S3 Science: Forces and Simple Machines – Paper 1 (Basic, 10 items)
- 2026-11-16
← Back to the Secondary Science chapter index
S3 Science: Forces and Simple Machines – Paper 1 (Basic, 10 items)
From moments and lever balance to pulleys, ramps and gears, build the four basic quantities and their units first.
Focus Moment = force x lever arm in N m, equal moments on a balanced lever, fixed pulley advantage 1, movable pulley 2, ramp length over height, teeth inversely related to speed, work = force x displacement in J, power = work / time in W.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 3 · Challenge 2 · Error redo 1 |
| Chapter | Chapter: S3 Science: Forces and Simple Machines |
| Level | Basic, 10 items, about 25 minutes |
02 Questions (10 items)
- FoundationA force of 20 N acts 0.5 m from a pivot. What is the moment?
- FoundationOn a lever, 20 N hangs 30 cm from the pivot on the left. What weight 20 cm to the right balances it?
- FoundationWhat is the mechanical advantage of a fixed pulley?
- FoundationOne movable pulley lifts a 100 N load. What effort is needed ideally?
- IntermediateA ramp is 5 m long and 1 m high. What is its mechanical advantage?
- IntermediateA 40-tooth gear drives a 20-tooth gear. How many times faster does the small gear turn?
- IntermediateA 50 N force pushes a box 4 m along the floor. How much work is done?
- Challenge600 J of work is done in 20 s. What is the power?
- ChallengeA movable pulley raises a load by 1 m. How much rope is pulled?
- Error redoWhat is the unit of work?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 10 N m. | Moment = force x lever arm = 20 N x 0.5 m = 10 N m, measured in newton metres. |
| 2 | 30 N. | Moments must be equal: 20 N x 30 cm = W x 20 cm, so W = 30 N. |
| 3 | 1. It only changes the direction of the effort. | A fixed pulley has a fixed axle and equal tension on both sides of the rope, so the effort equals the load and only the direction changes. |
| 4 | 50 N. | Two rope sections share the load, so the mechanical advantage is 2 and 100 N / 2 = 50 N. |
| 5 | 5. | For a ramp the mechanical advantage is length / height = 5 m / 1 m = 5. |
| 6 | Twice as fast. | Teeth and speed are inversely related, so 40 / 20 = 2 and the small gear turns twice as fast. |
| 7 | 200 J. | Work = force x displacement along the force = 50 N x 4 m = 200 J. |
| 8 | 30 W. | Power = work / time = 600 J / 20 s = 30 W. |
| 9 | 2 m. | A movable pulley halves the effort but doubles the rope pulled, so 2 x 1 m = 2 m. |
| 10 | The joule (J), which is 1 N m. | One joule is the work done by 1 N moving 1 m along its own direction, so J = N m. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
After finishing, copy the three formulas for moment, work and power with their units, and give one everyday example of each.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



