/en-tutor-prep-s3-chemistry-salt-preparation-solubility-practice-1/
/en-tutor-prep-s3-chemistry-salt-preparation-solubility-practice-1/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Paper 1: salt preparation methods and solubility

Paper 1: salt preparation methods and solubility

  • 2026-11-21

Paper 1: salt preparation methods and solubility

Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.

Paper 1 Ten items on this chapter with answers for immediate marking.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: Salt preparation and solubility
Level Basic

02 Questions (10 items)

  1. FoundationWhen making copper sulphate with dilute sulphuric acid, why use copper oxide instead of copper?
  2. FoundationWhy is excess copper oxide added when making copper sulphate?
  3. FoundationWhat does the filtering step remove?
  4. FoundationWhich step gives blue crystals from the copper sulphate filtrate?
  5. IntermediateWhat is the definition of solubility?
  6. IntermediateA salt has solubility 32 g at 20 C. How much dissolves in 50 g of water?
  7. ChallengePotassium nitrate has solubility 38 g at 25 C. How much dissolves in 200 g of water?
  8. ChallengeWhat is a saturated solution?
  9. Error redoWhich method makes an insoluble salt such as silver chloride?
  10. Error redoWhich reagent tests for sulphate ions in solution?

03 Answers and one-line notes

# Answer One-line note
1 Copper is below hydrogen in the reactivity series and does not react with dilute sulphuric acid. Copper oxide is a basic oxide, so it reacts with the acid to give a salt and water.
2 To make sure all the dilute sulphuric acid is used up. The leftover solid can be filtered off and stays out of the filtrate.
3 The unreacted excess copper oxide solid. The filtrate is the solution that holds the copper sulphate.
4 Evaporate to near saturation, then cool to crystallise. Evaporating to dryness drives off the water of crystallisation.
5 The mass in grams of solute that 100 g of water dissolves at a stated temperature. The denominator is the mass of water, not the mass of solution.
6 16 g Working out 32 times 50 divided by 100 gives 16.
7 76 g The water is twice 100 g, so twice the solute dissolves.
8 A solution that cannot dissolve any more of that solute at that temperature. Warming a saturated solution usually lets it dissolve more.
9 Mix two soluble salt solutions so a precipitate forms, then filter. Silver nitrate with sodium chloride gives a white silver chloride precipitate.
10 Barium chloride solution gives a white precipitate. Dilute nitric acid removes the interference from barium carbonate.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Decide first how the gas is collected and tested; do the 24 dm3 conversion last.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →