled 150 newtons and 4 metres Answering 300 means reteaching act two
Useful work 800 joules with 960 joules input: find the efficiency 83.3 per cent Answering 120 means reteaching act three

09 Tutor FAQ

Which year group is this for

The S1 mechanics unit, and it also works as revision before S3 work and power.

Is 45 minutes enough

Yes, because the lesson covers moments, pulleys and efficiency, leaving slopes and combinations as homework.

Are there practice papers

Yes, the three original TutorZone chapters linked in the homework block all carry answers.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →