Paper 4: Density retry
Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: Density: mass, volume and floating |
| Level | Retry |
| # | Answer | One-line note |
|---|---|---|
| 1 | Mass is the amount of matter in kg while density is mass per unit volume in g/cm3 | Cut a piece of iron in half and its mass halves, but its density stays the same. |
| 2 | 2 g/cm3 | 500 / 250 = 2 g/cm3. |
| 3 | 8000 kg/m3 | Multiply by 1000, so 8 x 1000 = 8000 kg/m3. |
| 4 | 40 cm3 | 90 – 50 = 40 cm3; the starting volume must be subtracted. |
| 5 | It floats | 0.9 is below the 1 g/cm3 of water, so it floats. |
| 6 | It is hollow inside | The cavity pulls the average density down; the metal itself has not changed. |
| 7 | Yes, for equal volumes the average works | Averaging is only valid for equal volumes; for equal masses the volumes must be found first. |
| 8 | g/cm3 or kg/m3 | Density divides a mass unit by a volume unit, so g/cm3 or kg/m3. |
| 9 | 200 cm3 | Volume = 300 / 1.5 = 200 cm3. |
| 10 | 1000 kg, which is one tonne | Water is 1000 kg/m3, so one cubic metre weighs 1000 kg. |
Mark your answers on the spot and redo the missed items two days later.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

