S2 Science Magnets: Ten Intermediate Questions
- 2026-11-22
← Back to the Secondary Science chapter index
S2 Science Magnets: Ten Intermediate Questions
Use ampere-turns to compare strengths, and see how current direction, core material and demagnetisation matter.
Use ampere-turns to compare strengths, and see how current direction, core material and demagnetisation matter. Use ampere-turns to compare strengths, and see how current direction, core material and demagnetisation matter.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 30 minutes |
| Difficulty mix | Intermediate 10 |
| Chapter | Chapter: S2 Science – Magnets and Electromagnets |
| Level | S2 . magnetism intermediate |
02 Questions (10 items)
- IntermediateAn electromagnet coil goes from 100 turns to 200 turns with the same current. By what factor does the strength change?
- IntermediateThe current through an electromagnet rises from 0.25 A to 0.5 A with the same number of turns. By what factor does the strength change?
- IntermediateAn electromagnet has 300 turns and carries 0.4 A. What is its ampere-turn value?
- IntermediateTo reach 240 ampere-turns with only 0.6 A, how many turns are needed?
- IntermediateAn electromagnet with 1500 turns carries 0.8 A. What is its ampere-turn value?
- IntermediateWhat happens to the poles of an electromagnet when the battery connections are reversed?
- IntermediateWhy is soft iron used as the core of an electromagnet rather than steel?
- IntermediateCan two magnetic field lines cross each other?
- IntermediateIs copper wire attracted by a magnet?
- IntermediateWhat happens to a permanent magnet that is heated strongly or hammered?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | About 2 times | Strength is proportional to the number of turns, and 200 divided by 100 is 2. |
| 2 | About 2 times | Strength is proportional to current, and 0.5 divided by 0.25 is 2. |
| 3 | 120 ampere-turns | Ampere-turns are turns times current: 300 times 0.4 gives 120. |
| 4 | 400 turns | Turns equal ampere-turns divided by current: 240 divided by 0.6 gives 400. |
| 5 | 1200 ampere-turns | 1500 times 0.8 gives 1200, and more ampere-turns means a stronger magnet. |
| 6 | The poles reverse: the old N pole becomes an S pole | Reversing the current reverses the field direction, so the poles swap while the strength stays the same. |
| 7 | Soft iron loses its magnetism when the current stops, so it can be switched on and off | Soft iron is easy to magnetise and demagnetise, while steel stays magnetised after the current stops. |
| 8 | No, they never cross | If they crossed, the point would have two field directions, which is impossible. |
| 9 | No, copper is not a magnetic material | Copper and aluminium show no noticeable magnetism, so a magnet does not attract copper wire. |
| 10 | Its magnetism weakens or is lost | Heat and vibration scramble the magnetic domains, a process called demagnetisation. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S2 Science courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



