S3 Science: Forces and Simple Machines – Paper 2 (Intermediate, 10 items)
- 2026-11-16
← Back to the Secondary Science chapter index
S3 Science: Forces and Simple Machines – Paper 2 (Intermediate, 10 items)
Work backwards to an effort arm, then use efficiency and actual mechanical advantage with multi-rope pulley systems and gear reduction.
Focus Finding the effort position from moments, supporting rope sections as the advantage, efficiency as useful work over input work, subtracting moments on one axis, efficiency times ideal advantage giving the actual advantage, reduction ratios, power calculations.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 3 · Challenge 2 · Error redo 1 |
| Chapter | Chapter: S3 Science: Forces and Simple Machines |
| Level | Intermediate, 10 items, about 25 minutes |
02 Questions (10 items)
- FoundationA 15 N effort lifts a 60 N stone 0.2 m from the pivot. How far from the pivot must the effort act?
- FoundationA pulley system has two rope sections supporting the movable pulley. What effort lifts 240 N?
- FoundationA 80 N load is pushed 4 m up a ramp to a height of 1 m with 25 N. What is the efficiency?
- FoundationA 30-tooth gear drives a 60-tooth gear. What fraction of the input speed is the output?
- IntermediateClockwise moments total 12 N m and anticlockwise 8 N m. What is the net moment?
- IntermediateFour rope sections support the movable pulley. What effort lifts 400 N, and how much rope is pulled per metre raised?
- IntermediateA pulley system has an ideal mechanical advantage of 5 and an efficiency of 60%. What effort lifts 300 N?
- ChallengeA ramp is 6 m long and 1.5 m high. What is its mechanical advantage?
- ChallengeA crane does 1 200 J of work in 5 s. What is its power?
- Error redoA 12-tooth gear drives a 36-tooth gear. What is the reduction ratio?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 0.8 m. | 60 N x 0.2 m = 15 N x d, so d = 12 / 15 = 0.8 m. |
| 2 | 120 N. | The mechanical advantage equals the two supporting sections, so 240 N / 2 = 120 N. |
| 3 | 80%. | Useful work is 80 N x 1 m = 80 J and input work is 25 N x 4 m = 100 J, so 80 / 100 = 80%. |
| 4 | One half. | 60 / 30 = 2, so the output turns at half the speed but with double the torque. |
| 5 | 4 N m clockwise. | Moments about the same axis subtract: 12 – 8 = 4 N m in the direction of the larger clockwise moment. |
| 6 | 100 N and 4 m of rope. | The mechanical advantage is 4, so 400 / 4 = 100 N, and the rope is pulled four times the height gained. |
| 7 | 100 N. | Actual mechanical advantage = 5 x 0.6 = 3, so 300 N / 3 = 100 N. |
| 8 | 4. | 6 m / 1.5 m = 4, so the effort is one quarter of the load. |
| 9 | 240 W. | 1 200 J / 5 s = 240 W. |
| 10 | 3 to 1. | 36 / 12 = 3, so the output turns at one third of the input speed with three times the torque. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
After finishing, write one efficiency = useful work / input work calculation of your own with made-up numbers and check the result.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



