S4 Chemistry Laboratory Safety and Waste Disposal Practice (Paper 2: Intermediate)
- 2026-11-17
S4 Chemistry Laboratory Safety and Waste Disposal Practice (Paper 2: Intermediate)
Ten intermediate items: separating halogenated and heavy metal waste, fume cupboard and indirect heating requirements, and applied neutralisation, dilution and volume calculations.
Segregating waste and applying the numbers Paper 2 puts the rules into context: halogenated organic waste is collected separately, copper(II) sulphate belongs in heavy metal waste, toxic gases are prepared in a fume cupboard, and flammable solvents are heated indirectly. The calculations neutralise 25.0 cm3 of 0.10 M acid with 25.0 cm3 of 0.20 M alkali, use 200 cm3 of alkali for 0.020 mole of acid, total 320 cm3 from eight groups and dilute 50.0 cm3 of 0.80 M to 200 cm3.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 3 · Challenge 2 · Error redo 1 |
| Chapter | Chapter: S4 Chemistry: Laboratory Safety and Waste Disposal |
| Level | Intermediate (S4) |
02 Questions (10 items)
- FoundationHow should a halogenated organic waste such as dichloromethane be handled?
- FoundationWhat should be done with leftover copper(II) sulphate solution?
- FoundationWhere should a toxic or irritant gas be prepared?
- FoundationWhat volume of 0.20 M sodium hydroxide neutralises 25.0 cm3 of 0.10 M sulphuric acid?
- IntermediateWhat volume of 0.10 M sodium hydroxide neutralises 0.020 mole of hydrochloric acid?
- IntermediateEight groups of students each produce 40 cm3 of waste liquid. What is the total volume?
- Intermediate50.0 cm3 of 0.80 M solution is diluted to 0.20 M. What final volume is needed?
- ChallengeWhy must a flammable solvent not be heated with a Bunsen flame directly?
- ChallengeThree bottles each hold 2.5 dm3 of waste liquid. What is the total volume?
- Error redoA student pours copper(II) sulphate solution down the sink and flushes it with plenty of water. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Collect it in a separate halogenated organic waste bottle | Halogenated waste gives off harmful gases when incinerated, so it is kept apart from other organic waste. |
| 2 | Pour it into a heavy metal waste bottle | Copper ions are toxic to aquatic life, so the solution must never go down the sink. |
| 3 | In a fume cupboard | The fume cupboard draws the gas away so that the worker does not breathe it in. |
| 4 | 25.0 cm3 | The acid is 0.0025 mole, needing 0.0050 mole of alkali, which is 0.0050 divided by 0.20 dm3. |
| 5 | 200 cm3 | Dividing 0.020 by 0.10 gives 0.200 dm3, which is 200 cm3. |
| 6 | 320 cm3 | Eight times 40 gives 320 cm3. |
| 7 | 200 cm3, so 150 cm3 of water is added | Multiplying 0.80 by 50.0 and dividing by 0.20 gives 200 cm3, of which 150 cm3 is added water. |
| 8 | A water bath or heating mantle should be used instead | Flammable vapour ignites on contact with a flame, so heating must be indirect. |
| 9 | 7.5 dm3 | Three times 2.5 gives 7.5 dm3. |
| 10 | Copper ions are heavy metal pollutants and must be collected as chemical waste | Dilution lowers the concentration only; the heavy metal ions still contaminate the water. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Paper 3 then handles titration-style neutralisation, waste masses and disposal costs.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



