/en-tutor-prep-s4-chemistry-metals-reactivity-series-practice-3/
/en-tutor-prep-s4-chemistry-metals-reactivity-series-practice-3/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S4 Chemistry Reactivity Practice (Paper 3: Challenge)

S4 Chemistry Reactivity Practice (Paper 3: Challenge)

  • 2026-11-17

S4 Chemistry Reactivity Practice (Paper 3: Challenge)

Ten combined items: deducing the series from displacement results, comparing hydrogen from equal masses, mass changes in redox and choosing an extraction method.

Deducing the series from data and handling mass changes Paper 3 treats the series as a reasoning tool: two displacement results fix the place of an unknown metal X, then equal masses of magnesium and zinc are compared for hydrogen. The calculations cover 32 g of iron(III) oxide reduced to iron, the net mass change of copper in silver nitrate, the oxide formed from partly oxidised magnesium and the zinc needed for a given solution. The close explains aluminium in a blast furnace, stainless steel, native gold and the myth that reactive metals came first.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 3 · Challenge 2 · Error redo 1
Chapter Chapter: S4 Chemistry: Metals and the Reactivity Series
Level Challenge (S4)

02 Questions (10 items)

  1. FoundationMetal X displaces zinc from zinc sulphate but cannot displace magnesium from magnesium sulphate. Where does X sit in the series?
  2. Foundation1.0 g of magnesium and 1.0 g of zinc each react with excess dilute acid. Which gives more hydrogen, and by roughly how many times?
  3. Foundation32 g of iron(III) oxide (Mr 160) is completely reduced by carbon monoxide. What mass of iron forms?
  4. Foundation0.05 mol of copper reacts with excess silver nitrate solution. By how much does the mass of the copper piece increase? (Ar: Cu 64, Ag 108)
  5. Intermediate12 g of magnesium is heated in air and the mass rises to 16 g. How much magnesium oxide formed, assuming only MgO is produced?
  6. IntermediateWhy can aluminium oxide not be reduced to aluminium in a blast furnace?
  7. IntermediateHow much zinc displaces all the copper from 25 cm3 of 0.5 M copper(II) sulphate?
  8. ChallengeWhy does stainless steel rust far less than ordinary steel?
  9. ChallengeUse the series to explain why gold is found uncombined in nature.
  10. Error redoA student thinks the most reactive metals were used by humans first. What is wrong?

03 Answers and one-line notes

# Answer One-line note
1 Below magnesium and above zinc Displacing zinc means X is more reactive than zinc, and failing against magnesium means it is less reactive than magnesium.
2 Magnesium, about 2.7 times as much The moles are 1 ÷ 24 = 0.0417 against 1 ÷ 65 = 0.0154, a ratio of 65 ÷ 24 = 2.7.
3 22.4 g The oxide is 32 ÷ 160 = 0.2 mol, which gives 0.4 mol of iron, so 0.4 × 56 = 22.4 g.
4 7.6 g Cu + 2AgNO3 → Cu(NO3)2 + 2Ag gives 0.1 mol of silver, 10.8 g, while 3.2 g of copper dissolves, a net gain of 7.6 g.
5 10 g The 4 g gain is all oxygen, that is 0.25 mol, so 0.25 mol of MgO forms, which is 10 g.
6 Aluminium is more reactive than carbon, so carbon cannot reduce it Aluminium oxide is very stable and only electrolysis of the molten oxide breaks it down.
7 0.81 g The copper is 0.025 × 0.5 = 0.0125 mol, so the zinc mass is 0.0125 × 65 = 0.8125 g.
8 It contains chromium and nickel, and a dense oxide layer on the surface stops further corrosion That protective layer keeps air and water away from the metal, so corrosion slows sharply.
9 Gold is extremely unreactive and hardly combines with oxygen or other substances The lower the reactivity, the harder it is to oxidise, so gold and silver are usually found as the metal itself.
10 The more reactive a metal, the harder it is to extract, so less reactive metals such as copper and gold came first Copper and bronze predate iron tools because copper is easier to obtain from its ore.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Paper 4 then retries the concepts that go wrong most often.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →