Paper 2: charge calculations and reactive electrodes
- 2026-11-21
Paper 2: charge calculations and reactive electrodes
Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.
Paper 2 Ten items on this chapter with answers for immediate marking.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: Electrolysis, electroplating and chemical cells |
| Level | Advanced |
02 Questions (10 items)
- FoundationWhat charge passes when a current of 0.5 A flows for 3600 s?
- FoundationHow many moles of electrons does 1800 C represent?
- FoundationIf the anode is changed to copper while copper sulphate solution is electrolysed, what happens to the colour and concentration?
- FoundationWhere do silver ions gain electrons during silver plating?
- IntermediateWhat is the main product of a hydrogen-oxygen fuel cell?
- IntermediateWhat is the job of the porous barrier in a zinc-copper cell?
- ChallengeWhy does the anode give mainly oxygen rather than chlorine when dilute sodium chloride solution is electrolysed?
- ChallengeWhy must grease be removed from an object before plating?
- Error redoHow is the gas collected at the anode during electrolysis of water tested?
- Error redoHow much copper can be deposited at the cathode by 0.2 A for 1800 s? (molar mass of copper 63.5)
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 1800 C. | Charge equals current times time, so 0.5 times 3600 gives 1800 coulombs. |
| 2 | About 0.0187 mol. | One mole of electrons carries 96500 coulombs, and 1800 divided by 96500 is about 0.0187. |
| 3 | The anode dissolves and copper deposits at the cathode, so colour and concentration stay about the same. | The copper dissolved at the anode matches the copper deposited at the cathode, so the ion concentration holds steady. |
| 4 | At the cathode, that is on the surface of the object. | Silver ions move to the cathode and become silver atoms that stick to the object. |
| 5 | Water. | Hydrogen combines with oxygen to give water, so the cell releases little that harms the environment. |
| 6 | It lets ions pass to complete the circuit while keeping the two solutions apart. | Ions must cross to close the circuit, yet mixing the solutions would spoil the cell. |
| 7 | The solution is dilute, so chlorine dissolves and reacts with water while oxygen is released more readily. | In dilute solution the oxidation of water dominates, so oxygen is the main gas collected. |
| 8 | Grease stops metal ions from sticking, so the coating flakes off. | Only a clean surface gives a firm, even coating. |
| 9 | A glowing splint relights in it, which shows oxygen. | Oxygen supports burning and makes a glowing splint burst into flame. |
| 10 | About 0.118 g. | 360 C gives 0.00373 mol of electrons, and two electrons per copper ion give 0.00187 mol of copper, about 0.118 g. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Decide first how the gas is collected and tested; do the 24 dm3 conversion last.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



