/en-tutor-prep-s3-science-metal-corrosion-reactivity-series-practice-3/
/en-tutor-prep-s3-science-metal-corrosion-reactivity-series-practice-3/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S3 Science Metal Corrosion and the Reactivity Series (Challenge)

S3 Science Metal Corrosion and the Reactivity Series (Challenge)

  • 2026-11-22

S3 Science Metal Corrosion and the Reactivity Series (Challenge)

S3 Science – corrosion challenge

S3 Science – corrosion challenge S3 Science – corrosion challenge

01 Paper details (check answers afterwards)

Item Detail
Questions 10 questions
Suggested time 35 minutes
Difficulty mix Challenge 10
Chapter Chapter: S3 Science – Wave Properties and the EM Spectrum
Level S3 . corrosion challenge

02 Questions (10 items)

  1. Challenge20 g of impure zinc gives 6.0 dm3 of hydrogen with excess acid. What is the percentage purity of the zinc? (Zn 65, molar volume 24 dm3)
  2. ChallengeHow many grams of iron are there in 10 g of rust, counted as Fe2O3?
  3. ChallengeA 20 g iron plate becomes 21.6 g after reacting fully with copper sulphate solution. What mass of copper is deposited? (Fe 56, Cu 64)
  4. Challenge5.4 g of aluminium reacts with excess iron oxide in the thermite reaction. What mass of iron forms? (Al 27, Fe 56)
  5. ChallengeHow much iron oxide is needed for that thermite reaction? (Fe2O3 160)
  6. ChallengeA 100 cm2 iron sheet is coated with 5 g of zinc. What is the average thickness of the layer? (zinc 7.14 g/cm3)
  7. ChallengeA sealed 500 cm3 vessel holds air with 21 per cent oxygen. Iron rusts until the oxygen is used up. By how much does the gas volume fall?
  8. ChallengeBurning 4.8 g of magnesium should give 8 g of oxide but only 7.2 g is obtained. What is the yield?
  9. ChallengeExcess iron is put into 0.1 mol of copper sulphate solution. What mass of copper forms and how much iron dissolves? (Cu 64, Fe 56)
  10. ChallengeZinc and copper plates joined by a wire are dipped in dilute acid. Which plate dissolves?

03 Answers and one-line notes

# Answer One-line note
1 81.25 per cent. 6.0 divided by 24 gives 0.25 mol of hydrogen, so 16.25 g of zinc, and that is 81.25 per cent of 20 g.
2 7 g. The mass fraction of iron in Fe2O3 is 112 over 160, that is 0.7, so 10 g contains 7 g.
3 12.8 g. Each mole of iron replaced by a mole of copper adds 8 g, so 1.6 g means 0.2 mol and 12.8 g of copper.
4 11.2 g. Two moles of aluminium give two moles of iron, and 5.4 g is 0.2 mol, so 0.2 mol of iron forms.
5 16 g. 0.2 mol of aluminium needs only 0.1 mol of the oxide, and 0.1 times 160 is 16 g.
6 0.007 cm. 5 divided by 7.14 gives about 0.7 cm3, and dividing by 100 cm2 gives 0.007 cm, about 70 micrometres.
7 105 cm3. 500 times 0.21 is 105, and that is the volume of oxygen removed from the gas mixture.
8 90 per cent. The yield is the actual mass over the theoretical mass, and 7.2 over 8 is 0.9.
9 6.4 g of copper and 5.6 g of iron. One mole of copper is 64 g and one mole of iron is 56 g, so 0.1 mol gives 6.4 g and 5.6 g.
10 The zinc plate. The more reactive zinc is the negative electrode and loses electrons, while hydrogen bubbles form on the copper.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Join our S3 Science courseTutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →