S4 Physics Heat Capacity Practice (Paper 1: Basics)
- 2026-11-17
S4 Physics Heat Capacity Practice (Paper 1: Basics)
Ten foundation items: the definition and unit of specific heat capacity, energy calculations, a reverse temperature rise, and simple power and efficiency work.
Building the basis of heat calculations from definition and formula Paper 1 fixes the definition and the unit first, then applies E = mcΔT forwards for water and aluminium and backwards for a temperature rise. The later items add power and efficiency to time a kettle, and the paper ends with the classic mistake of using the final temperature instead of the rise.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 3 · Challenge 2 · Error redo 1 |
| Chapter | Chapter: S4 Physics: Heat Capacity and Latent Heat |
| Level | Basics (S4) |
02 Questions (10 items)
- FoundationWhat is the definition of specific heat capacity?
- FoundationHow much energy is needed to heat 2 kg of water from 20 °C to 70 °C? (c of water = 4200 J kg⁻¹ K⁻¹)
- FoundationWhat is the SI unit of specific heat capacity?
- FoundationHow much energy heats 0.5 kg of aluminium from 30 °C to 70 °C? (c of aluminium = 900 J kg⁻¹ K⁻¹)
- IntermediateBy how much does the temperature of 3 kg of water rise when it absorbs 2.52×10⁵ J?
- IntermediateHow much energy heats 1.5 kg of oil from 10 °C to 60 °C? (c of oil = 2000 J kg⁻¹ K⁻¹)
- IntermediateWith the same mass and the same heater power, does a substance with a larger specific heat capacity warm up faster or more slowly?
- ChallengeA 2000 W kettle heats 1.5 kg of water from 20 °C to 60 °C. Ignoring losses, how long does it take?
- ChallengeIf only 80% of the same kettle power reaches the water, how long does the same heating take?
- Error redoA student works out the energy for 2 kg of water heated from 20 °C to 70 °C as 2 × 4200 × 70. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | The energy needed to raise the temperature of 1 kg of a substance by 1 K | The definition fixes three things: one kilogram, a rise of one kelvin and energy measured in joules. |
| 2 | 4.2×10⁵ J | The rise is 50 K, so 2 × 4200 × 50 = 420 000 J. |
| 3 | J kg⁻¹ K⁻¹ | Energy divided by mass and by temperature rise gives joules per kilogram per kelvin. |
| 4 | 1.8×10⁴ J | A rise of 40 K gives 0.5 × 900 × 40 = 18 000 J. |
| 5 | 20 K | Rearranging E = mcΔT gives 252 000 ÷ (3 × 4200) = 20 K. |
| 6 | 1.5×10⁵ J | The 50 K rise gives 1.5 × 2000 × 50 = 150 000 J. |
| 7 | More slowly | The same energy fills a larger capacity per kilogram per kelvin, so the rise is smaller. |
| 8 | 126 s | E = 1.5 × 4200 × 40 = 252 000 J, so t = 252 000 ÷ 2000 = 126 s. |
| 9 | 157.5 s | The input needed is 252 000 ÷ 0.8 = 315 000 J, so t = 315 000 ÷ 2000 = 157.5 s. |
| 10 | The final temperature 70 was used instead of the 50 K rise, so the answer is too large | The ΔT in the formula is the change in temperature, never the final reading alone. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
After paper 1, paper 2 moves on to latent heat, changes of state and heating curves.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



