/en-tutor-prep-s3-chemistry-acids-alkalis-ph-indicators/
/en-tutor-prep-s3-chemistry-acids-alkalis-ph-indicators/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S3 Chemistry | Acids, alkalis and pH – tutor prep guide (for tutors) | pH scale, dilution, neutralisation and everyday uses

S3 Chemistry | Acids, alkalis and pH – tutor prep guide (for tutors) | pH scale, dilution, neutralisation and everyday uses

  • 2026-11-21

Students read pH 2 as simply very sour, yet they cannot say how many times more acidic it is than pH 4, and they cannot work out how much alkali a neutralisation needs. This lesson treats pH as a concentration scale and then matches acid to alkali in moles.

Objectives — Students can: (1) explain how the pH scale runs and what each step means; (2) recall the colour changes of litmus, methyl orange, phenolphthalein and universal indicator; (3) apply the rule that tenfold dilution moves pH one unit; (4) calculate the volume of alkali needed to neutralise an acid from moles and equation coefficients.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Moles and concentration How many moles are in 25.0 cm3 of 0.100 M hydrochloric acid? 0.0025 mol
Volume units Convert 25.0 cm3 to dm3 0.0250 dm3
Equations Write the neutralisation of hydrochloric acid with sodium hydroxide HCl + NaOH gives NaCl + H2O

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-5 min Opening check Show lemon juice, soapy water and tap water, ask which pH is lowest Name lemon juice with a reason
5-20 min Scene 1: pH and indicators Walk the 0-14 scale and fill the colour table Fill colours, judge three samples
20-35 min Scene 2: dilution Dilute 0.10 M tenfold and watch pH move 1 to 2 Calculate pH after dilution
35-45 min Scene 3: neutralisation Compare hydrochloric and sulphuric acid volumes Get 25.0 and 50.0 cm3
45-55 min Independent practice Read the questions only Answer three questions with units
55-60 min Exit check Read four questions and collect answers Write each answer

03 Teaching script (read it out)

Scene 1: pH is a concentration scale, not an adjective

Write the scale from 0 to 14 with 7 neutral. pH 1 means a hydrogen ion concentration of 0.10 mol/dm3 and pH 2 means 0.010 mol/dm3, so each unit is a factor of ten: pH 2 is ten times more acidic than pH 3, not slightly more. Use four samples: lemon juice near pH 2, tap water at 7, soapy water near 10 and bleach near 12. Then the colour table: litmus red in acid and blue in alkali; methyl orange red in acid, orange at neutral and yellow in alkali; phenolphthalein colourless in acid and neutral, pink in alkali; universal indicator running red to violet across 0 to 14.

Stress that pH measures hydrogen ion concentration, not the total amount of acid; concentrated and dilute acid can differ by three pH units.

Scene 2: Dilution: tenfold is one unit, not linear

Start with 0.10 M acid at pH 1. Diluting tenfold gives 0.010 M and pH 2; a second tenfold gives 0.0010 M and pH 3. The rule: tenfold dilution raises pH by one unit for an acid and lowers it by one for an alkali, but dilution never turns acid into alkali, the pH only approaches 7. Contrast with a hundredfold dilution of pH 2, which reaches pH 4 and drops the concentration from 0.010 to 0.0001 mol/dm3.

Students often multiply pH by ten; let them reverse it from 0.10 to 0.010 on paper.

Scene 3: Neutralisation: moles first, then coefficients

State the core idea: hydrogen ions plus hydroxide ions make water, HCl + NaOH gives NaCl + H2O in a 1:1 ratio. 25.0 cm3 of 0.100 M acid holds 0.0025 mol, so 0.0025 mol of sodium hydroxide is needed and, at the same concentration, 25.0 cm3. Switch to sulphuric acid: H2SO4 + 2NaOH gives Na2SO4 + 2H2O, one molecule releases two hydrogen ions, so 25.0 cm3 of 0.100 M acid holds 0.0050 mol of hydrogen ions and needs 50.0 cm3 of alkali, twice the volume. Finish with heat: 25 cm3 of acid plus 25 cm3 of alkali rises from 22.0 to 28.5 degrees Celsius, a 6.5 degree rise, because neutralisation is exothermic.

Every step must show moles, never volume alone; different coefficients give different volumes.

04 Question types and worked steps

Type Example Steps Answer
Comparing acidity How many times more acidic is pH 3 than pH 5? Two units, so ten times ten 100 times
Indicator colour What does phenolphthalein do in sodium hydroxide? Pink in alkali, colourless in acid Pink
Dilution What is the pH after a hundredfold dilution of pH 2? Two tenfold steps, two units pH 4
Neutralisation volume How much 0.100 M NaOH neutralises 25.0 cm3 of 0.100 M H2SO4? Moles of hydrogen ions, then divide by concentration 50.0 cm3
Sanity check (teach this): Three checks: each pH unit is a factor of ten, never simple addition; neutralisation needs moles before coefficients, and sulphuric acid doubles the alkali; and a diluted acid only approaches pH 7. An answer of pH 20 after tenfold dilution means pH was treated as a concentration.

05 Independent practice (3 questions)

Question Answer What to watch
What is the pH of 0.010 M hydrochloric acid, and after tenfold dilution? pH 2, then 0.0010 M gives pH 3 Was concentration used rather than volume?
How many cm3 of 0.100 M sodium hydroxide neutralise 25.0 cm3 of 0.100 M hydrochloric acid? 0.0025 mol, so 25.0 cm3 Were moles calculated first?
How many moles of hydrochloric acid can 0.5 g of calcium carbonate (M = 100) neutralise? 0.005 mol CaCO3, so 0.010 mol HCl Was the 2:1 coefficient used?

06 Common mistakes and what to say

Mistake Student writes Say this
Treating pH as the amount of acid pH 2 means two portions of acid pH is the negative logarithm of hydrogen ion concentration; pH 2 is 0.010 mol/dm3 and says nothing about total amount.
Adding ten to pH when diluting Tenfold dilution adds ten to pH Tenfold dilution moves pH one unit; pH 2 becomes 3, not 12.
Ignoring coefficients in neutralisation Sulphuric acid needs the same volume as hydrochloric acid One sulphuric acid molecule releases two hydrogen ions, so it needs twice the alkali.
Mixing up indicator colours Phenolphthalein turns red in acid Phenolphthalein is colourless in acid and neutral and pink in alkali; litmus is the red-blue one.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
How many times more concentrated are hydrogen ions at pH 2 than pH 4? 100 times An answer of 2 means the scale is not understood
What colour is phenolphthalein in sodium hydroxide? Pink Red belongs to litmus
How much 0.100 M NaOH neutralises 25.0 cm3 of 0.100 M H2SO4? 50.0 cm3 25.0 means the coefficient 2 was missed
Does dilution turn an acid into an alkali? No, the pH only approaches 7 A yes answer needs the scale retaught

09 Tutor FAQ

Only universal indicator is available. Can the colour table still be done?

Yes. Universal indicator covers 0 to 14, so six samples or buffers are enough to match colours.

Should students calculate the heat of neutralisation?

At S3 the temperature rise alone is enough; q = mcDt is not required, but recording a 6.5 degree rise is useful evidence.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →