S3 Physics Heat and Energy Transfer Practice 2 (Advanced)
- 2026-11-21
S3 Physics Heat and Energy Transfer Practice 2 (Advanced)
Ten items practise multi-step Q = mcΔT work, heater efficiency, electricity cost and rates of heat loss, plus water versus oil specific heat capacity.
Efficiency, electricity cost and mixing Write the energy balance first and unify units, since kilowatt-hours and joules are not interchangeable.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S3 Physics: heat and energy transfer |
| Level | Advanced |
02 Questions (10 items)
- FoundationHow much energy heats 3 kg of water from 20 °C to 80 °C?
- FoundationA 1500 W heater runs for 300 s and the water absorbs 315 000 J. What is the efficiency?
- FoundationA 2000 W heater runs for 3 hours at HK$1.2 per kWh. What is the cost?
- Foundation1 kg of water at 80 °C is mixed with 1 kg at 20 °C, with no heat loss. What is the final temperature?
- Intermediate0.4 kg of water at 90 °C is mixed with 0.6 kg at 10 °C. Find the final temperature.
- Intermediate2 kg of water cools from 90 °C to 70 °C in 240 s. Find the average rate of heat loss.
- ChallengeWhy do car engines use water rather than the same mass of oil as coolant?
- ChallengeThe same energy heats 1 kg of water (4200 J/(kg·°C)) and 1 kg of oil (2000 J/(kg·°C)). Which warms more, and by what factor?
- Error redoA double-glazed window reduces heat loss from a room. Which two design features do the work?
- Error redoAn 800 W heater warms 1.5 kg of water from 20 °C to 70 °C with no heat loss. How long does it take?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 756000 J, that is 756 kJ. | ΔT is final minus initial: 80 − 20 = 60 °C. |
| 2 | Input is 450000 J, so efficiency = 315000 ÷ 450000 × 100% = 70 %. | Efficiency = useful output ÷ total input; the rest is lost to the surroundings. |
| 3 | It uses 6 kWh, so the cost is 6 × 1.2 = HK$7.2. | Convert to kW first: 2000 W = 2 kW, and kWh = kW × hours. |
| 4 | 50 °C, because equal masses end at the mean temperature. | For equal masses: final = (80 + 20) ÷ 2. |
| 5 | 42 °C. | Use a weighted mean: (0.4 × 90 + 0.6 × 10) ÷ 1.0. |
| 6 | About 700 W. | Energy released is 168 000 J; divide by 240 s. |
| 7 | Water has a specific heat capacity of 4200 J/(kg·°C), about twice that of oil, so it carries away more energy for the same temperature rise. | A larger specific heat capacity means more energy absorbed per degree. |
| 8 | The oil, by a factor of 2.1 compared with the water. | ΔT = Q ÷ (mc), so the smaller c gives the larger rise. |
| 9 | The air (or low-conductivity gas) between the panes cuts conduction, and sealing it suppresses convection. | Still air insulates well; once it circulates as convection it stops insulating. |
| 10 | About 393.8 s (6.6 min). | Find the energy first (315 000 J), then divide by 800 W. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



