S3 Science Electromagnets, Motors and Generators (Error Correction)
- 2026-11-22
← Back to the Secondary Science chapter index
S3 Science Electromagnets, Motors and Generators (Error Correction)
S3 Science – electromagnet errors
S3 Science – electromagnet errors S3 Science – electromagnet errors
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 25 minutes |
| Difficulty mix | Error redo 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S3 . electromagnet error correction |
02 Questions (10 items)
- Error redoA student claims an electromagnet stays strongly magnetic after the current is switched off. What is wrong?
- Error redoIs it true that an electromagnet attracts iron only?
- Error redoA student says adding turns does not change the strength. What is wrong?
- Error redoA student says the commutator is there because the supply is AC. What is wrong?
- Error redoA student says a generator and a motor work on exactly the same principle. What is wrong?
- Error redoA student says a conductor sitting still in a magnetic field gains an induced current. What is wrong?
- Error redoA student says the poles of an electromagnet do not depend on current direction. What is wrong?
- Error redoCompare a 100-turn coil at 2 A with a 200-turn coil at 1 A.
- Error redoA student says steel is a better core than soft iron. What is wrong?
- Error redoA student says a generator always outputs direct current. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | A soft iron core keeps only a very small residual magnetism. | Being switchable is exactly the advantage of an electromagnet. |
| 2 | No. | Cobalt and nickel are also attracted, so iron is not the only ferromagnetic material. |
| 3 | More turns make the field stronger. | The strength is set by the product of turns and current. |
| 4 | The commutator reverses the coil current every half turn so the turning direction stays the same. | Even on a DC supply the coil needs reversing to keep turning. |
| 5 | A generator uses induction, while a motor uses the force on a current-carrying coil in a field. | The two convert energy in opposite directions. |
| 6 | There must be relative motion or a changing field. | Without a change of flux there is no induced voltage. |
| 7 | Reversing the current swaps the poles. | That follows directly from the right-hand grip rule. |
| 8 | They are about the same. | Both have a turns times current product of 200. |
| 9 | Steel is hard to demagnetise, so its magnetism lingers after switching off. | An electromagnet must switch off cleanly, so soft iron is used. |
| 10 | A simple generator outputs alternating current, and a commutator is needed for direct current. | The output form depends on whether a commutator is fitted. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S3 Science courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



