Junior Science (S2) | Skeleton, Muscles and Movement: tutor prep guide
- 2026-11-21
Students think of the skeleton as a dead frame and assume muscles can push. This lesson builds three habits: the joint decides the direction of movement, muscles can only pull, and a human lever is calculated once on paper so students see the body trades force for speed.
01 Prerequisites (3-minute check)
If any of these fails, fix it before the lesson starts.
| Skill | Quick check | Pass mark |
|---|---|---|
| Cell, tissue, organ and system order | Which level does muscle belong to | Tissue, muscle tissue |
| What else does the skeleton do besides support | Name a second and third function | Protect organs, make blood cells, store minerals |
| What is the place where two bones meet called | Why can the wrist turn but the skull cannot | A joint, and the joint type sets the movement |
02 Lesson flow (60 minutes)
| Time | Stage | Tutor does | Student does |
|---|---|---|---|
| 0-5 min | Hook | Feel the elbow, count the bones in one finger, guess the total in the body | Hands up, most guess one hundred and something |
| 5-15 min | Bone numbers and functions | Write 80 plus 126 equals 206, then take the five functions one at a time | Students copy five functions with one body example each |
| 15-28 min | Three joint types | Show that the elbow bends one way while the shoulder circles | In pairs, students find three one-direction joints |
| 28-42 min | Antagonistic pairs | Do one curl and have students feel biceps against triceps | Say one contracts, one relaxes, and write it down |
| 42-52 min | Lever calculation | Write 20 N times 0.30 m divided by 0.05 m and let students press the calculator | Everyone gets 120 N and explains why it exceeds 20 N |
| 52-60 min | Practice and exit check | Three independent questions, answers checked aloud | A wrong third answer means reteaching the lever arms |
03 Teaching script (read it out)
Scene 1: Bones: 206 and five functions
An adult skeleton has 206 bones: 80 axial and 126 appendicular. The axial set splits into 22 skull bones, 26 vertebrae, 24 ribs, one sternum, six ear ossicles and one hyoid, which adds to 80. The appendicular set is 64 in the arms and 62 in the legs, giving 126. The common error is treating 206 as the number at birth. A baby has about 270 separate bones, then five sacral bones fuse into one and four coccygeal bones fuse into one, leaving 206, a difference of 64.
Give every function a body example or students only memorise words: support (the spine holds the trunk up), protection (the skull guards the brain, the ribs guard heart and lungs), movement (bones act as levers and joints as pivots), blood cell formation (red marrow makes red blood cells) and mineral storage (99 percent of body calcium sits in bone). Bone is about 15 percent of body mass and skeletal muscle about 40 percent, so muscle is the tissue that burns most of the energy.
206 bones equals 80 axial plus 126 appendicular; about 270 at birth fusing to 206; five functions with five examples.
Scene 2: Joints: fixed, slightly movable, freely movable
Joints are grouped by how much they move. Fixed joints such as the skull sutures lock after childhood and protect. Slightly movable joints such as those between vertebrae allow a little movement, and the 24 movable vertebrae are separated by 23 discs, one fewer than the number of bones. Freely movable joints produce movement and come in two useful types: hinge joints such as elbow and knee move in one plane with about 0 to 135 degrees of flexion, while ball and socket joints such as shoulder and hip move in many directions through close to 360 degrees.
Have students classify by acting: elbow tucked to the side only bends and straightens, so it is a hinge; the arm drawing a big circle shows a ball and socket. Add two knee structures, the menisci that spread load and the cruciate ligaments that stop the shin sliding forward and back. If a student says the knee twists sideways, correct it on the spot, because the normal knee allows very little rotation when bent and a twist is usually ligament damage.
Fixed sutures, slightly movable vertebrae with 23 discs, freely movable hinge (elbow, knee) and ball and socket (shoulder, hip).
Scene 3: Muscles and levers: pull only, so work in pairs
Skeletal muscle attaches to bone by tendon and crosses at least one joint. Muscle can only contract, getting shorter and thicker, and it can only pull. It cannot actively lengthen, so every direction of movement needs a pair of muscles pulling against each other, an antagonistic pair. During elbow flexion the biceps contracts and shortens while the triceps relaxes and lengthens, and the reverse happens on extension. Close with the rubber band image: a rubber band cannot lengthen itself, only another band pulling it back can.
Make students run the lever numbers themselves. Lifting a 20 N load on a forearm with a load arm of 0.30 m and a biceps effort arm of only 0.05 m needs 20 times 0.30 divided by 0.05, which is 120 N, six times the load. Mechanical advantage is 0.05 divided by 0.30, about 0.17, less than one, so the lever is force-disadvantageous. The speed ratio is 0.30 divided by 0.05, which is 6, so every centimetre the muscle shortens moves the hand about six centimetres. That is why human limbs are mostly third class levers that trade force for speed, elbows and knees included.
Muscle pulls only, so pairs are needed; a human lever loses six times the force and gains six times the speed.
04 Question types and worked steps
| Type | Example | Steps | Answer |
|---|---|---|---|
| Bone numbers and functions | How many bones in an adult, and how are they split | 80 axial plus 126 appendicular, total 206 | 80 plus 126 equals 206, about 270 at birth |
| Joint classification | Which joint type are the knee and the shoulder | Knee is a hinge, shoulder is ball and socket | 0 to 135 degrees against 360 degree circling |
| Antagonistic pair | What do biceps and triceps do as the elbow bends | Biceps contracts and shortens, triceps relaxes | Muscle pulls only, so each direction needs a pair |
| Human lever | How much force does the biceps need for a 20 N load | 20 times 0.30 over 0.05 equals 120 N | Mechanical advantage 0.17, speed ratio 6 |
05 Independent practice (3 questions)
| Question | Answer | What to watch |
|---|---|---|
| Bending the elbow to 90 degrees holding a 5 kg book of 49 N, with a load arm of 0.30 m and an effort arm of 0.05 m, how much force does the biceps need | 49 times 0.30 divided by 0.05 equals 294 N | Was the weight found first with 5 times 9.81, then the six times ratio applied |
| Which class of lever is the knee, and where are the pivot, load and effort | Third class: pivot at the knee, load at the foot, effort at the patellar tendon | Check the three points are in the right order with effort in the middle |
| A 60 kg runner lands with a ground reaction of about three times body weight, so how many newtons, and why do stress fractures occur | 1766 N, and repeated large loads build up microcracks | Was 60 times 9.81 then times three used |
06 Common mistakes and what to say
| Mistake | Student writes | Say this |
|---|---|---|
| Assuming muscles can push | Saying the triceps pushes the arm back down | Muscle only contracts, so it only pulls. Asking it to push is like asking a rubber band to stretch itself, which is why every action needs a pair working against each other. |
| Treating 206 as the number at birth | Saying a baby is born with 206 bones | A baby has about 270, then five sacral bones fuse into one and four coccygeal bones fuse into one, leaving 206. The 64 bones fuse, they do not vanish. |
| Measuring joint angles from the middle of a bone | Measuring knee flexion from mid thigh to mid shin | Angles are measured at the joint axis, where the two bones meet. Measuring from the middle halves the number and ruins every later comparison. |
| Swapping the lever arms | Getting 3.3 N of muscle force for a 20 N load | A muscle force six times smaller than the load would be free energy and is impossible. The load arm of 0.30 m is longer than the effort arm of 0.05 m, so the answer must exceed 20 N. |
07 Homework (paper, section and question numbers)
- Find three joints on your own body and record the position, the type and the main direction of movement — A table of joint, hinge or ball and socket, and the movement
- Do ten curls and measure the upper arm at full contraction and at rest, then explain the change — Two measurements plus one line on shortening and thickening
- Use the lever equation for a 30 N load, a 0.28 m load arm and a 0.04 m effort arm — The working line 30 times 0.28 over 0.04 equals 210 N
08 Exit check (last 5 minutes)
| Question | Answer | Decision |
|---|---|---|
| How many bones in an adult, and how do the axial and appendicular sets split | 206 in total, 80 plus 126 | Wrong means reteaching act one |
| What do biceps and triceps do while the elbow bends | Biceps contracts and shortens, triceps relaxes | Wrong means reteaching act three |
| A 20 N load with a six to one lever ratio needs how much muscle force | 120 N | Wrong means reteaching the lever work |
09 Tutor FAQ
Do students need every bone name
No. The 80 and 126 split, the five functions and a few named bones such as femur, humerus, skull and ribs cover S2 questions comfortably.
Does the lever work need trigonometry
At S2 only perpendicular arms are used, so distances multiply directly. Components at an angle belong to S4 physics and a single sentence is enough here.
Should muscle fatigue include lactate
One line is enough: hard exercise outstrips oxygen supply, lactate builds up and the muscle weakens. The S2 focus is contraction and antagonistic pairs, not the metabolic pathway.
Find a tutor — freeTutor Registration →
A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.



