S2 Science Water Quality: Ten Challenge Questions
- 2026-11-22
← Back to the Secondary Science chapter index
S2 Science Water Quality: Ten Challenge Questions
Multi-step work on surface loading, filtration rate, chlorine use, sludge dewatering, mixed concentration and energy use.
Multi-step work on surface loading, filtration rate, chlorine use, sludge dewatering, mixed concentration and energy use. Multi-step work on surface loading, filtration rate, chlorine use, sludge dewatering, mixed concentration and energy use.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 35 minutes |
| Difficulty mix | Challenge 10 |
| Chapter | Chapter: S2 Science – Water Quality and Sewage Treatment |
| Level | S2 . water quality challenge |
02 Questions (10 items)
- ChallengeA settling tank takes 1 200 cubic metres a day over a surface of 150 square metres. Find the surface loading in cubic metres per square metre per day.
- ChallengeFive millilitres of sewage is made up to 500 millilitres. Find the dilution factor.
- ChallengeA works produces 400 000 cubic metres a day and doses chlorine at 1.5 mg per litre. Find the daily chlorine use in kilograms.
- ChallengeA sand filter is backwashed every 30 hours. How many complete backwashes fit into one week of 168 hours?
- ChallengeSewage pH falls from 7 to 4. By what factor does the hydrogen ion concentration rise?
- ChallengeColiforms per 100 millilitres fall from 10 000 to 100. Find the removal rate.
- ChallengeSludge of 1 000 cubic metres is 97 per cent water. After dewatering it is 70 per cent water. Find the new volume if the solids stay the same.
- ChallengeTreatment uses 0.3 kilowatt hours per cubic metre for 20 000 cubic metres a day. Find the daily energy use.
- ChallengeEffluent of 100 cubic metres at 20 mg per litre of nitrate enters 900 cubic metres of river water that holds no nitrate. Find the mixed concentration.
- ChallengeA sand filter passes 3 600 cubic metres a day over 25 square metres. Find the filtration rate in metres per hour.
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 8 cubic metres per square metre per day | One thousand two hundred divided by 150 is 8; the lower the loading, the better the settling. |
| 2 | A hundredfold | Five hundred divided by five is 100, and dilution is needed before counting colonies. |
| 3 | 600 kilograms | One point five times 400 000 is 600 000 grams, that is 600 kilograms. |
| 4 | Five times | One hundred and sixty-eight over thirty is 5.6, so five complete cycles fit. |
| 5 | A thousandfold | Each unit down is ten times, so three units are ten cubed, that is 1 000 times. |
| 6 | 99 per cent | Ten thousand minus one hundred, over ten thousand, times 100, gives 99 per cent. |
| 7 | 100 cubic metres, one tenth of the original | Solids are three per cent, that is 30 cubic metres, and after dewatering they are 30 per cent, so 30 over 0.3 gives 100 cubic metres. |
| 8 | 6 000 kilowatt hours | Zero point three times 20 000 is 6 000 kilowatt hours, and aeration is the largest user. |
| 9 | 2 mg per litre | The nitrate load is 100 times 20, that is 2 000 grams, over a total of 1 000 cubic metres, giving 2 mg per litre. |
| 10 | 6 metres per hour | Three thousand six hundred over 24 is 150 cubic metres per hour, and over 25 square metres that is 6 metres per hour. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S2 Science courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



