S4 Geography River Landforms Practice 2: Intermediate
- 2026-11-20
S4 Geography River Landforms Practice 2: Intermediate
Bring in hydraulic radius, sediment load and flood return period to link calculation with landform processes.
River landforms intermediate: hydraulic radius, load and return period These ten items place calculations in real reaches: hydraulic radius, velocity, gradient ratio, suspended load and flood return period, alongside the four transport processes and floodplain features.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 3 · Intermediate 3 · Challenge 3 · Error redo 1 |
| Chapter | Chapter: S4 Geography: River Landforms |
| Level | Intermediate, 10 items, about 25 minutes |
02 Questions (10 items)
- FoundationA river cross-section has area 25 m2 and wetted perimeter 14 m. Find the hydraulic radius to two decimal places.
- FoundationDischarge is 36 m3 per second, width 18 m and mean depth 1.5 m. Find the mean velocity to two decimal places.
- FoundationThe upper course falls 40 m in 5 km while the lower course falls 20 m in 20 km. Find the ratio of the two gradients.
- IntermediateA river carries 250 000 tonnes of sediment a year, of which 70% is suspended load. Find the annual suspended load.
- IntermediateA reach has a flood return period of 50 years. Find the chance of a flood of that size in any one year.
- IntermediateName the four ways a river transports its load.
- ChallengeWhich two processes together build a floodplain?
- ChallengeHow does a natural levee form along a river bank?
- ChallengeWhat commonly causes river rejuvenation, and which feature then appears in the bed?
- Error redoError rework: a reach has cross-sectional area 42 m2 and wetted perimeter 21 m. Find the hydraulic radius and name the common mistake.
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 1.79 m | Hydraulic radius is area divided by wetted perimeter: 25 / 14 is about 1.79 m. |
| 2 | 1.33 m per second | The area is 18 x 1.5 = 27 m2, so velocity is 36 / 27 which is about 1.33 m per second. |
| 3 | 8 : 1 | Upper gradient is 40 / 5 = 8 m per km and lower is 20 / 20 = 1 m per km, giving 8 : 1. |
| 4 | 175 000 tonnes | Suspended load is 250 000 x 0.7 = 175 000 tonnes. |
| 5 | 0.02, that is 1 in 50 | Probability is 1 divided by the return period: 1 / 50 = 0.02. |
| 6 | Traction, saltation, suspension and solution | Pebbles roll along the bed, sand grains bounce, fine mud stays in suspension and dissolved matter travels in solution. |
| 7 | Lateral erosion and deposition by floods | Lateral erosion widens the valley floor and overbank floods lay down fine sediment across it. |
| 8 | Coarser sediment is dumped on the banks during repeated floods | Flood water slows sharply at the bank, so coarser sand settles there and builds up over many floods. |
| 9 | A fall in sea level or uplift of the land; a knick point appears | A lower base level restarts downward erosion, so a knick point forms and migrates upstream. |
| 10 | 2 m; the common mistake is dividing perimeter by area | Area divided by wetted perimeter gives 42 / 21 = 2 m; the reversed division gives 0.5, which is wrong. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



