S2 Science Acids and Alkalis: Ten Challenge Questions
- 2026-11-22
← Back to the Secondary Science chapter index
S2 Science Acids and Alkalis: Ten Challenge Questions
Handle leftover hydrogen ions after mixing, titration end points and weak acid ionisation, all checked in python.
Handle leftover hydrogen ions after mixing, titration end points and weak acid ionisation, all checked in python. Handle leftover hydrogen ions after mixing, titration end points and weak acid ionisation, all checked in python.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 35 minutes |
| Difficulty mix | Challenge 10 |
| Chapter | Chapter: S2 Science – Acids, Alkalis and Indicators |
| Level | S2 . acids and alkalis challenge |
02 Questions (10 items)
- ChallengeWhich has the higher hydrogen ion concentration, 0.1 M hydrochloric acid or 0.05 M sulfuric acid?
- ChallengeHow many cm3 of 0.1 M hydrochloric acid neutralise 20 cm3 of 0.15 M sodium hydroxide?
- ChallengeA solution of pH 2 is diluted 1000 times. What is the new pH?
- Challenge50 cm3 of 0.2 M hydrochloric acid is mixed with 50 cm3 of 0.1 M sodium hydroxide. What is the hydrogen ion concentration?
- ChallengePhenolphthalein turns from colourless to pink during a titration. What stage is reached and at roughly what pH?
- ChallengeA 0.01 M strong acid has pH 2 while a 0.01 M weak acid has pH 3. What does this show about the weak acid?
- ChallengeA solution has a pOH of 4.7. What is its pH?
- ChallengeNormal rain has a pH of about 5.6 because of dissolved carbon dioxide. Below what value is it called acid rain?
- ChallengeWhen sodium carbonate dissolves in water, is the pH above or below 7?
- ChallengeHow many cm3 of 0.5 M sodium hydroxide neutralise 25 cm3 of 0.5 M sulfuric acid?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | They are equal at 0.10 M | Each sulfuric acid molecule gives two hydrogen ions, so 0.05 M gives 0.10 M, the same as the hydrochloric acid. |
| 2 | 30 cm3 | There are 0.003 moles of hydroxide ions, so 0.003 moles of acid are needed, which is 0.03 litres or 30 cm3. |
| 3 | 5 | Diluting a thousandfold cuts the concentration to one thousandth, so the pH rises by three units. |
| 4 | 0.05 M, pH about 1.3 | The acid gives 0.010 moles and the alkali 0.005 moles, leaving 0.005 moles in 0.1 litres, which is 0.05 M and pH about 1.3. |
| 5 | The end point, at about pH 8 to 9 | Phenolphthalein changes near pH 8.2 to 10, so the pink colour shows the acid has been neutralised. |
| 6 | It ionises only partly | A weak acid ionises only partly, so its hydrogen ion concentration is lower than that of a strong acid of the same concentration. |
| 7 | 9.3 | At the same temperature pH plus pOH equals 14, so 14 minus 4.7 gives 9.3. |
| 8 | 5.6 | Rain saturated with carbon dioxide has a pH of about 5.6, and anything lower counts as acid rain. |
| 9 | Above 7 | Sodium carbonate hydrolyses to produce hydroxide ions, so the solution is alkaline. |
| 10 | 50 cm3 | There are 0.0125 moles of sulfuric acid giving 0.025 moles of hydrogen ions, so 0.05 litres of alkali are needed. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S2 Science courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



