S3 Science Electrolysis and Chemical Cells (Challenge)
- 2026-11-22
← Back to the Secondary Science chapter index
S3 Science Electrolysis and Chemical Cells (Challenge)
Multi-step work: moles of electrons over two hours, time to collect hydrogen, current efficiency, series charge and fuel cells.
Multi-step work: moles of electrons over two hours, time to collect hydrogen, current efficiency, series charge and fuel cells. Multi-step work: moles of electrons over two hours, time to collect hydrogen, current efficiency, series charge and fuel cells.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 35 minutes |
| Difficulty mix | Challenge 10 |
| Chapter | Chapter: S3 Science – Electrolysis and Chemical Cells |
| Level | S3 . electrolysis challenge |
02 Questions (10 items)
- ChallengeA current of 0.5 A flows for 2 hours. What charge passes and how many moles of electrons is that?
- ChallengeUsing 5 A, how long is needed to collect 12 dm3 of hydrogen? (molar volume 24 dm3/mol)
- ChallengeTheory predicts 6.4 g of copper but only 5.6 g forms. What is the current efficiency?
- ChallengeSilver plating passes 1 930 C. What mass is deposited?
- ChallengeTwo cells in series run 600 s at 1 A. What charge passes through each?
- ChallengeWhat forms at each electrode when concentrated sodium chloride solution is electrolysed?
- ChallengeCompare the energy changes in a chemical cell and an electrolytic cell.
- ChallengeIn a zinc-copper cell, which electrode is the zinc and what happens to it?
- ChallengeWhat is the main product of a hydrogen-oxygen fuel cell?
- ChallengeHow do a lead-acid accumulator and a dry cell differ over recharging?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 3 600 C, about 0.0373 mol | Two hours is 7 200 s, so 0.5 x 7 200 = 3 600 C, and 3 600 / 96 500 = 0.0373 mol. |
| 2 | About 19 300 s, roughly 5.4 hours | 12 / 24 = 0.5 mol hydrogen needing 1 mol electrons, that is 96 500 C, and 96 500 / 5 = 19 300 s. |
| 3 | 87.5% | 5.6 / 6.4 = 0.875, so 87.5 per cent; the rest drives side reactions. |
| 4 | 2.16 g | 1 930 / 96 500 = 0.02 mol electrons, so 0.02 mol silver and 0.02 x 108 = 2.16 g. |
| 5 | 600 C through each | In series the current is the same, so each cell sees 1 x 600 = 600 C. |
| 6 | Chlorine at the anode, hydrogen at the cathode, leaving sodium hydroxide in solution | Chloride ions are oxidised to chlorine at the anode, water is reduced to hydrogen at the cathode, and sodium and hydroxide ions remain. |
| 7 | A cell turns chemical energy into electrical energy; an electrolytic cell does the reverse | The reactions run in opposite directions: a cell is spontaneous, electrolysis needs a supply. |
| 8 | The negative electrode, where zinc is oxidised | Zinc is more reactive than copper, so it loses electrons to become zinc ions and the electrons flow to copper. |
| 9 | Water | Hydrogen is oxidised at the anode and oxygen reduced at the cathode, combining to water while releasing electrical energy. |
| 10 | A lead-acid accumulator can be recharged repeatedly; a dry cell generally cannot | The discharge products in a lead-acid cell can be reversed by charging, while the reaction in a dry cell cannot. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S3 Science courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



