Paper 2: Capacity and speed calculations
- 2026-11-21
Paper 2: Capacity and speed calculations
Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.
Paper 2 Ten items on this chapter with answers for immediate marking.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: Computer systems, hardware and storage |
| Level | Advanced |
02 Questions (10 items)
- FoundationHow many GB is a 2 TB hard disk? (1 TB = 1024 GB)
- FoundationA computer has 8 GB of RAM and the operating system uses 3.5 GB. How much is left for programs?
- FoundationHow many seconds does a 600 MB file take to write at 50 MB/s?
- FoundationA drive sold as 1 TB (10^1^2 bytes) shows how many GB when counted in steps of 1024?
- IntermediateAn SSD reads at 500 MB/s and a hard disk at 120 MB/s. How many times faster is the SSD?
- IntermediateA 3.0 GHz processor needs four clock cycles per instruction on average. How many instructions per second?
- ChallengeA board already holds two 8 GB modules and gains two 16 GB modules. What is the total?
- ChallengeFour 500 GB disks are combined in RAID 0. What capacity is usable, and is there fault tolerance?
- Error redoHow many bytes does one minute of 44.1 kHz, 16-bit mono audio occupy, and how many MiB is that?
- Error redoA 256 GB phone is 68% full. How much space remains?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 2,048 GB | Two times 1024 gives 2,048 because every step up multiplies by 1024. |
| 2 | 4.5 GB | Subtracting 3.5 from 8 leaves 4.5, since the operating system also lives in main memory. |
| 3 | 12 seconds | Dividing 600 by 50 gives 12, because time equals size divided by speed. |
| 4 | About 931.32 GB | 10^1^2 divided by 1024^3 is 931.32; makers count in powers of ten while systems count in powers of 1024. |
| 5 | About 4.17 times | 500 divided by 120 is 4.17; a ratio needs division, not subtraction. |
| 6 | 750,000,000 instructions | Dividing 3.0 x 10^9 by four gives 7.5 x 10^8 instructions each second. |
| 7 | 48 GB | Two times 8 plus two times 16 gives 48, adding every module separately. |
| 8 | 2,000 GB with no fault tolerance | RAID 0 spreads data across all disks, so full capacity is usable but one failure loses everything. |
| 9 | 5,292,000 bytes, about 5.05 MiB | 44100 x 2 x 60 gives 5,292,000 bytes, then divide by 1,048,576 for MiB. |
| 10 | 81.92 GB | 256 x (1 – 0.68) gives 81.92, subtracting the used share from one first. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Want the whole chapter? See all four difficulty papers on the chapter page.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



