/en-tutor-prep-s3-chemistry-salt-preparation-solubility-practice-4/
/en-tutor-prep-s3-chemistry-salt-preparation-solubility-practice-4/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Paper 4: common mistakes in salt preparation

Paper 4: common mistakes in salt preparation

  • 2026-11-21

Paper 4: common mistakes in salt preparation

Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.

Paper 4 Ten items on this chapter with answers for immediate marking.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: Salt preparation and solubility
Level Retry

02 Questions (10 items)

  1. FoundationA student evaporates copper sulphate solution to dryness. What is wrong?
  2. FoundationCan copper strips and dilute sulphuric acid make copper sulphate?
  3. FoundationReading solubility 36 g as 36 g of salt per 100 g of solution is wrong because why?
  4. FoundationWhat happens if too little copper oxide is added?
  5. IntermediateCan silver nitrate solution alone make silver chloride?
  6. IntermediateWhy is throwing away the filtrate a mistake?
  7. ChallengeWhy is washing a precipitate with plenty of hot water a bad idea?
  8. ChallengeDividing 36 by 100 for the percentage by mass is wrong because why?
  9. Error redoWhat is the problem with using barium carbonate instead of barium chloride to test for sulphate?
  10. Error redoWhy does adding more solute to a saturated solution not dissolve?

03 Answers and one-line notes

# Answer One-line note
1 Overheating drives off the water of crystallisation. The right way is to evaporate to saturation and then cool.
2 No, copper does not react with dilute sulphuric acid. Copper sits below hydrogen, so copper oxide or copper carbonate is used.
3 Solubility is per 100 g of water, not per 100 g of solution. The saturated solution has a total mass of 136 g.
4 Some acid is left unreacted in the solution. Add an excess of the solid and filter it off afterwards.
5 No, it must be mixed with a soluble chloride solution. Precipitation needs two soluble salts.
6 The product is dissolved in it, so the filtrate is what must be kept. The solid is only the excess reactant.
7 Hot water dissolves part of the precipitate and lowers the yield. A little cold water is the better choice.
8 The denominator must be the solution mass, 136 g. 36 divided by 136 gives 26.5%.
9 Barium carbonate is itself a white precipitate, so it gives a false positive. Dilute nitric acid dissolves barium carbonate but not barium sulphate.
10 A saturated solution cannot dissolve more solute at that temperature. Warming it or adding water allows more to dissolve.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Decide first how the gas is collected and tested; do the 24 dm3 conversion last.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →