S4 Chemistry Laboratory Safety and Waste Disposal Practice (Paper 1: Basics)
- 2026-11-17
S4 Chemistry Laboratory Safety and Waste Disposal Practice (Paper 1: Basics)
Ten items on the basics: reading hazard labels, safe heating and dilution, handling waste acid and broken glass, plus simple neutralisation and dilution calculations.
From hazard labels to the waste bottle Paper 1 covers four everyday rules: read the hazard warning label, point a heated test tube away from everyone, always pour acid into water when diluting, and collect waste acid and broken glass separately. The calculations dilute 25.0 cm3 of 2.0 M acid to 100 cm3 for 0.50 M, neutralise 0.050 mole of acid with 2.0 g of sodium hydroxide, and total six groups of waste at 270 cm3, that is 0.27 dm3.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 3 · Challenge 2 · Error redo 1 |
| Chapter | Chapter: S4 Chemistry: Laboratory Safety and Waste Disposal |
| Level | Basics (S4) |
02 Questions (10 items)
- FoundationWhat does the corrosive hazard warning label mean?
- FoundationWhere should the mouth of a test tube point when a liquid inside is being heated?
- FoundationIn what order should concentrated sulphuric acid be diluted?
- FoundationWhat is the correct way to smell a gas?
- IntermediateWhat should be done with leftover concentrated acid?
- IntermediateWhich container should broken glassware go into?
- Intermediate25.0 cm3 of 2.0 M hydrochloric acid is diluted with water to 100 cm3. What is the new concentration?
- ChallengeA spill contains 0.050 mole of hydrochloric acid. What mass of sodium hydroxide is needed to neutralise it (Mr: NaOH 40)?
- ChallengeSix groups of students each produce 45 cm3 of waste liquid. What is the total volume in dm3?
- Error redoA student says pouring water into concentrated acid is quicker. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | It burns skin and eyes and attacks metal surfaces | Corrosive substances destroy living tissue, so gloves and goggles are essential. |
| 2 | Away from yourself and from other people | The liquid can bump and spurt out suddenly, so the mouth must never face anyone. |
| 3 | Pour the acid slowly into the water while stirring | Water is less dense, so adding the acid into water avoids local overheating and spitting. |
| 4 | Waft the gas gently towards your nose with your hand | Wafting draws in only a trace of the gas; never put your nose close to the container. |
| 5 | Pour it into a labelled bottle for acidic chemical waste | Concentrated acid must never go down the sink; it is collected as chemical waste for a licensed contractor. |
| 6 | A designated broken glass bin | Broken glass cuts through refuse bags, so it must not be mixed with ordinary rubbish. |
| 7 | 0.50 M | No solute is added or lost, so 2.0 multiplied by 25.0 and divided by 100.0 gives 0.50. |
| 8 | 2.0 g | A monobasic acid needs an equal number of moles of alkali, so 0.050 times 40 gives 2.0 g. |
| 9 | 0.27 dm3 | Six times 45 gives 270 cm3, which is 0.27 dm3. |
| 10 | The acid must be poured into the water, never the water into the acid | Water poured onto concentrated acid boils suddenly at the surface and throws acid out of the container. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Paper 2 adds halogenated waste, heavy metal waste and fume cupboard applications.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



