S5 Chemistry Calorimetry (Basic)
- 2026-11-22
S5 Chemistry Calorimetry (Basic)
S5 Chemistry basic neutralisation heat
S5 Chemistry basic neutralisation heat S5 Chemistry basic neutralisation heat
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 30 minutes |
| Difficulty mix | Foundation 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . calorimetry basics |
02 Questions (10 items)
- FoundationWhen 50.0 cm3 of 1.00 M hydrochloric acid is mixed with 50.0 cm3 of 1.00 M sodium hydroxide solution, the temperature rises by 6.8 degrees. Find the heat released in J.
- FoundationWhat is the standard enthalpy change of neutralisation?
- FoundationWhat is the approximate enthalpy change when a strong monobasic acid is neutralised by a strong monobasic alkali?
- FoundationWhich apparatus is used to measure the enthalpy change of combustion?
- FoundationIn the formula q = mcDT, which mass should be used for m?
- FoundationIs the enthalpy change of an exothermic reaction positive or negative?
- FoundationHow much heat raises the temperature of 100 g of water by 10 degrees? (c = 4.2 J g-1 K-1)
- FoundationWhat does a specific heat capacity of 4.2 J g-1 K-1 for water mean?
- FoundationWhen 0.0500 mol of hydrochloric acid is exactly neutralised by 0.0500 mol of sodium hydroxide, how many moles of water form?
- FoundationThe temperature rises by 6.8 degrees Celsius. What is the same temperature change in kelvin?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 2856 J | Total solution mass is 100 g, so q = mcDT = 100 x 4.2 x 6.8 = 2856 J. |
| 2 | The heat released when one mole of water is formed from dilute acid and dilute alkali at 298 K and 1 atm. | The definition must state one mole of water, dilute solutions and standard conditions. |
| 3 | About -57.3 kJ per mole | Both are fully ionised, so the net reaction is just H+ plus OH- giving water and the value hardly varies. |
| 4 | A bomb calorimeter | Combustion needs a sealed pressure vessel, and a bomb calorimeter burns the fuel completely. |
| 5 | The total mass of the solution | Not the mass of the solute; with a density near 1 g/cm3 the total volume in cm3 is taken as grams. |
| 6 | Negative | Exothermic means the system loses energy, so by convention the value carries a minus sign. |
| 7 | 4200 J, that is 4.2 kJ | q = mcDT = 100 x 4.2 x 10 = 4200 J. |
| 8 | One gram of water needs 4.2 J to rise by 1 K. | Specific heat capacity is quoted per gram per kelvin, so the figure is independent of mass. |
| 9 | 0.0500 mol | The ratio is 1:1, so the moles of water equal the moles of the limiting reagent. |
| 10 | 6.8 K | The Celsius and kelvin scales have the same size of degree, so a temperature difference keeps its value. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



