Paper 4: common mistakes in electrolysis
- 2026-11-21
Paper 4: common mistakes in electrolysis
Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.
Paper 4 Ten items on this chapter with answers for immediate marking.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: Electrolysis, electroplating and chemical cells |
| Level | Retry |
02 Questions (10 items)
- FoundationIs the cathode of an electrolytic cell the positive electrode?
- FoundationDo electrons travel through the solution during electrolysis?
- FoundationShould the object being plated be made the anode?
- FoundationDoes the anode give oxygen when concentrated sodium chloride solution is electrolysed?
- IntermediateIs copper obtained at the anode when copper sulphate solution is electrolysed with carbon electrodes?
- IntermediateDoes molten sodium chloride conduct because it contains free electrons?
- ChallengeDoes current flow from the negative terminal through the external circuit to the positive one?
- ChallengeDo the metal ions in a plating bath keep falling during plating?
- Error redoIs the volume ratio of hydrogen to oxygen one to two in the electrolysis of water?
- Error redoIs electroplating done only for appearance?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | No, the cathode connects to the negative terminal and reduction occurs there. | The cathode gives electrons to positive ions, so it is negative; the anode is the positive one. |
| 2 | No, electrons flow only in the electrodes and the external circuit. | Inside the solution ions carry the charge; electrons do not move freely through it. |
| 3 | No, it must be the cathode. | Only at the cathode do metal ions gain electrons and settle on the object. |
| 4 | No, it gives chlorine. | Chloride ions discharge more readily in concentrated solution; oxygen dominates only when dilute. |
| 5 | No, oxygen forms there and copper deposits at the cathode. | Carbon is inert, so water is oxidised at the anode to release oxygen. |
| 6 | No, because it contains mobile ions. | Ionic compounds conduct when their ions can move; free electrons are found in metals. |
| 7 | No, it flows from the positive terminal to the negative one. | Electrons leave the negative terminal, so conventional current runs the other way. |
| 8 | No, the metal anode dissolves and replaces them, so the concentration stays about constant. | As long as the anode is the same metal as the coating, the ion concentration is maintained. |
| 9 | No, it is two to one. | Water has two hydrogen atoms for each oxygen atom, and the gas volumes follow the same ratio. |
| 10 | No, its main role is to resist rust and corrosion, and it also improves looks and wear resistance. | The metal layer keeps air and water away from the object and slows corrosion. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Decide first how the gas is collected and tested; do the 24 dm3 conversion last.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



