S4 Physics Latent Heat Practice (Paper 2: Intermediate)
- 2026-11-17
S4 Physics Latent Heat Practice (Paper 2: Intermediate)
Ten items on changes of state: the definition of specific latent heat, melting and condensing energy, plateaus on heating curves and two-stage energy sums.
Explaining a constant temperature during a change of state Paper 2 concentrates on E = ml: melting ice, condensing steam and vapourizing a whole kettle of water, with a comparison against the energy of a temperature rise. The middle items ask why the reading stays flat during melting, and the paper closes with heater timing and a two-stage ice problem.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 3 · Challenge 2 · Error redo 1 |
| Chapter | Chapter: S4 Physics: Heat Capacity and Latent Heat |
| Level | Intermediate (S4) |
02 Questions (10 items)
- FoundationWhat is the definition of specific latent heat?
- FoundationHow much energy melts 0.2 kg of ice at 0 °C? (latent heat of fusion = 3.34×10⁵ J kg⁻¹)
- FoundationIce is heated throughout melting yet the reading stays at 0 °C. Why?
- FoundationHow much energy is released when 0.05 kg of steam condenses at 100 °C? (latent heat of vaporisation = 2.26×10⁶ J kg⁻¹)
- IntermediateHow much energy vapourizes 0.4 kg of water at 100 °C?
- IntermediateHow much energy melts 500 g of ice at 0 °C into water at 0 °C?
- IntermediateHow much energy heats 2 kg of water from 20 °C to 100 °C and then vapourizes all of it?
- ChallengeHow long does a 500 W heater take to melt 0.5 kg of ice at 0 °C?
- ChallengeHow much energy takes 0.2 kg of ice at −10 °C to water at 0 °C? (c of ice = 2100 J kg⁻¹ K⁻¹)
- Error redoA student expects the temperature of melting ice to keep rising. What is wrong with that?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | The energy needed to change the state of 1 kg of a substance at constant temperature | The temperature stays flat while the energy overcomes the attraction between particles. |
| 2 | 6.68×10⁴ J | Melting involves no temperature change, so only E = ml = 0.2 × 3.34×10⁵ counts. |
| 3 | The energy breaks the structure of the ice instead of raising the temperature | Latent heat finishes the change of state, so the reading climbs only after all the ice has melted. |
| 4 | 1.13×10⁵ J | Condensing releases the same energy that vapourizing absorbs, so E = 0.05 × 2.26×10⁶. |
| 5 | 9.04×10⁵ J | E = ml = 0.4 × 2.26×10⁶ = 904 000 J, with no change in temperature. |
| 6 | 1.67×10⁵ J | Convert the mass to 0.5 kg first, then E = 0.5 × 3.34×10⁵ = 167 000 J. |
| 7 | About 5.192×10⁶ J | Warming takes 2 × 4200 × 80 = 672 000 J and vapourizing takes 2 × 2.26×10⁶ = 4 520 000 J; add the two. |
| 8 | 334 s | E = 0.5 × 3.34×10⁵ = 167 000 J, so t = 167 000 ÷ 500 = 334 s. |
| 9 | 7.1×10⁴ J | Warming costs 0.2 × 2100 × 10 = 4200 J and melting costs 66 800 J, giving 71 000 J in total. |
| 10 | During melting the energy becomes latent heat, so the temperature stays flat until all the ice has melted | That flat section on the heating curve exists for exactly this reason. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Paper 3 then applies efficiency, mixing and graph work.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



