S2 Science Separation Techniques: Ten Basic Questions
- 2026-11-22
← Back to the Secondary Science chapter index
S2 Science Separation Techniques: Ten Basic Questions
Build the basics of separation, from mixtures against compounds through filtration, evaporation, distillation, chromatography, decanting, sieving and magnetism.
Build the basics of separation, from mixtures against compounds through filtration, evaporation, distillation, chromatography, decanting, sieving and magnetism. Build the basics of separation, from mixtures against compounds through filtration, evaporation, distillation, chromatography, decanting, sieving and magnetism.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 25 minutes |
| Difficulty mix | Foundation 10 |
| Chapter | Chapter: S2 Science – Separation Techniques and Mixtures |
| Level | S2 . separation techniques basics |
02 Questions (10 items)
- FoundationWhat is the main difference between a mixture and a compound?
- FoundationWhich kind of mixture can filtration separate?
- FoundationWhat does the filter paper do during filtration?
- FoundationWhich mixture is best separated by evaporation and crystallisation?
- FoundationWhich property difference does distillation use?
- FoundationWhat is chromatography commonly used to separate?
- FoundationHow is decantation carried out?
- FoundationWhat does sieving separate?
- FoundationWhich substances can a magnet pull out of a mixture?
- FoundationWhich method does a salt pan mainly use to get salt from sea water?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | The parts of a mixture keep their own properties and can be separated by physical means | A compound forms by chemical reaction and its elements combine in a fixed mass ratio. |
| 2 | An insoluble solid from a liquid | The filter paper lets the liquid through and traps the insoluble solid. |
| 3 | It lets the liquid pass and holds back the insoluble solid | The pores of the paper are smaller than the solid particles, so liquid passes and solid stays behind. |
| 4 | A solid dissolved in a solvent, from that solvent | Heating drives the solvent off and the falling solubility makes the solid come out as crystals. |
| 5 | Boiling point | The lower boiling component vaporises first and is condensed and collected separately. |
| 6 | Mixtures such as dyes that travel at different speeds on paper | Each component is adsorbed and dissolved differently, so it climbs a different distance. |
| 7 | Let it stand, then pour off the upper liquid and leave the sediment | Decantation suits coarse solids that settle quickly. |
| 8 | Solid mixtures whose particles differ in size | Small particles pass through the mesh and large ones stay on top. |
| 9 | Magnetic materials such as iron, nickel and cobalt | Copper, aluminium, sand and salt are not magnetic, so the magnet leaves them alone. |
| 10 | Evaporating the water and then crystallising the salt | Sun and wind remove the water until the salt concentration is high enough for crystals to form. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S2 Science courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



