/en-tutor-prep-s2-physics-heat-temperature-expansion-transfer-practice-3/
/en-tutor-prep-s2-physics-heat-temperature-expansion-transfer-practice-3/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Paper 3: Heat and temperature challenge

Paper 3: Heat and temperature challenge

  • 2026-11-21

Paper 3: Heat and temperature challenge

Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.

Paper 3 Ten items on this chapter with answers for immediate marking.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: Heat and temperature: expansion and transfer
Level Challenge

02 Questions (10 items)

  1. FoundationA 1.5 m copper rod (alpha = 1.7e-5 per degree C) is heated by 150 degrees C. How much does it expand?
  2. FoundationWhy may a glass bottle full of water crack when heated?
  3. FoundationWhy can the water under a frozen lake surface stay at about 4 degrees C?
  4. Foundation3 kg of water is heated from 25 degrees C to 100 degrees C. How much heat is needed?
  5. IntermediateA 1000 W heater is 80 percent efficient. How many seconds does it take to heat 2 kg of water from 20 to 70 degrees C?
  6. Intermediate0.2 kg of water at 90 degrees C is mixed with 0.3 kg at 20 degrees C. What is the final temperature?
  7. ChallengeWhich way does a brass and iron bimetal strip bend when it cools?
  8. ChallengeIn which direction does heat flow on its own?
  9. Error redoWhy is there often a sea breeze at the coast during the day?
  10. Error redoWhy do wet hands feel cold when air is blown over them?

03 Answers and one-line notes

# Answer One-line note
1 3.825 mm 1.5 x 1.7e-5 x 150 = 0.003825 m, which is 3.825 mm.
2 Water expands more than the glass so its volume exceeds the capacity of the bottle Liquids expand far more than the solid container, so the water pushes hard against the glass.
3 Water is densest at 4 degrees C, so the warmer water stays at the bottom The densest water sinks, the colder water floats and freezes first, and the ice then insulates the lake.
4 945000 J Q = 3 x 4200 x 75 = 945000 J.
5 525 s Q = 2 x 4200 x 50 = 420000 J and the useful power is 800 W, so 420000 / 800 = 525 s.
6 48 degrees C (0.2 x 90 + 0.3 x 20) / 0.5 = 48 degrees C; the masses must be weighted.
7 Towards the brass side Brass contracts more than iron, so the brass side becomes shorter and the strip curves towards it, opposite to heating.
8 From a hotter body to a colder body The direction is set by the temperature difference, not by the size or mass of the bodies.
9 Land heats up faster, its air rises and cooler air from the sea flows in The sea warms more slowly, so its cooler air moves inland as the sea breeze.
10 Evaporating water takes heat from the hands Evaporation needs latent heat, which is supplied by the skin, so the hands feel cold.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Mark your answers on the spot and redo the missed items two days later.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →