S3 Science Metal Corrosion and the Reactivity Series (Intermediate)
- 2026-11-22
← Back to the Secondary Science chapter index
S3 Science Metal Corrosion and the Reactivity Series (Intermediate)
S3 Science – corrosion intermediate
S3 Science – corrosion intermediate S3 Science – corrosion intermediate
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 30 minutes |
| Difficulty mix | Intermediate 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S3 . corrosion intermediate |
02 Questions (10 items)
- Intermediate6.5 g of zinc reacts completely with excess dilute acid. What volume of hydrogen, in dm3, forms at room conditions? (Zn 65, molar volume 24 dm3)
- Intermediate12 g of magnesium burns completely. What mass of magnesium oxide forms? (Mg 24, MgO 40)
- Intermediate5.6 g of iron rusts completely to Fe2O3. What is the mass of the oxide? (Fe 56, Fe2O3 160)
- IntermediateHow many grams of oxygen are needed to turn 56 g of iron completely into Fe2O3?
- IntermediateWhat change is seen when an iron nail is placed in copper sulphate solution?
- IntermediateA 10 g copper sheet is galvanised and then weighs 12 g. What is the mass of the zinc layer?
- Intermediate0.4 mol of dilute hydrochloric acid reacts with excess magnesium. What volume of hydrogen forms? (molar volume 24 dm3)
- Intermediate11.2 g of iron reacts with excess dilute acid. How many moles of hydrogen form? (Fe 56)
- IntermediateFor the same iron sheet, which corrodes faster: dry air or salt water?
- IntermediateAluminium is more reactive than iron yet lasts better outdoors. Why?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 2.4 dm3. | 6.5 divided by 65 gives 0.1 mol of zinc, hence 0.1 mol of hydrogen, and 0.1 times 24 is 2.4 dm3. |
| 2 | 20 g. | 0.5 mol of magnesium gives 0.5 mol of oxide, and the mass includes oxygen taken from the air. |
| 3 | 8 g. | 0.1 mol of iron gives 0.05 mol of oxide, which is 8 g, the extra 2.4 g being oxygen. |
| 4 | 24 g. | 1 mol of iron needs 0.75 mol of oxygen, and with a molar mass of 32 that is 24 g. |
| 5 | A reddish brown coating of copper appears and the blue colour fades. | Iron is more reactive than copper and displaces it, while iron ions pass into the solution. |
| 6 | 2 g. | The coating mass is the final mass minus the mass of the copper sheet, so 12 minus 10 is 2 g. |
| 7 | 4.8 dm3. | Two moles of acid give one mole of hydrogen, so 0.4 mol gives 0.2 mol, and 0.2 times 24 is 4.8 dm3. |
| 8 | 0.2 mol. | Iron and the acid react in a one to one ratio, and 11.2 divided by 56 gives 0.2 mol. |
| 9 | Salt water. | Salt water conducts better and speeds up electron transfer, so the corrosion is much faster. |
| 10 | A thin dense layer of aluminium oxide forms on the surface. | The oxide layer keeps oxygen and water away from the metal below, so the reaction stops. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S3 Science courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



