/en-tutor-prep-s2-ict-networks-internet-protocols/
/en-tutor-prep-s2-ict-networks-internet-protocols/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Junior Secondary ICT (S2) | Networks and the internet prep guide (for tutors) | Bandwidth, IP addresses and packets

Junior Secondary ICT (S2) | Networks and the internet prep guide (for tutors) | Bandwidth, IP addresses and packets

  • 2026-11-21

Students see a fast internet plan and assume a 250 MB file arrives in a second, treating Mbps and MB/s as the same unit. This lesson reduces a network to three measurable things: bandwidth, latency and packets.

Objectives — Students can: (1) explain how a LAN differs from a WAN in coverage and ownership, giving one example of each; (2) convert Mbps to MB/s and work out that a 250 MB file takes 20 seconds on a 100 Mbps line and 1 GB takes 163.84 seconds at 50 Mbps; (3) read an IPv4 address as four blocks from 0 to 255, state that 32 bits give 4,294,967,296 addresses, and count 256 addresses in a /24 subnet with 254 usable; (4) split a 4 MiB file into 1500-byte packets and get 2797 packets.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Bits and bytes How many bits are in one byte Eight, so Mbps must be divided by 8 to get MB/s
Powers of two What is 2 to the power of 8 256, the number of addresses in one subnet block
Speed formula How fast is 120 km in 2 hours 60 km per hour, and networks use the same division

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-5 min Opening question Ask how many seconds a 250 MB file needs at 100 Mbps and collect three answers on the board Write one number of seconds each and keep it for Act 2
5-20 min Act 1: LAN and WAN Draw the classroom and the whole city as two circles, comparing coverage, owner and speed Give one LAN and one WAN example and name who owns each
20-35 min Act 2: IP addresses and subnets Write 192.168.1.24, explain four blocks from 0 to 255 and 32 bits, then show 256 addresses in a /24 with 254 usable Write the subnet of the router at home and count the usable addresses
35-45 min Act 3: bandwidth, latency, packets Show 250 times 8 divided by 100 giving 20 seconds, then 4 MiB in 1500-byte packets giving 2797 packets, then 20 ms latency over 50 round trips Calculate 1 GB at 50 Mbps and write the unit
45-53 min Independent practice Circulate and intervene only when Mbps and MB/s are mixed up Finish three questions and show the unit at every step
53-60 min Exit check Mark the three answers live and re-teach Act 3 next lesson if two are wrong Self-assess and note which act to review

03 Teaching script (read it out)

Scene 1: LAN and WAN: coverage, owner and speed

Draw two circles. The first holds ten classroom computers and one router and is labelled LAN; the second covers half of Hong Kong and is labelled WAN. Ask three questions about each: how far does it reach, who owns it, how fast is it. A LAN covers a classroom or a floor, is usually owned by the school or the household, and because the cable runs are short and interference is low, 100 Mbps or even 1000 Mbps is normal. A WAN covers a city, a country or the world, the lines belong to a telecoms company, and rented bandwidth costs money, so the same price buys a much lower speed. The internet is simply the largest WAN, made of countless LANs joined by routers. Have students label the router at home as a LAN and the mobile network provider as a WAN, and point out that the owner is what separates the two.

A LAN is small and self-owned; a WAN is big and owned by a telecoms company.

Scene 2: IP addresses and subnets: four blocks from 0 to 255

Write 192.168.1.24 on the board and take it apart: four blocks, each from 0 to 255, because each block is 8 bits and 2 to the power of 8 is 256, so the whole address is 32 bits and there are 2 to the power of 32, which is 4,294,967,296 addresses. Then explain the subnet: the first three blocks are identical, so 192.168.1 is one network, and the last block is the host number, giving 192.168.1.0 to 192.168.1.255, which is 256 addresses. Two of those cannot be used: the first is the network address and the last is the broadcast address, leaving 254 usable. Test the idea: 192.168.1.24 and 192.168.1.200 sit in the same subnet and can talk directly, while 192.168.2.5 needs a router. IPv6 uses 128 bits and has so many addresses that saving them is no longer the point, which is a useful contrast for remembering why IPv6 was introduced.

Four blocks from 0 to 255; identical first three blocks mean one subnet; subtract two for 254 usable.

Scene 3: Bandwidth, latency and packets: three divisions

The first step is always the unit: Mbps means millions of bits per second, a byte is 8 bits, so 100 Mbps is 12.5 MB per second. For a 250 MB file, 250 times 8 is 2000 megabits, divided by 100 Mbps gives 20 seconds. Likewise 1 GB is 1024 MB, times 8 gives 8192, divided by 50 Mbps gives 163.84 seconds, about 2.73 minutes. The second step is latency: bandwidth sets how much travels per second while latency sets when the first bit arrives, so 20 milliseconds per round trip over 50 round trips costs 1 second that no amount of bandwidth can remove. The third step is packets: files travel in pieces, so a 4 MiB file in 1500-byte packets gives 4 times 1024 times 1024, which is 4,194,304 bytes, divided by 1500 gives 2796.20, rounded up to 2797 packets. Finish with sharing: at 7.5 Mbps per person a 100 Mbps line supports 13 users comfortably, and the fourteenth starts queueing.

Divide Mbps by 8 for MB/s; seconds equal size times 8 divided by bandwidth; packets round up.

04 Question types and worked steps

Type Example Steps Answer
Download time How long does a 250 MB file need at 100 Mbps? Multiply by 8 for megabits, then divide by bandwidth 20 seconds
Unit conversion, large file How long does 1 GB need at 50 Mbps? 1024 times 8 gives 8192, divided by 50 163.84 seconds, about 2.73 minutes
Subnet capacity How many usable addresses does 192.168.1.0/24 give? 2 to the power of 8 is 256, minus network and broadcast 254
Packet count How many 1500-byte packets carry a 4 MiB file? 4,194,304 divided by 1500, rounded up 2797 packets
Sanity check (teach this): Sanity check: the units must agree. 250 MB at 100 Mbps gives 20 seconds, which is 12.5 MB per second, and 12.5 times 20 is exactly 250, so the numbers are consistent; an answer of 2.5 seconds means the student used 100 MB per second and forgot to divide by 8. The packet count must be slightly above the raw division (2796.20 becomes 2797) because the last packet travels even when it is not full, so an answer of 2796 dropped the remainder. Usable addresses must be two fewer than the total, so 256 means the network and broadcast addresses were forgotten.

05 Independent practice (3 questions)

Question Answer What to watch
How long does a 600 MB video need at 300 Mbps fibre, and at 40 Mbps on mobile data? 4800 divided by 300 gives 16 seconds; 4800 divided by 40 gives 120 seconds, so 7.5 times slower Whether the file was multiplied by 8 first, and whether the unit is seconds
How many computers fit in 192.168.5.0/24, and how many are left after two fixed addresses for a router and a printer? 256 addresses, 254 usable, leaving 252 Whether the network and broadcast addresses were subtracted
A 40 MB photo uploads to cloud storage at 10 Mbps upstream. How long does it take? 320 divided by 10 gives 32 seconds Whether the upstream bandwidth was used rather than the downstream figure

06 Common mistakes and what to say

Mistake Student writes Say this
Treating Mbps as MB/s Answering 2.5 seconds for 250 MB at 100 Mbps Mbps counts bits and MB counts bytes, and there are 8 bits in a byte, so 100 Mbps is only 12.5 MB per second. Multiply by 8 and divide by the bandwidth and you get 20 seconds.
Rounding packets down Answering 2796 packets for a 4 MiB file in 1500-byte pieces The last packet still travels even when it is not full, so a decimal in the division always rounds up.
Forgetting network and broadcast Answering 256 usable addresses for a /24 subnet The first address names the network and the last is the broadcast address, and neither can be given to a computer, so the answer is 254.
Using download speed for an upload Timing a 40 MB upload with a 100 Mbps download figure Upload and download are separate lanes. Read the upstream speed in the contract, which for home broadband in Hong Kong is usually much slower.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
How long does a 500 MB file need at 200 Mbps? 4000 divided by 200 gives 20 seconds If wrong, re-teach Act 3: times 8, divide by bandwidth
How many usable addresses does 192.168.0.0/24 have? 254, after removing network and broadcast If wrong, re-teach Act 2: counting a subnet
What is the main difference between a LAN and a WAN? Coverage and ownership: a LAN is self-owned, a WAN belongs to a telecoms company If wrong, re-teach Act 1: the two circles

09 Tutor FAQ

A plan advertises 1000 Mbps but downloads run near 100 MB/s. Why?

Because 1000 Mbps is 1000 megabits per second, which is 125 MB per second, and protocol overhead plus the limits of the server usually leave about 100 MB per second, which is close to full speed.

Should students memorise 2 to the power of 32?

The magnitude of roughly 4.3 billion is enough; the reasoning matters more than the number. But 2 to the power of 8 equals 256 must be fluent, because every subnet depends on it.

Are there practice papers to go with this?

Yes. The homework section links to the matching practice papers and the chapter index, with question numbers following the order of the three acts.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →