S4 Physics Thermal Practice (Paper 3: Challenge)
- 2026-11-17
S4 Physics Thermal Practice (Paper 3: Challenge)
Ten combined items: cooling curve plateaus, comparing units, the gap between heating and vapourizing, efficiency, mixing temperatures and finding c from a graph.
Combining the energy of a temperature change with latent heat Paper 3 needs both mcΔT and ml. It starts from the plateau of a cooling curve, compares the energy of a rise against vapourizing, then works through kettle efficiency, mixing two masses of water and cooling with ice, and finally finds c from the slope of a heating graph before closing with a misuse of the latent heat formula.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 3 · Challenge 2 · Error redo 1 |
| Chapter | Chapter: S4 Physics: Heat Capacity and Latent Heat |
| Level | Challenge (S4) |
02 Questions (10 items)
- FoundationWhat does the flat plateau on a cooling curve represent?
- FoundationHow do the units of specific heat capacity and specific latent heat differ?
- FoundationHow much energy heats 0.15 kg of water from 20 °C to 100 °C?
- FoundationHow much energy vapourizes the same 0.15 kg of water at 100 °C, and how does it compare with the 80 K rise?
- IntermediateA 1400 W kettle is 90% efficient. How long does it take to heat 0.6 kg of water from 20 °C to 100 °C?
- Intermediate0.3 kg of water at 90 °C is mixed with 0.6 kg of water at 30 °C. Ignoring losses, what is the final temperature?
- Intermediate0.05 kg of ice at 0 °C is added to 0.3 kg of water at 40 °C. What is the temperature once all the ice has melted?
- ChallengeAn 800 W heater raises the temperature of 2 kg of liquid by 10 K in 100 s. Find its specific heat capacity.
- ChallengeA 1000 W heater runs for 60 s and raises 0.5 kg of water by only 10 K. What is the efficiency?
- Error redoA student melts 0.5 kg of ice but writes 0.5 × 3.34×10⁵ × 0. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | The substance is freezing, releasing latent heat while the temperature stays constant | The length of the plateau reflects the latent heat, not the specific heat capacity. |
| 2 | J kg⁻¹ K⁻¹ against J kg⁻¹ | Latent heat involves no temperature rise, so its unit carries no kelvin. |
| 3 | 5.04×10⁴ J | 0.15 × 4200 × 80 = 50 400 J. |
| 4 | 3.39×10⁵ J, about 6.7 times the energy of the temperature rise | 0.15 × 2.26×10⁶ = 339 000 J, far more than 50 400 J. |
| 5 | 160 s | The useful energy is 201 600 J and the input is 224 000 J, so t = 224 000 ÷ 1400 = 160 s. |
| 6 | 50 °C | (0.3 × 90 + 0.6 × 30) ÷ 0.9 = 50 °C. |
| 7 | About 22.9 °C | The water releases 50 400 J, melting uses 16 700 J and the remaining 33 700 J warms 0.35 kg, giving 22.9 °C. |
| 8 | 4000 J kg⁻¹ K⁻¹ | E = 800 × 100 = 80 000 J, so c = 80 000 ÷ (2 × 10) = 4000. |
| 9 | 35.0% | The water gains 21 000 J out of 60 000 J supplied, so 21 000 ÷ 60 000 = 0.35. |
| 10 | Multiplying by 0 assumes no energy is needed; melting uses E = ml and has nothing to do with a temperature difference | The latent heat formula has no ΔT in it, so inserting a temperature term always goes wrong. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Paper 4 then clears the recurring misconceptions one by one.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



