S5 Chemistry Calorimetry (Intermediate)
- 2026-11-22
S5 Chemistry Calorimetry (Intermediate)
S5 Chemistry neutralisation and combustion heat
S5 Chemistry neutralisation and combustion heat S5 Chemistry neutralisation and combustion heat
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 35 minutes |
| Difficulty mix | Intermediate 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . calorimetry intermediate |
02 Questions (10 items)
- Intermediate25.0 cm3 of 1.00 M hydrochloric acid is mixed with 25.0 cm3 of 1.00 M sodium hydroxide and the temperature rises by 6.8 degrees. Find the enthalpy change per mole of water formed.
- IntermediateIf the heat absorbed by the calorimeter itself is ignored, is the measured heat release too large or too small?
- IntermediateBurning 0.460 g of ethanol (Mr = 46) raises the temperature of 200 g of water by 12.0 degrees. Find the enthalpy change of combustion in kJ per mole.
- IntermediateWhy is the measured enthalpy of combustion usually less exothermic than the data book value?
- IntermediateIf concentrated sulphuric acid is used instead of dilute acid, how does the measured heat release change?
- Intermediate25.0 cm3 of 0.200 M copper(II) sulphate solution reacts with excess zinc powder and the temperature rises by 8.0 degrees. Find the enthalpy change in kJ per mole.
- IntermediateWhy is the mixture stirred and an insulated cup used in calorimetry?
- IntermediateWhen 0.0500 mol of water is formed, 2856 J is released. Find the enthalpy change of neutralisation in kJ per mole.
- IntermediateTwo runs of the same experiment give temperature rises of 6.7 and 6.9 degrees. Why take the average?
- IntermediateA student divides 2856 J by 0.100 mol and gets 28.6 kJ/mol. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | -57.1 kJ/mol | q = 50 x 4.2 x 6.8 = 1428 J and 0.0250 mol of water forms, so 1428 / 0.0250 = 57.1 kJ per mole. |
| 2 | Too small | Some heat is taken up by the cup or lost to the surroundings, so the measured temperature rise is low. |
| 3 | About -1008 kJ/mol | q = 200 x 4.2 x 12.0 = 10080 J and 0.460 / 46 = 0.0100 mol, so 10080 / 0.0100 = 1008 kJ per mole. |
| 4 | Heat loss, incomplete combustion and evaporation of the fuel | All three reduce the heat actually transferred to the water, so the measured value is smaller. |
| 5 | It increases | Concentrated sulphuric acid releases heat of dilution on mixing, which adds to the neutralisation heat. |
| 6 | About -168 kJ/mol | q = 25 x 4.2 x 8.0 = 840 J and there are 0.00500 mol of copper ions, so 840 / 0.00500 = 168 kJ per mole. |
| 7 | Stirring evens out the temperature and the insulated cup cuts heat loss. | Both make the measured temperature rise closer to the true one, reducing systematic error. |
| 8 | 57.1 kJ/mol (released) | 2856 J / 0.0500 mol = 57120 J per mole = 57.1 kJ per mole. |
| 9 | To reduce random error | One result is high and the other low, so averaging cancels part of the scatter and improves reliability. |
| 10 | The division should use 0.0500 mol of water formed | The acid and alkali are 0.0500 mol each, so only 0.0500 mol of water forms; using 0.100 halves the answer. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



